Product#: 344330

1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated

Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...

Product#: TF400309

1957 Chevy Bel Air, 150, 210, Nomad; Front Bumper Bracket Set; with Hardware; 10 Piece set

Restore your classic Chevy's front-end integrity with this high-quality reproduction front bumper bracket set, designed for use on 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is meticulously crafted to...

Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...

Product#: TF401300

1956 Chevrolet Bel Air; 150; 210, Nomad; Front Bumper Guards; With Hardware; All Models; LH & RH; Pair

Reproduction front bumper guards for 1956 Chevrolet Bel Air, 150, and 210 models. Each bumper guard is manufactured in quality stamped steel to factory specifications and features correct contours and a bright chrome finish....

Product#: TF401105

1956 Chevrolet Bel Air, 150, 210; Rear Bumper Guards; with Hardware; Except Nomad & Wagon; LH & RH; Pair

Reproduction rear bumper guards designed for 1956 Chevrolet Bel Air, 150, and 210 models. Each bumper guard is manufactured in quality stamped steel to factory specifications and features correct contours and a bright chrome...

Product#: TF400891

1955 Chevrolet Bel Air, 150, 210; Rear Bumper Guards; Chrome; w/o Hardware; Except Wagon, Nomad; RH & LH; Pair

Reproduction rear bumper guard set for 1955 Chevrolet Bel Air, 150, and 210 models. Each bumper guard set is manufactured in steel to factory specifications featuring original contours and finished in a bright chrome plating....

Product#: TF400890

1955 Chevy Bel Air, 150, 210; Front Bumper Guards; with Hardware; Except Station Wagon, Nomad; RH & LH; Pair

Reproduction bumper guard set for 1955 Chevrolet Bel Air, 150, and 210 models. Each bumper guard set is manufactured to factory specifications in steel featuring original contours and finished in a bright chrome plating....

Product#: A3102

1938-91 GM; 1948-79 Ford; Bumper Bolt & Nut; Stainless Steel Capped; 1/2"-13 x 1-1/2"; Low Dome; Various Models

Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...

Product#: B1703

1962 Impala, Bel Air, Biscayne; Front Bumper Filler Panel

Reproduction front bumper filler for 1962 Impala, Biscayne and Bel Air models. This reproduction will replace the original bumper filler exactly. Manufactured to exact dimensions. {fitment} Note: Shipped double oversize.

Product#: A9400127

1962-77 Camaro, Nova, Impala, Chevelle; License Plate & Parking Light; Rubber Bumpers; 1/2" Tall; Set of 3; Various Models

Reproduction license plate rubber bumpers for various GM models including 1967-68 Camaro front or rear. Each bumper replicates the original in fit and appearance. Will replace the original worn out or missing original rubber...

Product#: B1700C

1964 Impala, Bel Air, Biscayne; Front Bumper Filler Panel; EDP Coated

Reproduction of the original front bumper filler panel for use with 1964 Chevrolet Impala, Biscayne, and Bel Air models. Each bumper filler is manufactured in stamped steel to original factory specifications featuring correct...

Product#: B1715

1966 Impala, Bel Air, Biscayne, Caprice; Front Bumper Guards; RH & LH; Pair

Reproduction of the original front bumper guards designed for use with 1966 Chevrolet Impala, Bel Air, Biscayne and Caprice models. Each bumper guard is manufactured to OE factory specifications offering an authentic...

Product#: 14222

1964 Impala, Bel Air, Biscayne; Front Bumper Reinforcement Bar; EDP Coated

Reproduction front bumper reinforcement bar for 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each bar is manufactured in quality stamped steel to original factory specifications featuring correct contours for a...

Product#: B1783

1964 Impala, Bel Air, Biscayne; Front Bumper Bracket Set; 3 Piece Set; RH Passenger Side

Correct reproduction front bumper bracket for 1964 Chevrolet Implala, Bel Air and Biscayne models. Each bracket is manufactured in stamped steel to the same configuration as the factory originals. Used to mount the RH...

