Product#: 9785616

1955-82 Spare Tire Hold Down Nut; 5/16"-18 Thread; 3.88" Wide; Zinc Finish

OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....

Product#: 4753019

1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models

This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...

Product#: 152600A

1962-64 Impala, Full Size Hardtop, Sedan; Trunk Lid Hinges; LH & RH; EDP Finish

Reproduction trunk lid hinges for 1962-64 Chevrolet Impala, Bel Air, and Biscayne hardtop and sedan models. These hinges are manufactured in quality stamped steel to factory specifications and feature correct torque rod...

Product#: TF218835

1955-57 Bel Air, Two-Ten; 2 or 4 Door Hardtop, Sedan; Molded Trunk Area Carpet w/o Spare Tire Cutout; Mass Backing; Cutpile; Tan

Molded trunk carpet kit without spare tire cutout and with mass backing designed for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series 2 or 4 door models. When it comes to quality,OER® is the most...

Product#: TF400184

1955-57 Chevy Bel Air, 150, 210; Rubber Trunk Mat; Hardtop, Sedan

Reproduction rubber trunk mat for 1955-57 Chevrolet Bel Air, 150, 210 hardtop and sedan models. Each trunk mat is manufactured in quality rubber molded to the floor pan for an authentic fit and appearance. Features a pre-cut...

Product#: TF400185

1955-57 Chevy Bel Air; Rubber Trunk Mat; Convertible

Reproduction rubber trunk mat for 1955-57 Chevrolet Bel Air convertible models. Each trunk mat is manufactured in quality rubber molded to the floor pan for an authentic fit and appearance. Features a pre-cut spare tire cut...

Product#: TF400713

1955-57 Chevrolet Bel Air, 150, 210; Trunk Spare Tire Well; EDP Coated

Reproduction of the original spare tire well designed for use with 1955-57 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Del Ray models except wagon, delivery and utility vehicles. Each trunk spare well cover is...

Product#: 5717538

1961-64 Chevrolet; 1963-64 Oldsmobile; 1963-65 Buick; Full Size; Trunk Lid Hinges; Hardtop, Sedan Models; RH and LH; Pair

Reproduction of the original rear trunk lid hinges for use with 1961-64 Chevrolet, 1963-64 Oldsmobile and 63-65 Buick full size hardtop and sedan models (will not fit convertible models). The trunk lid hinges are manufactured...

Product#: 20066400

1965-74 Spare Tire Hold Down Rod Anchor Plate - Various GM Models

Be sure to protect your spare tire from unnecessary movement by making sure the spare tire anchor plate is correctly mounted. Acts as a clamp by holding the spare tire hold down rod in place after the nut is tightened....

Product#: TF400186

1955-57 Chevy Bel Air, 150, 210; Rubber Trunk Mat; Without Spare Tire Cut Out

Reproduction rubber trunk mat for 1955-57 Chevrolet Bel Air hardtop and sedan models. Each trunk mat is manufactured in quality rubber molded to the floor pan for an authentic fit and appearance. The rear passenger side area...

Product#: 20291279

1971-81 Buick, Chevy, Pontiac, Olds;,Rear Trunk Latch Lock Assembly; Various GM Models

Reproduction of the original trunk latch assembly designed for use on various GM models including 1971-81 Camaro and Firebird. This reproduction features a black electrophoretically deposited coating (EDP, or E-coat) for...

Product#: TF400756

1955-57 Chevrolet Bel Air, 150, 210; Trunk Floor Bumper Jack Storage Set; 3 Piece Set

Reproduction bumper jack storage mounts designed for use with 1955-57 Chevrolet full size models. These hard-to-find parts secure the bumper jack properly in the trunk, keeping it stable and in the correct factory location....

Product#: 9781957

1968-81 GM; Trunk Storage Sleeve, Wheel Jack and Wrench, 16-3/4" x 2-3/4", Large

Correct OER reproduction storage sleeve for the wheel jack and wrench. Found on many GM car models. Manufactured from rubber, this sleeve slides over the jack in the trunk and then secures the wheel lug nut wrench. Measures...

