Product#: BFP1700R

1961-64 Impala, Bel Air, Biscayne; Full Length Floor Pan; RH Passenger Side; EDP Coated

Reproduction of the original floor pan for use with 1961-64 Chevrolet Impala, Bel Air and Biscayne models. Each floor pan is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: BFP1700L

1961-64 Impala, Bel Air, Biscayne; Full Length Floor Pan; LH Drivers Side; EDP Coated

Reproduction of the original floor pan for use with 1961-64 Chevrolet Impala, Bel Air and Biscayne models. Each floor pan is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: M112

Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"

Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...

Product#: 4808179

1961-69 GM; Floor Pan Metal Plug; Oval; With Weld Holes; With Notches

Reproduction oval floor pan metal plug for various 1961-1969 GM models. This plug installs in the floor pan and trunk floor pan to seal factory oval access openings. Features the correct oval shape with notches and weld holes...

Product#: M111

Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"

Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...

Product#: TF400805

1955-57 Chevrolet Front Floorboard Set

This is a complete weld-in front floorboard exclusively for the custom firewall panel with a 4" setback. This is the front of the floor pan between the front seat and the toe board. Note: Not for use with stock firewall.

Product#: TF400489

1955-57 Chevrolet Bel Air, Wagon, Sedan; Full Length Floor Pan; Passenger Side; Made in the USA

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad sedan and station wagon models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400490

1955-57 Chevy Bel Air, 150, 210, Nomad; Full Length Floor Pan; Hardtop, Convertible; Drivers Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400489A

1955-57 Chevrolet Bel Air, Wagon, Sedan; Full Length Floor Pan; Passenger Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad sedan and station wagon models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400490A

1955-57 Chevy Bel Air, 150, 210, Nomad; Full Length Floor Pan; Hardtop, Convertible; Drivers Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400497

1955-57 Chevrolet Wagon Cargo Floor Pan

This rear cargo floor pan fits between the back seat and the tire well. Fits all 2/4 door wagons, Nomad and sedan delivery models. Made in USA. Note: Shipped double oversize.

Product#: TF400501

1955-57 Chevrolet Convertible RH Rear Floor Pan

Reproduction right hand rear floor pan for all 1955-57 Chevrolet convertible models. Manufactured to original specifications, each pan features correct gauge metal and correct contours. Made in USA. No te: Shipped oversize.

Product#: TF400500

1955-57 Chevrolet Convertible LH Rear Floor Pan

Reproduction left hand rear floor pan for all 1955-57 Chevrolet convertible models. Manufactured to original specifications, each pan features correct gauge metal and correct contours. Made in USA. Not e: Shipped oversize.

Product#: TF400482

1955-57 Chevrolet LH Front Floor Pan

Replace the rusted out left hand front floor pan on your 1955-57 Chevrolet with this heavy gauge die-stamped pan. Feature correct contours and correct drain plug locations. Made in USA. Note: Shipped oversize. Measurements:...

Product#: TF400483

1955-57 Chevrolet RH Front Floor Pan

Replace the rusted out right hand front floor pan on your 1955-57 Chevrolet with this heavy gauge die-stamped pan. Feature correct contours and correct drain plug locations. Made in USA. Note: S hipped oversize. Measurements:...

Product#: BFP3481

1961-64 Chevrolet Impala/Full Size; Rear Floor Pan Section; LH Driver Side

Replace your damaged or rusted out rear floor pan section with this Classic Industries®high quality reproduction! Each partial floor pan is manufactured to exact specifications offering extremely detailed originality and...

Product#: BFP3482

1961-64 Chevrolet Impala/Full Size; Rear Floor Pan Section; RH Passenger Side

Replace your damaged or rusted out rear floor pan section with this Classic Industries® high quality reproduction! Each partial floor pan is manufactured to exact specifications offering extremely detailed originality and...

Product#: TF400492

1955-57 Chevrolet LH Toe Board Panel

The front floor to firewall area is a commonly rusted area. This reproduction left hand toe board panel will repair the problem. Features correct gauge steel and contours. Fits all 1955-57 Chevrolet models. Made in USA.

Product#: TF400502

1955-57 Chevrolet 2 And 4 Door (Except Wagon) LH Under Rear Seat Floor Pan

Reproduction left hand under rear seat floor pan for all 1955-57 Chevrolet models. This piece repairs the rusted floor area underneath the rear seat. Measurement: 30 1/2" long x  21 1/2" wide  x  1 1/2" high...

Product#: CRH161

1959-1960 Chevrolet Impala,. Bel Air, Biscayne; Toe Kick Panel; Stamped Steel

Easily repair the rusted or damaged toe kick panel in your 1959-60 Chevrolet Impala, Bel Air, Biscayne, and full size model as listed below with this original reproduction unit. Each toe kick panel is manufactured from 19...

Product#: TF400806

1955-57 Nomad, Station Wagon; Rear Floorboards; Pair

Aftermarket style weld-in rear floorboards designed for use with 1955-57 Nomad and 1955-57 Bel Air, 150, 210 station wagon models. This rear floor board will cover the back of the rear seat to the tail gate. Manufactured from...

