Product#: 3887023

1964-78 Chevrolet, GMC Exhaust Manifold Heat Riser Valve; Small Block; Car & Truck

Reproduction exhaust manifold heat riser valve for various 1964-78 General Motors passenger cars and truck models as listed below. The heat riser valve is located between the exhaust manifold and the head pipe and is used to...

Product#: 3845304

1958-74 Chevrolet V8 Big Block; Exhaust Manifold Heat Riser With 2-1/2" Headpipe Without Valve

Replacement heat riser "blank" plate for improved flow. Note: Images are shown from the bottom (pipe) side.

Product#: 338471

1969-77 GM; Exhaust Manifold Heat Stove; Upper

OER™ reproduction exhaust manifold upper heat stove which is used with the air heat tube to preheat the air cleaner thermo-sensor. This item mounts on the RH (passenger side) exhaust manifold. The air tube is inserted...

Product#: 3890689

1967-72 Chevrolet; Exhaust Pipe Extension; Big Block; 396ci, 427ci, 454ci; 2-1/2" O.D.; Various Models

Reproduction short extension pipe which slips in between the exhaust manifold & the main header pipe and supports the exhaust pipe packing gasket. This item is manufactured in stamped steel replicating the original in quality...

Product#: 3750067

1957-79 V8 Small Block Exhaust Manifold Heat Riser, Without Valve

Stock replacement heat riser valves are available as well as "blank" plates for improved flow. {specs} Note: Images are shown from the bottom (pipe) side.

Product#: 3890382

1967-72 Chevrolet; Exhaust Pipe Extension; Small Block; 2" O.D.; Various Models

Reproduction short extension pipe which slips in between the exhaust manifold & the main header pipe and supports the exhaust pipe packing gasket. This item is manufactured in stamped steel replicating the original in quality...

Product#: 338473

1969-81 GM; Exhaust Manifold Heat Stove; Lower

This lower heat stove was originally installed on 1969-81 models. For V8 engines as listed. {specs} Camaro Applications: 1969 8 cyl. with turbo 350 1969 8 cyl. with powerglide 1971 8 cyl. 4 bbl carb 402, 454 1972 8 cyl....

Product#: 14312

1968-78 Chevrolet Big Block; Exhaust Manifold Bolt Set; 16 Pieces

Reproduction exhaust manifold bolts used on big block engines from 1968-78. These are black, hardened bolts that feature the correct flanged head, just like original. {specs} {fitment}

Product#: RE1023A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1023B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1023C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: EMR001

1957-72 V8 Exhaust Manifold Heat Riser With 2" Headpipe And Valve

Stock replacement heat riser valves are available as well as "blank" plates for improved flow. Note: Images are shown from the bottom (pipe) side.

Product#: RE1029A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: AK118B

1965-90 Chevrolet Big Block; Header Bolt Set; Polished Stainless Steel

Includes hex head bolts for 1965-90 Chevrolet big block headers. Set of 16 bolts in polished stainless finish. {fitment}

Product#: E246

1965-72 Chevrolet; Exhaust Flange; Small Block

Correct replacement exhaust flange designed for use with Chevrolet small block applications to secure the headpipe to the exhaust manifold. Each flange is manufactured to correct factory dimensions. Sold individually....

Product#: AK119B

1955-86 Chevrolet Small Block; Header Bolt Set; Polished Stainless Steel

Includes polished stainless steel hex head bolts for small block headers. Set of 12 bolts. {fitment}

Product#: E247

1962-1978 Chevrolet Exhaust Flange; 2-1/2"; Small Block HP & Big Block; 396, 402, 427, 454

Correct reproduction of the original style exhaust flange designed for use with 1962-78 Chevrolet big block 396, 402, 427, 454 models. This flange is designed to secure the headpipe to the exhaust manifold. Fits 2-1/2" head...

Product#: 66753

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 1" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 66755

PROFORM Wedge-Locking Header Bolts M8 Thread Diameter - 1.181" Long (Set of 12)

These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers bite into and grab the bottom of the bolt head and the top surface of the header. After...

