Product#: TF400486

1955-57 Bel Air, 150, 210; Complete Floor Pan & Trunk Pan; with Braces; 2 & 4 Door Sedan; Weld-Thru

Reproduction of the original complete floor pan and trunk pan assembly designed for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Del Ray models with 2 or 4 door sedan. Each floor pan is...

Product#: 14746W

1965-70 Impala, Bel Air, Caprice; Full Floor Pan Assembly; with Bracing; Silver Weld Thru Coating; One-Piece

Reproduction floor pan assembly for 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. This complete floor pan is manufactured in quality stamped steel to factory dimensions and replicates the original floor pan...

Product#: 14746A

1965-70 Impala, Bel Air, Biscayne, Caprice; Full Floor Pan Assembly; with Bracing; EDP Coating

Reproduction complete floor pan for 1965-1970 Chevrolet Impala, Bel Air, Biscayne and Caprice models. This complete floor pan is manufactured in stamped steel to OE factory specifications replicating the design and fitment...

Product#: TF400481A

1955-57 Bel Air, 150, 210. Nomad; Complete Floor Pan; 2 & 4 Door, Sedan, Station Wagon; with Braces; EDP Coated

Reproduction of the original complete floor pan designed for use with 1955-57 Chevrolet passenger cars with 2 or 4 door, sedan and station wagon models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400480A

1955-57 Chevrolet Bel Air; Complete Floor Pan; Convertible; with Braces; EDP Coated

Reproduction of the original complete floor pan designed for use with 1955-57 Chevrolet Bel Air convertible models. Each floor pan is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: BFP1700R

1961-64 Impala, Bel Air, Biscayne; Full Length Floor Pan; RH Passenger Side; EDP Coated

Reproduction of the original floor pan for use with 1961-64 Chevrolet Impala, Bel Air and Biscayne models. Each floor pan is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: BFP1700L

1961-64 Impala, Bel Air, Biscayne; Full Length Floor Pan; LH Drivers Side; EDP Coated

Reproduction of the original floor pan for use with 1961-64 Chevrolet Impala, Bel Air and Biscayne models. Each floor pan is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: TF400527

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Front Floor Brace; Long; except Convertible & 4 Door Hardtop Models

Reproduction long front floor brace for all 1955-57 Chevrolet models except convertible and 4-door hardtop. This brace welds across the underside of the center floor pan. Features and Benefits: Stamped steel construction...

Product#: B6841

1961-64 Impala, Bel Air, Biscayne; Under Rear Seat Brace; RH or LH; Each

Reproduction of the original under rear seat brace designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each brace is manufactured in quality stamped steel to the OE configuration replicating the...

Product#: B11015A

1965-70 Impala, Bel Air, Biscayne, Caprice; Center Floor Pan Support Brace; EDP Coated

Reproduction of the original center floor pan support brace for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each brace is manufactured in stamped steel to original factory specifications...

Product#: TF400526

1955-57 Chevrolet Bel Air, 150, 210; Short Floor Pan Center Brace; RH or LH; Each

Reproduction of the original short floor center brace designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. This support welds to the underside of the front floor, forward of the under seat braces. Each...

Product#: TF400519

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Front Floor Brace at Cowl; LH Drivers Side

Reproduction of the original front floor brace at the cowl. Fits all 1955-57 Chevrolet models. Each front floor brace is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: TF400899

1955-57 Chevy Bel Air, 150, 210; Floor Wiring Covers; 4 Door Hardtop; Front and Rear

Reproduction of the original style floor wiring covers for use with various 1955-57 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series 4 door hardtop models. Each cover is manufactured to original factory specifications...

Product#: TF400535

1955-57 Chevrolet Bel Air, 150, 210; Rear Seat Floor Brace; Reinforcement Plate; LH Driver Side

Reproduction rear seat floor brace for all 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: TF400532

1955-57 Chevrolet RH Under Seat Brace

Reproduction of the original under seat brace for all 1955-57 Bel Air, 150, 210, and Nomad models. This brace welds to the underside of the floor on the driver side between the short floor brace and the long front floor...