Product#: TF401401

1955-57 Bel Air, 210, 150, 1958-61 Impala, Bel Air, Biscayne; Trunk Lid To Hinge Bolt and Washer Set; 12 Piece

Reproduction trunk lid mounting bolt set for various 1955-61 Chevrolet full size passenger car models. This high quality bolt set features the correct size original style fasteners with a silver zinc finish. Rest assured you...

Product#: TF118747

1955-57 Bel Air, Two-Ten; 2 or 4 Door Hardtop, Sedan; Cut & Sewn Trunk Area Carpet w/ Spare Tire Cutout; Cutpile; Dark Gray

Product#: BT4007B

1955-57 Chevrolet Sedan; Billet Aluminum Trunk Hinges; Raw Machined Finish

Billet aluminum trunk hinges for 1955-57 Bel Air sedan models. These precision machined hinges do not include a gas strut.,Raw machined finish.{fitment}"

Product#: TF400389

1955-57 Chevrolet Bel Air, 150, 210; Trunk Lid Hinges; Sedan; EDP Coated

Reproduction of the original trunk lid hinges designed for use with 1955-57 Chevrolet Bel Air, 150, 210 sedan models. Each hinge is manufactured in quality stamped steel replicating the original GM hinge in design and...

Product#: TF400696

1955-57 Bel Air Convertible Trunk Lid Hinges

Reproduction trunk lid hinge assemblies for 1955-57 Bel Air convertible models. These hinge assemblies are manufactured to original specifications and are finished in a rust preventive coating*.

Product#: 581730

1958 Impala; Bel Air, Biscayne; Rubber Trunk Mat; Original Style; Black; Fits Hardtop, Sedan and Convertible Models

Reproduction of the original black rubber trunk mat designed for 1958 Chevrolet Impala, Bel Air and Biscayne hardtop, sedan and convertible models. Each trunk mat is manufactured in high quality rubber and molded to the trunk...

Product#: K79000A

1955-81 Jack Storage Bag; Houndstooth; Gray / Black

Handy jack and load rest bracket storage bag with snap lock designed for use with various 1955-81 GM models. Each jack storage bag is produced with reproduction gray and black Houndstooth felt backed material. Fits original...

Product#: CM53111

1955-57 Chevrolet Trunk Panel Set

This trunk panel set is the perfect way to beautify your trunk area. There's no need to spend big bucks having it professionally paneled when this pre-cut set fits in place exactly. Panels can be covered with vinyl, cloth or...

Product#: K79000B

1955-81 Jack Storage Bag; Houndstooth; Aqua / Black

Handy jack and load rest bracket storage bag with snap lock designed for use with various 1955-81 GM models. Each jack storage bag is produced with reproduction aqua and black Houndstooth felt backed material. Fits original...

Product#: K78000A

1967-69 Camaro, Firebird; Standard Spare Tire Cover; Houndstooth; Gray & White; with 14" or 15" Spare; Slip-On Design

This spare tire cover can be used for any 14" or 15" spare on 1962-81 Camaro, Firebird, or any other GM vehicle with a standard spare tire. Will look great when adding a trunk mat in the same Houndstooth design. a The spare...

Product#: 1400001

1967-69 Camaro/Firebird; 1959-72 Impala; 1962-74 Nova; 1964-72 Chevelle; and Other GM; Remote Power Trunk Release System

The Klassic Keyless system is a complete do-it-yourself kit designed specifically to fit your vehicle. In this power trunk release kit you will receive: 1 power trunk latch, 1 manual push button, wire and wire loom, full...

Product#: AS576

1957 Chevrolet Sedan acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: AS575

1956 Chevrolet Sedan acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: AS567

1956 Chevrolet Convertible acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: AS566

1955 Chevrolet Convertible acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: TF400795

1955-57 Trunk Latch Assembly

Reproduction of the trunk latch for all 1955-57 models except wagons. Assembly includes 3 pieces, the latch, latch cover and lower striker plate. No hardware included.

Product#: TF400792

1955-57 Chevrolet Spare Tire Well Delete Panel

Add a great upgrade to your Classic Chevy with a spare tire well delete panel. Manufactured from quality 16 gauge steel, this will eliminate the spare tire well to allow clearance for spring pockets, exhaust systems, fuel...

