Product#: B1789L

1961-64 Impala, Bel Air, Biscayne; Rocker Panel Assembly; 2 Door; LH Drivers Side; EDP Coated

Reproduction of the original complete rocker panel assembly including the inner and outer rocker panel for 1961-64 Chevrolet Impala, Bel Air, and Biscayne 2-door models. Each rocker panel is manufactured in stamped steel to...

Product#: RD552203

1955 Bel Air, 150, 210; Outer Rocker Panel; 2 Door; LH Drivers Side; Weld-Thru; Factory Correct

Reproduction of the original outer rocker panel designed for use with 1955 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each rocker panel is manufactured in stamped steel to original factory specifications...

Product#: RD562204

1956 Bel Air, 150, 210; Outer Rocker Panel; 2 Door; RH Passenger Side; Weld-Thru; Factory Correct

Reproduction of the original outer rocker panel designed for use with 1956 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each rocker panel is manufactured in stamped steel to original factory specifications...

Product#: RD562203

1956 Bel Air, 150, 210; Outer Rocker Panel; 2 Door; LH Driver Side; Silver Weld-Thru Coating; Factory Correct

Reproduction of the original outer rocker panel designed for use with 1956 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each rocker panel is manufactured in stamped steel to original factory specifications...

Product#: RD572203

1957 Bel Air, 150, 210; Outer Rocker Panel; 2 Door; Drivers Side; Weld-Thru Coated; Factory Correct

Reproduction of the original outer rocker panel designed for use with 1957 Chevrolet Bel Air, One Fifty Series, and Two-Ten series models. Each rocker panel is manufactured in stamped steel to original factory specifications...

Product#: TF400365A

1955-57 Bel Air, 150, 210, Nomad, Del Ray; Inner Rocker Panel; LH Drivers Side; EDP Coated

Reproduction of the original inner rocker panel designed for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, Nomad, and Del Ray models. Each rocker panel is manufactured in stamped steel to original...

Product#: 14740A

1965-70 Impala, Bel Air, Biscayne, Caprice; Inner Rocker Panel; LH Drivers Side; EDP Coated

Reproduction of the original inner rocker panel designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne and Caprice models. Each inner rocker panel is manufactured in stamped steel to original factory specifications...

Product#: B1789R

1961-64 Impala, Bel Air, Biscayne; Rocker Panel Assembly; 2 Door; RH Passenger Side; EDP Coated

Reproduction of the original complete rocker panel assembly including the inner and outer rocker panel for 1961-64 Chevrolet Impala, Bel Air, and Biscayne 2-door models. Each rocker panel is manufactured in stamped steel to...

Product#: RD552204

1955 Bel Air, 150, 210; Outer Rocker Panel; 2 Door; RH Passenger Side; Weld-Thru; Factory Correct

Reproduction of the original outer rocker panel designed for use with 1955 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each rocker panel is manufactured in stamped steel to original factory specifications...

Product#: RD572204

1957 Bel Air, 150, 210; Outer Rocker Panel; 2 Door; Passenge Side; Weld-Thru Coated; Factory Correct

Reproduction of the original outer rocker panel designed for use with 1957 Chevrolet Bel Air, One Fifty Series, and Two-Ten series models. Each rocker panel is manufactured in stamped steel to original factory specifications...

Product#: 14741W

1965-70 Impala, Bel Air, Biscayne, Caprice; Inner Rocker Panel; RH Passenger Side; Silver Weld Thru Coated

Reproduction of the original inner rocker panel designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each panel is manufactured in quality stamped steel replicating the original in design,...

Product#: 14740W

1965-70 Impala, Bel Air, Biscayne, Caprice; Inner Rocker Panel; LH Drivers Side; Weld Thru Coated

Reproduction of the original inner rocker panel designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each panel is manufactured in quality stamped steel replicating the original in design,...

Product#: TF400366A

1955-57 Bel Air, 150, 210, Nomad, Del Ray; Inner Rocker Panel; RH Passenger Side; EDP Coated

Reproduction of the original inner rocker panel designed for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, Nomad, and Del Ray models. Each rocker panel is manufactured in stamped steel to original...

Product#: TF400965

1957 Chevy 4 Door Hardtop And Sport Sedan Outer Rocker Panel - RH

Reproduction of the complete rocker panel for 1957 four door hardtop and sport sedan models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower...

Product#: TF400364

1956-57 Chevrolet 2 Door RH Outer Rocker Panel

Reproduction full outer rocker panels for 1956-57 Chevrolet models. Each rocker is manufactured to original specifications and features correct contours. For 2 door models only. Made in the USA. Note: Shipped oversize.

Product#: TF400362

1955 Chevrolet 2 Door RH Outer Rocker Panel

Reproduction full outer rocker panels for 1955 Chevrolet models. Each rocker is manufactured to original specifications and features correct contours. For 2 door models only. Made in the USA. Note: Shipped oversize.

Product#: TF400365

1955-57 Chevrolet LH Inner Rocker Panel

Reproduction inner rocker panels for 1955-57 Chevrolet models. Feature correct gauge steel and contours. Made in USA Note: Shipped oversize.