Product#: TF400488

1955-57 Chevrolet Bel Air, Wagon, Sedan; Full Length Floor Pan; Drivers Side; Made in the USA

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad sedan and station wagon models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400491

1955-57 Chevy Bel Air, 150, 210, Nomad; Full Length Floor Pan; Hardtop, Conv; RH; Made in the USA

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. Each floor pan is manufactured in stamped steel to original factory...

Product#: 24123

1959-60 Impala; Bel Air; Biscayne; Under Rear Seat Floor Pan

Reproduction under rear seat floor pan designed for 1959-60 Chevrolet Impala, Bel Air and Biscayne models. Manufactured in stamped steel to factory specifications featuring correct contours for an authentic appearance and...

Product#: TF400488A

1955-57 Chevrolet Bel Air, Wagon, Sedan; Full Length Floor Pan; Drivers Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad sedan and station wagon models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400491A

1955-57 Chevy Bel Air, 150, 210, Nomad; Full Length Floor Pan; Hardtop, Convertible; Passenger Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400804

1955-57 Chevrolet Toeboard/Tunnel Extnsion Set

This is a weld-in toe board and transmission tunnel extension exclusively for the custom firewall panel with a 4" setback. This is the very front of the floor pan where it meets the fir ewall and includes the forward section...

Product#: TF400807

1955-57 Chevrolet Transmission Cover

This is a complete weld-in rear transmission cover for all 1955-57 models.

Product#: TF400498

1955-57 Chevrolet (Except Convertible) LH Rear Floor Pan

Reproduction left hand rear floor pan for all 1955-57 Chevrolet models except convertible. Manufactured to original specifications, each pan features correct gauge metal and correct contours. Made in USA. Note: Shipped...

Product#: TF400499

1955-57 Chevrolet (Except Convertible) RH Rear Floor Pan

Reproduction right hand rear floor pan for all 1955-57 Chevrolet models except convertible. Manufactured to original specifications, each pan features correct gauge metal and correct contours. Made in USA. Note: Shipped...

Product#: TF400493

1955-57 Chevrolet RH Toe Board Panel

The front floor to firewall area is a commonly rusted area. This reproduction right hand toe board panel will repair the problem. Features correct gauge steel and contours. Fits all 1955-57 Chevrolet models. Made in USA.

Product#: TF400503

1955-57 Chevrolet 2 And 4 Door (Except Wagon) RH Under Rear Seat Floor Pan

Reproduction right hand under rear seat floor pan for all 1955-57 Chevrolet models. This piece repairs the rusted floor area underneath the rear seat. Measurement: 30 1/2" long x  21 1/2" wide  x  1 1/2" high...

Product#: TF400495

1955-57 Chevrolet LH Under Front Seat Floor Pan

Reproduction left hand under seat floor pan for all 1955-57 Chevrolet models. This pan replaces the rusted floor area underneath the front seat. Made in USA. Note: Shipped oversize.

Product#: TF400496

1955-57 Chevrolet RH Under Front Seat Floor Pan

Reproduction right hand under seat floor pan for all 1955-57 Chevrolet models. This pan replaces the rusted floor area underneath the front seat. Made in USA. Note: Shipped oversize.

Product#: CRH188

1961-1964 Chevrolet Biscayne RH Rear Floor Pan

Exact replacement front LH floor pan for use with 1961-1964 Chevy Biscayne models. Manufactured to original specifications and made from high quality stamped steel. Note:Sold individually. Shipped oversize. Applications...

Product#: CRH174

1961-1964 Chevrolet Biscayne RH Front Floor Pan

Repair the rusted or damaged front RH floor pan of your 1961-64 Chevrolet Biscayne with this new reproduction part. Minimal installation time. Made from stamped steel. Applications 1961-1964 Chevrolet Biscayne 1961 Chevrolet...

Product#: 1667195

1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...

Product#: 1667194

1961-73 GM; Floor Pan Metal Plug; Oval; With Weld Hole; Without Notches

Reproduction oval metal floor pan and trunk pan plug used by General Motors on various 1961-73 models. Located on both the front and rear floor pans and the trunk floor pan, this plug is manufactured using heavy gauge steel...

Product#: 84L017

Ford, Lincoln, Mercury; Floor Pan Metal Plug; Each; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Can be used as a...

Product#: 69510000

Universal Fit Tunnel Patch Kit; For Large Transmissions Including Tremec Magnum 6-speed Conversion; Hurst 69510000

The Hurst Universal tunnel patch is large enough for installing a most transmissions, including a Tremec Magnum 6-speed transmission in just about any vehicle. The universal tunnel patch is constructed from 20-gauge cold...

Product#: 69510003

Universal Fit Tunnel Patch Kit; For GM Vehicles; Tremec TKO 5-speed Conversion; Hurst 69510003

This Hurst Universal tunnel patch is intended for fabricating a new tunnel when installing a Tremec TKO 5-speed transmission in most GM vehicles. The tunnel patch is constructed from 20-gauge cold rolled steel and is...