Product#: 17758C

Bumper Bolt; with Nut; Zinc Plated; with Stainless Steel Cap; 7/16-14 X 1-1/4"; 8 Bolt Set with Nuts; Varius Models

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...

Product#: B1785

1964 Impala, Bel Air, Biscayne; Rear Bumper Bracket Set; 2 Piece Set; RH Passenger Side

Restore factory-correct fit and function with this accurate reproduction front bumper bracket, designed specifically for the passenger side (RH) of 1964 Chevrolet Impala, Bel Air, and Biscayne models. Expertly crafted from...

Product#: B1784

1964 Impala, Bel Air, Biscayne; Front Bumper Bracket Set; 3 Piece Set; LH Driver Side

Restore factory-correct fit and function with this accurate reproduction front bumper bracket, designed specifically for the driver side (LH) of 1964 Chevrolet Impala, Bel Air, and Biscayne models. Expertly crafted from...

Product#: TF400247

1956 Chevrolet Bel Air, 150, 210, Nomad; Center Front Bumper Bracket; LH Drivers Side

Reproduction of the original center front bumper to frame bracket designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is precision-stamped from steel to original factory specifications,...

Product#: TF400780

1956 Chevrolet 150, 210, Bel Air, Nomad; Inner Rear Bumper Bracket; RH Passenger Side

Reproduction of the original rear bumper to frame bracket designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in all...

Product#: TF400267

1955 Chevy 150, 210, Bel Air, Nomad; Bumper Bracket; Inner RH Front; Inner LH Rear

Reproduction bumper to frame bracket for 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is manufactured in stamped steel to the factory configuration and replaces the old or bent original bracket exactly....

Product#: TF400250

1956 Chevrolet Bel Air, 150, 210: Inner Front Bumper Bracket; RH Passenger Side

Reproduction of the original inner front bumper to frame bracket for use with 1956 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Nomad models. Each bracket is manufactured in stamped steel to original factory...

Product#: TF400246

1956 Chevrolet Bel Air, 150, 210, Nomad; Front Outer Bumper Bracket; RH Passenger Side

Reproduction of the original center front bumper to frame bracket designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is manufactured from stamped steel to original factory specifications,...

Product#: A1680

1963-64 Impala, Biscayne, Bel Air; Front Bumper Brace; RH Passenger Side; EDP Coated

Restore the structural integrity and appearance of your classic Chevy's front end with this premium reproduction front bumper bracket, designed specifically for 1963?1964 Chevrolet Impala, Biscayne, and Bel Air models....

Product#: TF400252

1957 Chevrolet Bel Air, 150, 210n Nomad: Outer Front Bumper Bracket; RH Passenger Side

Reproduction of the original outer front bumper to frame bracket for use with 1957 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, Nomad, and Del Ray models. Each bracket is manufactured in stamped steel to original...

Product#: TF401222

1957 Chevy Bel Air, 150, 210, Nomad; Rear Bumper End Bracket; RH Passenger Side

Reproduction rear bumper end bracket for 1957 Chevrolet passenger car models. Manufactured in stamped steel to factory specifications. EDP coated for rust prevention. This bracket mounts to the bumper end, and provides...

Product#: TF401221

1957 Chevy Bel Air, 150, 210; Rear Bumper End Bracket; LH Driver Side

Reproduction rear bumper end bracket for 1957 passenger car models. Manufactured in stamped steel to factory specifications. EDP coated for rust prevention. This bracket mounts to the bumper end, and provides additional...

Product#: TF400255

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Frame Bracket; Inner; LH Driver Side

Reproduction of the original inner front bumper to frame bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in...

Product#: TF400254

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Frame Bracket; Center; RH Passenger Side

Reproduction of the original center front bumper to frame bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes...

Product#: TR17758B

Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25

Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...