Product#: TF400900

1955-57 Chevy Bel Air, 150, 210; Rear Floor Wiring Covers; 2 Door Sedan; Pair

Reproduction of the original rear floor wiring covers for use with 1955-57 Bel Air, One-Fifty Series, and Two-Ten Series 2 door sedan models. Fits on top of the floor under the rear quarter window area to cover the wiring...

Product#: TF400861

1955-57 Chevrolet Bel Air Convertible; Seat Riser to B-Pillar Support Bracket; RH Passenger Side

This reproduction support brace reinforces the connection between the B-pillar support brace and the rear seat riser on the right side (passenger side). Used on 1955-1957 Chevrolet Bel Air convertibles only. Features and...

Product#: GN110281

1974-92 Buick, Chevrolet, Pontiac, Oldsmobile; Front Floor Pan Plug; 3-3/4" x 3-1/2"; Various Models

Reproduction original style floor pan plug designed for use on various 1974-92 GM models. Each floor pan plug is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: M112

Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"

Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...

Product#: *84L020

Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....

Product#: 4808179

1961-69 GM; Floor Pan Metal Plug; Oval; With Weld Holes; With Notches

Reproduction oval floor pan metal plug for various 1961-1969 GM models. This plug installs in the floor pan and trunk floor pan to seal factory oval access openings. Features the correct oval shape with notches and weld holes...

Product#: TF400487

1955-57 Chevy Bel Air; Complete Floor Pan & Trunk Pan; with Braces; 2 door Hardtop; Silver Weld Thru

Reproduction complete floor pan and trunk pan assembly for 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Del Ray models with 2 door hardtop. Each floor pan is manufactured in quality stamped steel to...

Product#: 153787

1961-64 Impala, Bel Air, Biscayne; 2 Door; Complete Floor Pan Assembly; with Braces; 1 Piece Design

Reproduction floor pan assembly that is stamped using OE specifications for an authentic replacement of any 1961-64 Impala or Full Size Chevrolet model. This reproduction is just what you'll need if your original complete...

Product#: TF400479A

1955-57 Chevy Bel Air; Complete Floor Pan; with Floor Braces; 2 Door Hardtop; EDP Coated

Reproduction of the original complete floor pan assembly designed for use with 1955-57 Chevrolet Bel Air 2 door hardtop models. Each floor pan is manufactured in quality stamped steel to factory specifications replicating the...

Product#: B12020

1961-64 Impala, Bel Air, Biscayne; Complete Floor Pan; w/o Bracing; 2 Door; EDP Coated

Reproduction floor pan assembly that is stamped using OE specifications for an authentic replacement of any 1961-64 Impala or Full Size Chevrolet 2 door models. This reproduction is just what you'll need if your original...

Product#: TF400528

1955-57 Chevrolet Bel Air; Long Front Floor Brace; Convertible

Reproduction of the original style long center floor brace unit designed for use with all 1955-57 Chevrolet Bel Air convertible models. This support welds across the underside of the floor between the trunk floor and the...

Product#: TF401569

1955-57 Chevrolet Bel Air, 210; Rear Floor to B-Pillar Brace; 4 Door, Hardtop; LH Driver Side

Reproduction B-pillar brace reinforces the connection between the B-pillar and floor on the left side (driver side). Used on 1955-1957 Chevrolet Bel Air and 210 4-door hardtop models. Features and Benefits: Authentic...

Product#: TF401570

1955-57 Chevrolet Bel Air, 210; Rear Floor to B-Pillar Brace; 4 Door, Hardtop; RH Passenger Side

Reproduction B-pillar brace reinforces the connection between the B-pillar and floor on the left side (driver side). Used on 1955-1957 Chevrolet Bel Air and 210 4-door hardtop models. Features and Benefits: Authentic...

Product#: TF400523

1955-57 Chevrolet Bel Air, 150, 210; Center Floor Brace; Long

Reproduction of the original style long center floor brace unit designed for use with all 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. This support welds across the underside of the floor between the trunk floor and...

