Product#: 14914

1955-72 Buick, Chevy, Pontiac, Oldsmobile; Convertible Top Hose Retainer; Push In Style; Various Models

Reproduction of the original hose retainer clip designed for use with 1967-69 GM convertible models. Each clip is manufactured in stamped steel and heat treated for extra strength. This clip is designed to retain the...

Product#: ST016

1955-72 Buick, Chevy, Pontiac, Oldsmobile, Full Size; Convertible Top Hydraulic Pump Seal Set

Hydraulic pump seal set designed as a direct service replacement for use with various 1955-72 GM full size convertible models. This comprehensive set includes two large O-rings that seal each end of the reservoir (only one...

Product#: HK237

1955-62 Buick, Cadillac, Chevrolet, Pontiac, Oldsmobile Full Size; Convertible Top Motor And Pump Assembly; Various Models

Reproduction convertible top motor & pump assembly designed to provide consistent hydraulic pressure and long-term dependability. This unit allows you to raise and lower the power top with ease, replacing your old or worn out...

Product#: HK261

1959-60 Buick, Cadillac, Chevy, Pontiac, Oldsmobile Full Size; Convertible Top Cylinder; Each

Reproduction convertible top cylinder for 1959-1960 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size convertible models. Each cylinder is manufactured from a solid aluminum casting for superior strength compared...

Product#: TF400955

1955-57 Bel Air, Bonnevelle, Catalina, Star Chief; Convertible Top Cylinder; Each; Made in the USA!

Reproduction convertible top cylinder for 1955-57 Bel Air, Bonneville, Catalina, and Star Chief convertible models. All convertible top cylinders are not the same, and this version is manufactured from a solid aluminum...

Product#: HK222

1951-56 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Top Hydraulic Hose Set; Black Rubber; Pigtail Style

Reproduction of the original style hydraulic hose set designed to fit a wide variety of 1951-56 Buick, Chevrolet, Cadillac, Oldsmobile, and Pontiac convertible models as listed. Finding original style hose sets for your...

Product#: HK220

1955-61 Bel Air, Impala, Electra; Convertible Top Hydraulic Hose Set; Black Rubber; Various Models

Reproduction of the original style hydraulic hose set designed to fit a wide variety of 1955-61 Buick, Chevrolet, Cadillac, Oldsmobile, and Pontiac convertible models as listed. Original hose sets are nearly impossible to...

Product#: TF400226

1955-57 Chevrolet Convertible Top 302 Piece Hardware Set

Complete nut, bolt, bushing and screw set to assemble convertible top frame. Instructions are included. One set required.

Product#: TF401132

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel; Drivers Side

Reproduction left hand drain channel for 1955-57 convertible models. Manufactured to factory specifications for a proper fit and appearance. This piece is installed below the rear pinchwelt, behind the rear seat.

Product#: TF401148

1955-57 Chevy Bel Air; Convertible Top Cylinder Bracket; Passenger Side

Reproduction top cylinder mounting bracket for 1955-57 models. This is mounted to the floor pan, and acts as the mounting point for the lower portion of the top cylinder. Mounting hardware included.

Product#: BK001

1955-57 Chevy Bel Air; Convertible Top Hydraulic System Bleeder Set

After replacing your convertible top, pump and hoses, be sure the system operates properly by bleeding all the air out of the hydraulic system. This comes with a filler plug adaptor fitting and complete instructions. Works...

Product#: TF401134

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel Reinforcement; Drivers Side

Reproduction drain channel reinforcement for 1955-57 convertible models. This piece helps support the drain channels for proper drainage.

Product#: TF400222

1955-57 Convertible Top Hose Retainer Clip (Screw On Style)

Reproduction screw on style hose clip for 1955-57 convertible models.

Product#: TF401133

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel; Passenger Side

Reproduction right hand drain channel for 1955-57 convertible models. Manufactured to factory specifications for a proper fit and appearance. This piece is installed below the rear pinchwelt, behind the rear seat.

Product#: TF401147

1955-57 Chevy Bel Air; Convertible Top Cylinder Bracket; Drivers Side

Reproduction top cylinder mounting bracket for 1955-57 models. This is mounted to the floor pan, and acts as the mounting point for the lower portion of the top cylinder. Mounting hardware included.

Product#: TF401135

1955-57 Chevy Bel Air, 150, 210, Nomad; Convertible Drain Channel Reinforcement; Passenger Side

Reproduction drain channel reinforcement for 1955-57 convertible models. This piece helps support the drain channels for proper drainage.

Product#: TF400225

1955-57 Chevrolet Convertible Top Plates

Reproduction convertible top plates for 1955-57 models. Feature correct chrome plating and contours. Mounting screws are included.

Product#: CRP001

1955-57 Convertible Top 18 Piece Pinch Rail Pad Set

Replace your old, compressed and hardened originals, these pads will make your top replacement more complete and better fitting. Mounts in trunk between the rear pinch rail and the body.

Product#: UCR001

1955-64 Bel Air/Impala; Bolt Set; For Convertible Top Upper Cylinder Rod; 8-Piece Set

This is reproduction of the factory convertible top upper cylinder rod bolt set for 1955-57 Bel Air and 1958-64 Impala convertible models. Each 8-piece set includes (2) bolts, (2) nylon bushings, (2) wavy washers, and (2)...

Product#: 7614749

1949-75 GM, Dodge, Plymouth; Convertible Top Rear Window Binding End Clip, with Screw

OER reproduction of the original convertible top rear binding end clip used on most 1949-75 GM, Dodge, and Plymouth convertible models. This stainless steel end clip covers and finishes both ends of the rear window outer top...

Product#: 3698109

1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each

Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...

Product#: TF401190

1955-56 Chevy Bel Air; Convertible Top Switch Assembly

Reproduction convertible top switch assembly for 1955-56 Chevrolet Bel Air convertible models. Manufactured to factory specifications, featuring the original style black knob with white lettering. Includes: Mounting bracket,...

Product#: TF401191

1957 Chevy Bel Air; Convertible Top Switch Assembly

Reproduction convertible top switch assembly for 1957 convertible models. Manufactured to factory specifications, featuring the original style chrome knob with white lettering. Includes: Mounting bracket and retaining clips...

Product#: 4634122

1954-64 GM; 1-Button Switch; Windows or Convertible Top

Single button switch for right front and either side rear door/quarter panel power windows on 1954-57 Cadillac. Also used as convertible top switch on 1956 Oldsmobile, 1957-59 Cadillac and 1959-62 Pontiac and other GM models...

Product#: TF400786

1955-56 Chevrolet Bel Air; Convertible Switch Top Knob

Quality reproduction of the original convertible top switch designed for use with 1955-56 Chevrolet Bel Air convertible models. Each knob is manufactured to correct factory specifications offering an authentic appearance and...

Product#: TF401192

1955-57 Chevy-5 Convertible Top Switch Bracket

Reproduction convertible top switch bracket for 1955-57 convertible models. Manufactured to factory specifications, featuring correct size mounting studs and comes EDP coated for rust prevention.

Product#: TF400787

1957 Chevrolet Bel Air; Convertible Switch Top Knob

Quality reproduction of the original convertible top switch designed for use with 1957 Chevrolet Bel Air convertible models. Each knob is manufactured to correct factory specifications offering an authentic appearance and...

Product#: TF401193

1955-57 Chevy Bel Air; Convertible Top Switch Retaining Clip Set

Reproduction convertible top switch retaining clip set for 1955-57 convertible models. Manufactured to correctly replace missing or damaged original clips. One set required per vehicle.