Product#: K78008B

1962-79 Nova, Camaro, Firebird, Impala; Spare Tire Cover; w/Fiberboard; 15"; Black/Aqua Houndstooth

Reproduction of the original style spare tire cover for use with various 1962-79 GM models with a 15" spare tire as listed below. This cover is manufactured in quality black and aquaHoundstooth pattern. Each cover includes a...

Product#: K78008A

1962-79 Nova, Camaro, Firebird, Impala; Spare Tire Cover; w/Fiberboard; 15"; Gray/Black Houndstooth

Reproduction of the original style spare tire cover designed for use with various 1962-79 GM models with a 15" spare tire. Each cover is manufactured in correct gray and black Houndstooth pattern commonly used on many GM...

Product#: K78007A

1962-79 Nova, Camaro, Firebird, Impala; Spare Tire Cover; w/Fiberboard; 14"; Houndstooth; Gray & White

Reproduction of the original style spare tire cover for use with various 1962-79 GM models with a 14" spare tire as listed below. This cover is manufactured in quality gray and white Houndstooth pattern. Each cover includes a...

Product#: K79000K

1955-70 GM; Jack Storage Bag; Crowsfoot Jack Storage Bag; Gray & Black

Handy jack and load rest bracket storage bag with snap lock designed for use with various 1955-81 GM models. Each jack storage bag is produced with reproduction gray and black Crowsfoot felt backed material. Fits original...

Product#: TF401259

1955-57 Chevrolet Full Size Trunk Corner Patch Panel; Inner; RH

This inner trunk wall patch panel installs in the rear corner of the trunk wall behind where the tail lamp installs. These corner patch panels are the perfect way to add strength to your ofter rusted existing inner trunk...

Product#: Y18027P

1965 Impala; Bel Air; Biscayne; Caprice; 2/4-Door Hardtop, Sedan or Convertible; Trunk Lock Cylinder Retainer Clip

Reproduction trunk lock cylinder retainer clip for 1965 Impala, Bel Air or Biscayne 2/4-Door Hardtop, Sedan or convertible models. Manufactured from high quality steel to factory specifications offering the correct fit,...

Product#: L18074P

1963 Impala; Bel Air; Biscayne; 2/4-Door Hardtop, Sedan or Convertible; Trunk Lock Retainer Clip

Reproduction trunk lock cylinder retainer clip for 1963 Impala, Bel Air or Biscayne 2/4-Door Hardtop, Sedan or convertible models. Manufactured from high quality steel to factory specifications offering the correct fit,...

Product#: Y18060P

1969-70 Impala; Bel Air; Biscayne; Caprice; 2/4-Door Hardtop, Sedan or Convertible; Trunk Lock Cylinder Retainer Clip

Reproduction trunk lock cylinder retainer clip for 1969-70 Impala, Caprice, Bel Air or Biscayne 2-4-Door Hardtop, Sedan or convertible models. Manufactured from high quality steel to factory specifications offering the...

Product#: L18085P

1960 Impala; Bel Air; Biscayne; 2/4-Door Hardtop, Sedan or Convertible; Trunk Lock Cylinder Retainer Clip

Reproduction trunk lock cylinder retainer clip for 1960 Impala, Bel Air or Biscayne 2-4-Door Hardtop, Sedan or convertible models. Manufactured from high quality steel to factory specifications offering the correct fit,...

Product#: TK112AR

1958 Full Size Chevrolet; 1963-58 Corvette Trunk Lock With Original Style Key

Replace your trunk lock cylinder with this correct replacement. Each cylinder includes 2 pre-cut keys, gasket, retainer and shaft for easy and fast installation.

Product#: TF901000

1955-57 Chevrolet Nomad, Bel Air, 150, 210 Station Wagon; Spare Tire Retainer Bracket Set; 5 Piece Set

Reproduction spare tire retainers for 1955-57 Chevrolet Nomad and Bel Air, 150, 210 station wagon models. Each set of retainers is manufactured from stamped steel to factory dimensions. Includes 5 brackets for an authentic...