Product#: 66754

PROFORM Wedge-Locking Header Bolts M8 Thread Diameter -.984" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: AK119A

1955-86 Chevrolet Small Block; Header Bolt Set; Polished Chrome

Includes polished chrome hex head bolts for small block headers. Set of 12 bolts. {fitment}

Product#: AK118A

1965-90 Chevrolet Big Block; Header Bolt Set; Polished Chrome

Includes hex head bolts for 1965-90 Chevrolet big block headers. Set of 16 bolts in polished chrome finish. {fitment}

Product#: DE010126

DEI Titanium Exhaust Wrap - 1" x 50 Foot Roll

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

Product#: RE2030A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE2030C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: 222734

Oxygen Sensor Plug M-18 Thread

Many headers for late model engines are equipped with an oxygen sensor bung in each header. When retrofitting a carburetor on late model engines, an oxygen sensor is not necessary. This plug seals the oxygen sensor bung on...

Product#: TF700375

1955-57 Chevrolet Exhaust Flange

This is a very important often forgotten item. Exhaust flange holds the head pipe to the exhaust manifold or the back side to the intermediate pipe. Applications: 1955-56 6 cylinder intermediate pipe 1957 8 cylinder

Product#: TT1009

Thermo-Tec® 1" x 15" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TF700413

1955-56 Chevrolet V8 Exhaust Manifold Heat Riser Cover Plate

Reproduction exhaust manifold heat riser cover cover plate for 1955-56 Chevy V8 Models. This plate forms the connection to the choke tube and is prone to corrosion. Replace this plate as part of your restoration to ensure...

Product#: G5073K

1971-77 Impala; 1969-81 Camaro; 1969-79 Chevy II/Nova and other GM; SB Exhaust Manifold Heat Stove Rivet Set; 4 Pieces

Reproduction exhaust manifold heat stove rivet set for various 1969-82 Chevrolet models with a small block V8 engine. This high quality hardware set features original style fasteners with the correct finish. Rest assured you...

Product#: EMR002

1959-1974 V8 Exhaust Manifold Heat Riser With 2-1/2" Headpipe SB Hi-Perf, 348/409 Hi-perf, all BB

Heat riser valves are located between the exhaust manifold and the head pipe and are used to accelerate the warm up of a cold engine. A malfunctioning or frozen valve can cause loss of power or exhaust manifold damage. Fits...

Product#: RE1029C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1029B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: K0164

1956-79 Chevrolet/GMC Small Block Ram Horn Exhaust Manifold Bolt and Washer Set, 24 pieces.

Reproduction exhaust manifold bolt & washer set for 1956-1979 models with ram horn style exhaust manifolds. Fits small block Chevrolet engines. This complete set features the correct head markings. Includes extra thick...

Product#: 66751

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 3/4" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 21103

Hedman Hedders; 3-Bolt Header Flange Reducers; 3" To 2-1/2"; Mild Steel

3-bolt flange header reducers from Hedman Hedders. These reducers have two flat mating surfaces with a gasket for a leak-free joint. Necessary gaskets and hardware included.

Product#: 66752

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 3/4" Long (Set of 16)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 66756

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 1" Long (Set of 16)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: RE2030B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray- 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: 66757

PROFORM Wedge-Locking Collector Bolts & Nuts 3/8"-16 Thread Diameter - 1" Long (Set of 6)

PROFORM Grade 8 (12.9 steel) exhaust collector bolts and nuts are designed to keep bolts from getting loose. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently...

Product#: TF700373

1955-64 Chevrolet Stainless Steel 3" RH Exhaust Manifold Stud With Nut

Replace your missing, rusted, stripped or broken exhaust manifold studs. These are often beyond repair when removing your exhaust manifold. Stainless steel with nut. 3" long. No tip. 1957 8-cyl. right side, 1955-64 6-cyl all....

Product#: TF700369

1955-56 Chevrolet Flat 2 Bolt Exhaust Flange Gasket

This is a very important often forgotten item. Exhaust flange is between the head pipe and the exhaust manifold. If this is blown-out or missing you can risk allowing cool air in which can crack a valve.

Product#: TF700374

1955-57 Chevrolet Stainless Steel 2-1/2" LH Exhaust Manifold Stud With Nut

Replace your missing, rusted, stripped or broken exhaust manifold studs. These are often beyond repair when removing your exhaust manifold. Stainless steel with nut. 2-1/2" long. No tip. 8 cyl., left side. Sold each.