Product#: B9358

1961-64 Impala, Bel Air, Biscayne; Outer Rocker Panel; 2 Door; RH Passenger Side

Replacement style outer rocker panel for the restorer who doesn't require a full panel. This is a flat sheetmetal service replacement style rocker panel. Each panel will completely replace the outer section only and is not...

Product#: B9357

1961-64 Impala, Bel Air, Biscayne; Outer Rocker Panel; 2 Door; LH Driver Side

Replacement style outer rocker panel for the restorer who doesn't require a full panel. This is a flat sheetmetal service replacement style rocker panel. Each panel will completely replace the outer section only and is not...

Product#: TF400375

1956-57 Chevrolet 4 Door LH Replacement Outer Rocker Panel

Commonly referred to as a slip on rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Measures 66-3/4" long. Made in the USA. Note: Shipped ove rsize.

Product#: TF400372

1955 Chevrolet 4 Door RH Replacement Outer Rocker Panel

Commonly referred to as a slip on rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Made in the USA. Note: Shipped oversize.

Product#: TF400370

1955 Chevrolet 2 Door RH Replacement Outer Rocker Panel

Commonly referred to as a "slip on" rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Goes over your existing outer rocker panel. Cosmetic Replacement. Note: Smooth...

Product#: TF400962

1957 Chevy 4 Door Sedan And Wagon Outer Rocker Panel - LH

Reproduction of the complete rocker panel for 1957 four door sedan and station wagon models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower...

Product#: TF400963

1957 Chevy 4 Door Sedan And Wagon Outer Rocker Panel - RH

Reproduction of the complete rocker panel for 1957 four door sedan and station wagon models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower...

Product#: TF400964

1957 Chevy 4 Door Hardtop And Sport Sedan Outer Rocker Panel - LH

Reproduction of the complete rocker panel for 1957 four door hardtop and sport sedan models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower...

Product#: TF400959

1956 Chevy 4 Door Sedan And Wagon Outer Rocker Panel - RH

Reproduction of the complete rocker panel for 1956 four door sedan and wagon models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower tri-vents,...

Product#: TF400958

1956 Chevy 4 Door Sedan And Wagon Outer Rocker Panel - LH

Reproduction of the outer rocker panel for 1956 four door sedan and wagon models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower tri-vents, inner...

Product#: TF400961

1956 Chevy 4 Door Hardtop And Sport Sedan Outer Rocker Panel - RH

Reproduction of the complete rocker panel for 1956 four door hardtop and sport sedan models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower...

Product#: TF400960

1956 Chevy 4 Door Hardtop And Sport Sedan; Outer Rocker Panel; LH

Reproduction of the complete rocker panel for 1956 four door hardtop and sport sedan models. Manufactured using factory gauge steel, each rocker features the forward end cap with front fender mounting tab, correct lower...

Product#: TF400363

1956-57 Chevrolet 2 Door LH Outer Rocker Panel

Reproduction full outer rocker panels for 1956-57 Chevrolet models. Each rocker is manufactured to original specifications and features correct contours. For 2 door models only. Made in the USA. Note: Shipped oversize.

Product#: TF400361

1955 Chevrolet 2 Door LH Outer Rocker Panel

Reproduction full outer rocker panels for 1955 Chevrolet models. Each rocker is manufactured to original specifications and features correct contours. For 2 door models only. Made in the USA. Note: Shipped oversize.

Product#: TF400366

1955-57 Chevrolet RH Inner Rocker Panel

Reproduction inner rocker panels for 1955-57 Chevrolet models. Feature correct gauge steel and contours. Made in USA Note: Shipped oversize.

Product#: TF400376

1956-57 Chevrolet 4 Door RH Replacement Outer Rocker Panel

Commonly referred to as a slip on rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Made in the USA. Note: Shipped oversize.

Product#: TF400371

1955 Chevrolet 4 Door LH Replacement Outer Rocker Panel

Commonly referred to as a slip on rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Made in the USA. Note: Shipped oversize.

Product#: TF400374

1956-57 Chevrolet 2 Door RH Replacement Outer Rocker Panel

Commonly referred to as a slip on rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Made in the USA. Note: Shipped oversize.

Product#: TF400373

1956-57 Chevrolet 2 Door LH Replacement Outer Rocker Panel

Commonly referred to as a slip on rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Made in the USA. Note: Shipped oversize.

Product#: TF400369

1955 Chevrolet 2 Door LH Replacement Outer Rocker Panel

Commonly referred to as a "slip on" rocker panel. Does not go to factory seams but is very effective in replacing commonly rusted out areas. Goes over your existing outer rocker panel. Cosmetic Replacement. Note: Smooth...

Product#: KW538

1955-72 Buick, Chevrolet, Pontiac, Oldsmobile; Rear Rocker Drain Flaps; Pair; Various Models

Reproduction rear rocker panel flaps for various Buick, Chevrolet, Pontiac, and Oldsmobile models. Once installed, these flaps will help prevent road splash and debris from entering and blocking the rocker panel drain area....