Product#: TF400901

1955-57 Chevrolet Trunk Rod Insulator Rubber

Reproduction trunk rod insulator for all 1955-57 hardtop and sedan models. This piece slides over one of the trunk rods and keeps them from squeaking together. One required per vehicle.

Product#: TF400791

1955-57 Chevrolet Hardtop And Sedan Mini Tub Set

Add a great upgrade to your Classic Chevy with a mini-tub set. Manufactured with all steel construction and weld in design made specifically to fit the shape of the stock inner wheel well for ease of installation. The...

Product#: BT4007A

1955-57 Chevrolet Sedan; Billet Aluminum Trunk Hinges; Matte Black Fusioncoat Finish

Billet aluminum trunk hinges for 1955-57 Bel Air sedan models. These precision machined hinges do not include a gas strut.,Matte black Fusioncoat finish.{fitment}"

Product#: BT4006C

1955-57 Chevrolet Hardtop / Convertible; Billet Aluminum Trunk Hinges; Bright Polished Finish

Billet aluminum trunk hinges for 1955-57 Bel Air hardtop and convertible models. These precision machined hinges do not include a gas strut. Bright polished finish.{fitment}.

Product#: BT4007C

1955-57 Chevrolet Sedan; Billet Aluminum Trunk Hinges; Bright Polished Finish

Billet aluminum trunk hinges for 1955-57 Bel Air sedan models. These precision machined hinges do not include a gas strut. Bright polished finish.{fitment}.

Product#: BT4006A

1955-57 Chevrolet Hardtop / Convertible; Billet Aluminum Trunk Hinges; Matte Black Fusioncoat Finish

Billet aluminum trunk hinges for 1955-57 Bel Air hardtop and convertible models. These precision machined hinges do not include a gas strut.,Matte black Fusioncoat finish.{fitment}"

Product#: BT4006B

1955-57 Chevrolet Hardtop / Convertible; Billet Aluminum Trunk Hinges; Raw Machined Finish

Billet aluminum trunk hinges for 1955-57 Bel Air hardtop and convertible models. These precision machined hinges do not include a gas strut.,Raw machined finish.{fitment}"

Product#: TF400695

1955-57 Chevrolet Hardtop Trunk Lid Hinges

Reproduction trunk lid hinge assemblies for 1955-57 Chevrolet hardtop models. These hinge assemblies are manufactured to original specifications and are finished in a rust preventive coating.

Product#: TF400714

1955-57 Chevrolet Nomad, Station Wagon, Delivery, Utility; Spare Tire Well; Made in the USA

Reproduction of the original style spare tire well panel designed for use with 1955-57 Chevrolet station wagon, delivery, and utility models. Each spare tire panel is manufactured from correct gauge sheet metal. Features...

Product#: AS587

1955 Chevrolet Sedan Delivery acousti Shield Cargo Area Insulation Set

Cargo area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: TR1200

Lokar Trunk Release Cable Set Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: AS558

1955 Chevrolet Coupe / Hardtop acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: AS560

1957 Chevrolet Coupe / Hardtop acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: AS574

1955 Chevrolet Sedan acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: AS559

1956 Chevrolet Coupe / Hardtop acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: AS568

1957 Chevrolet Convertible acousti Shield Trunk Insulation Set

Trunk area insulation is designed to prevent road and exhaust noise from filtering into the passenger compartment through the rear of the vehicle. Designed with current "state-of-the-art" auto acoustic technology, to insulate...

Product#: TF400662

1955-57 Chevrolet Hardtop/Convertible Trunk Lid Torsion Rods

Reproduction trunk hinge torsion springs for 1955-57 Chevrolet hardtop and convertible models. These torque rods are essential for keeping pressure on the hinge assemblies which will help keep the trunk lid open.

Product#: TR1200B

Lokar Trunk Release Cable Set Black Stainless Steel

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. Made...

Product#: TM223

1962-64 Impala, Bel Air, Biscayne; Trunk Mat; Hardtop; Crowsfeet; Gray / Black; 3 Piece Set

Quality vinyl trunk mat with felt backing including correct cut-outs for a form-fitting installation. Each trunk mat is manufactured with quality automotive-grade vinyl featuring a Crowsfoot design pattern design that was...