Product#: TF400538

1955 Chevrolet All Models - 1956-57 Convertible Models RH Cowl To Floor Pan Brace

This reproduction right hand cowl to floor brace connects the inner dash kick panel area down to the front corner of the driver side floor pan. Made in the USA. Applications: 1955: All Models 1956-57: Convertible Only

Product#: TF400537

1955 Chevrolet 150, 210, Bel Air All; 1956-57 Bel Air Convertible; Kick Panel Brace; Cowl To Floor Pan; LH

This reproduction left hand cowl to floor brace connects the inner dash kick panel area down to the front corner of the driver side floor pan. Produced in stamped steel. Also known as a kick panel brace. Applications: 1955...

Product#: B11014A

1965-70 Impala, Bel Air, Biscayne, Caprice; Front Floor Pan Support Brace; EDP Coated

Reproduction of the original front floor pan support brace used on 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each brace is manufactured in stamped steel to original factory specifications featuring...

Product#: B11016A

1965-70 Impala, Bel Air, Biscayne, Caprice; Rear Floor Pan Support Brace; EDP Coated

Reproduction of the original center floor pan support brace for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each brace is manufactured in stamped steel to original factory specifications,...

Product#: TF400520

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Front Floor at Cowl Brace; RH Passenger Side

Reproduction of the original front floor brace at the cowl. Fits all 1955-57 Chevrolet models. Each front floor brace is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: TF400898

1955-57 Chevy Bel Air, 150, 210; Floor Wiring Covers; 4 Door Sedan / Station Wagon

Reproduction of the original style floor wiring covers for use with various 1955-57 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each cover is manufactured to original factory specifications offering a...

Product#: M111

Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"

Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...

Product#: M1783A

1965-70 Impala, Bel Air, Biscayne, Caprice; Under Floor Pan Side Support; LH Drivers Side

Reproduction of the original under floor pan side support designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each support is manufactured in stamped steel to original factory specifications...

Product#: M1782A

1965-70 Impala, Bel Air, Biscayne, Caprice; Under Floor Pan Side Support; RH Passenger Side

Reproduction of the original under floor pan side support designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each support is manufactured in stamped steel to original factory specifications...

Product#: TF400536

1955-57 Chevrolet Bel Air, 150, 210; Rear Seat Floor Brace; Reinforcement Plate; RH Passenger Side

Reproduction rear seat floor brace for all 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: TF400521

1955-57 Chevrolet Bel Air, 150, 210; Rear Short Floor Brace; Hardtop, Convertible; LH Drivers Side

Reproduction of the original rear short floor brace designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. This support welds to the underside of the floor on the driver side...

Product#: TF400531

1955-57 Chevrolet Bel Air, 150, 210; Under Seat Brace; LH

Reproduction of the original under seat brace for all 1955-57 Bel Air, 150, 210, and Nomad models. This brace welds to the underside of the floor on the driver side between the short floor brace and the long front floor...

Product#: TF400522

1955-57 Chevrolet Bel Air, 150, 210; Rear Short Floor Brace; Hardtop, Convertible; RH Passenger Side

Reproduction of the original rear short floor brace designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. This support welds to the underside of the floor on the passenger side...

Product#: TF500295

1955-57 Chevrolet Full Size; Rear End Snubber Bracket; With Rubber Bumper

1955-57 Chevrolet full size models rear end snubber bracket. This bracket welds to the underside of the floor right above the differential to act as a "bump stop" to keep the differential from hitting the underside of the...

Product#: TF401571

1955-57 Chevrolet Full Size; Rear Seat Floor Pockets; pr

Reproduction rear seat pickets for 1956-57 4-Door Hardtop & 1955-57 Sedans. These install into the rear floor underseat pan to retain the seat bottom. {fitment}

Product#: TF400860

1955-57 Chevrolet Bel Air Convertible; Seat Riser to B-Pillar Support Bracket; LH Driver Side

This reproduction support brace reinforces the connection between the B-pillar support brace and the rear seat riser on the left side (driver side). Used on 1955-1957 Chevrolet Bel Air convertibles only. Features and...