Product#: TF700540

1955-56 Passenger Small Block Exhaust Manifold Bolt Locks

Get the factory look and keep the manifold bolts tight to help eliminate exhaust leaks. These original style reproduction stainless steel exhaust manifold bolt locks are for the purist who demands perfection. Sold in sets of...

Product#: TF700372

1955-56 Chevrolet V8 Stainless Steel 1-1/2" Exhaust Manifold Stud With Nut

Replace your missing, rusted, stripped or broken exhaust manifold studs. These are often beyond repair when removing your exhaust manifold. 8 cyl. Stainless steel with nut. 1-1/2" long. No tip. Sold each.

Product#: EMW001

1955-91 Chevrolet Small Block 12 Piece Exhaust Manifold Washer Set

Reproduction of the original stainless steel thick style exhaust manifold washers used on 1955-91 GM vehicles. 12 piece set. GM Full Size passenger car applications: 1955-1991 Camaro applications: 1967-1991 Chevy II/Nova...

Product#: TF700376

1957 Chevrolet 2" Pipe 3 Bolt Exhaust Flange

This is a very important often forgotten item. Exhaust flange holds the head pipe to the exhaust manifold or the back side to the intermediate pipe.

Product#: DE010128

DEI Titanium Exhaust Wrap - 1" x 15 Foot Roll

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

Product#: TF700371

1957-66 Chevrolet; 2-1/2" Exhaust Flange Gasket Pipe Packing

Reproduction heat resistant gasket installs between the head pipe and exhaust manifold outlet. Measures: 2-1/2" i.d. Fits 2-1/2" outlet exhaust manifolds.This is a very important and often forgotten item. {specs} {fitment}

Product#: 35182

1975-79 GM; Exhaust Insulator; Buick, Chevrolet, Oldsmobile, Pontiac

Correct replacement muffler support bracket insulators designed to replace the missing, broken or dry rottted originals. Buick Applications: 1975-1977 Buick Century 231ci V6 1977-1977 Buick Century 305ci V8 1975-1977 Buick...

Product#: AJ5313

1937-62 Chevrolet 6 Cylinder Fenton Header Bolt And Washer Set

Plated steel bolt and washer set for AJ513 Fenton 6 cylinder headers.

Product#: 31802

1947-72 Chevrolet; 6 Cylinder; Exhaust Pipe Flange

Replacement exhaust flange for use with various applications. Dimensions: Material: Steel Inside Diamete: 2.125" Finish: Natural Length: 4.125" Thickness: 0.62" Width: 3.25" Bolt Hole Center To Bolt Hole Center: 3.125" Flange...

Product#: 21114

Hedman Hedders; 3" Ball & Socket Header Reducers; 3" To 2-1/4"; Mild Steel

3" ball and socket style header reducers from Hedman Hedders. 2-1/4" Exhaust System, Mild Steel. Necessary hardware included. {specs}

Product#: 6272719

1969-74 Chevrolet; Air Heat Riser Tube; From Air Cleaner to Exhaust Stove

Reproduction heat rise tube for various 1969-74 Chevrolet models. The heat riser tube is manufactured to OEM specifications featuring correct design for an exact fitment. This tube extends from the air cleaner to the exhaust...

Product#: P1095

1965-70 Impala, Biscayne, Bel Air; Small Block Pypes 2.5" with 3 Bolt Flange Manifold Down Pipes; Stainless

Not all performance enthusiasts use collector-style headers, so Pypes has designed 2-1/2" downpipes for log-style, rear exit exhaust manifolds to fit your Pypes header back systems. Made from 409 stainless steel and mandrel...

Product#: TT1016

8 Cylinder Quick Wrap Exhaust Jackets

The new quick-wrap, high-velocity Exhaust Jackets™ are an innovative way to insulate and block radiant heat. The jackets cover the header tubes vertically allowing for a consistent fit. The fit allows the exhaust system...

Product#: TT1017

V6-V8 Header Manifold Blanket™

The Header Manifold Blanket™ provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material...