Product#: TF401061

1955-57 Chevy Bel Air, 150, 210, Nomad; Long Front Floor Brace; 4 Door; Hardtop

Reproduction long front floor brace for all 1955-57 four door hardtop models. This brace welds across the underside of the center floor pan.

Product#: TF400805

1955-57 Chevrolet Front Floorboard Set

This is a complete weld-in front floorboard exclusively for the custom firewall panel with a 4" setback. This is the front of the floor pan between the front seat and the toe board. Note: Not for use with stock firewall.

Product#: TF400489

1955-57 Chevrolet Bel Air, Wagon, Sedan; Full Length Floor Pan; Passenger Side; Made in the USA

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad sedan and station wagon models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400490

1955-57 Chevy Bel Air, 150, 210, Nomad; Full Length Floor Pan; Hardtop, Convertible; Drivers Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400489A

1955-57 Chevrolet Bel Air, Wagon, Sedan; Full Length Floor Pan; Passenger Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad sedan and station wagon models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400490A

1955-57 Chevy Bel Air, 150, 210, Nomad; Full Length Floor Pan; Hardtop, Convertible; Drivers Side

Reproduction of the original style full length floor pan designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. Each floor pan is manufactured in stamped steel to original factory...

Product#: TF400497

1955-57 Chevrolet Wagon Cargo Floor Pan

This rear cargo floor pan fits between the back seat and the tire well. Fits all 2/4 door wagons, Nomad and sedan delivery models. Made in USA. Note: Shipped double oversize.

Product#: TF400501

1955-57 Chevrolet Convertible RH Rear Floor Pan

Reproduction right hand rear floor pan for all 1955-57 Chevrolet convertible models. Manufactured to original specifications, each pan features correct gauge metal and correct contours. Made in USA. No te: Shipped oversize.

Product#: TF400500

1955-57 Chevrolet Convertible LH Rear Floor Pan

Reproduction left hand rear floor pan for all 1955-57 Chevrolet convertible models. Manufactured to original specifications, each pan features correct gauge metal and correct contours. Made in USA. Not e: Shipped oversize.

Product#: TF400482

1955-57 Chevrolet LH Front Floor Pan

Replace the rusted out left hand front floor pan on your 1955-57 Chevrolet with this heavy gauge die-stamped pan. Feature correct contours and correct drain plug locations. Made in USA. Note: Shipped oversize. Measurements:...

Product#: TF400483

1955-57 Chevrolet RH Front Floor Pan

Replace the rusted out right hand front floor pan on your 1955-57 Chevrolet with this heavy gauge die-stamped pan. Feature correct contours and correct drain plug locations. Made in USA. Note: S hipped oversize. Measurements:...

Product#: BFP3481

1961-64 Chevrolet Impala/Full Size; Rear Floor Pan Section; LH Driver Side

Replace your damaged or rusted out rear floor pan section with this Classic Industries®high quality reproduction! Each partial floor pan is manufactured to exact specifications offering extremely detailed originality and...

Product#: BFP3482

1961-64 Chevrolet Impala/Full Size; Rear Floor Pan Section; RH Passenger Side

Replace your damaged or rusted out rear floor pan section with this Classic Industries® high quality reproduction! Each partial floor pan is manufactured to exact specifications offering extremely detailed originality and...

Product#: TF400492

1955-57 Chevrolet LH Toe Board Panel

The front floor to firewall area is a commonly rusted area. This reproduction left hand toe board panel will repair the problem. Features correct gauge steel and contours. Fits all 1955-57 Chevrolet models. Made in USA.

Product#: TF400525

1955-57 Chevrolet Bel Air, 150, 210; Long Center Brace Repair End; RH, Passenger Side

This brace segment replaces the damaged or rusted end of the long center floor brace. Measures approximately 16" in length and installs on the RH, passenger side. Made in USA. {fitment}