Product#: TF400258

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper Jack Brace; RH Passenger Side

Reproduction of the original front bumper jack brace designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper jack brace is manufactured in stamped steel and features pre-drilled holes in all the...

Product#: TF400308

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Bumper to Fender Bracket; RH

Reproduction of the original front bumper to fender bracket designed for use with 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in all...

Product#: A15043

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...

Product#: TF402019

1955 Chevrolet 150, 210, Bel Air; Smoothie Bumper Mounting Hardware Set; Front; 36 Piece Set

Front bumper mounting hardware set for smoothie style front bumper on 1955 Chevrolet 150, 210, Bel Air models equipped with the custom smoothie style front bumper. Each 36-piece set includes the necessary hardware to install...

Product#: LF2236601C

1966 Chevrolet Style #1 Red and Chrome License Plate Frame with White Lettering

Flaunt your Chevrolet pride with this OER® custom license plate frame that shows off your vehicle year and model. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes....

Product#: 8557

Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut

Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...

Product#: MN1701

7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap

This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...

Product#: K225

1938-72 GM Car & Truck; Bumper Bolt, Nut, and Washers; 1/2"-13 X 1-1/2"; Chrome

Reproduction bumper bolt, washer, nut for 1947-72 Chevrolet/GMC trucks and 1938-54 Chevrolet passenger cars. Each 4-piece set features the correct chrome-plated carriage bolt with authentic style tall "Domed Head". Bolt can...

Product#: TF400989

1957 Chevy Bel Air, 150, 210, Nomad: Front Bumper Chrome Bullet Housings; LH & RH; Pair

Reproduction front bumper bullet housings for various 1957 Chevrolet Bel Air, 150, 210, Nomad and wagon models. Each housing is manufactured in stamped steel to factory specifications featuring original style polished chrome...

Product#: TF400286

1956 Chevrolet Bel Air, 150, 210, Nomad; Front Filler Panel Set; EDP Coated

Reproduction of the original front end filler panels designed for use on 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each panel is stamped from steel to factory specifications for an authentic appearance and accurate...

Product#: TF400285

1955 Chevrolet Bel Air, 150, 210; Front End Filler Panel Set; 3 Piece Set; EDP Coated

Reproduction of the original front end filler panels designed for use on 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Each panel is precision-stamped from steel to factory specifications, ensuring an authentic...

Product#: TF400287

1957 Chevrolet Bel Air, 150, 210, Nomad; Front Filler Panel Set; EDP Coated

Reproduction of the original front end filler panels designed for use on 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each panel is precision-stamped from steel to factory specifications, ensuring an authentic...

Product#: TF400727

Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...

Product#: B1710

1963 Impala, Bel Air, Biscayne; Front Bumper Bracket Set; 5 Piece Set

Restore your front end with confidence using this correct reproduction front bumper bracket set, engineered specifically for all 1963 Chevrolet Impala, Bel Air, and Biscayne models. Each bracket in this 5-piece set is...

Product#: BL1200

1962 Chevrolet Biscayne, Bel Air, Impala; Rear Bumper Guard Set; Pair

Reproduction of the original rear bumper guards for use with 1962 Impala, Bel Air, and Biscayne models. Each bumper guard is manufactured in die-cast zinc matching the original factory design. Bumper guard are chrome plated...

Product#: TF401223

1957 Chevy Bel Air, 150, 210; Rear Bumper Bracket Set; 6 Piece Set

Reproduction of the original rear bumper brackets designed to install the rear bumper on  1957 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each bracket is manufactured in stamped steel to original...

Product#: B17056

1966 Impala, Bel Air, Biscayne, Caprice; Front Bumper Bracket Set; 4 Piece Set

Restore your classic Chevy's front-end structure with this premium reproduction front bumper bracket set, designed specifically for 1966 Impala, Caprice, Bel Air, and Biscayne models. Each bracket is crafted from high-quality...

Product#: B1700

1963 Impala, Bel Air, Biscayne; Front Bumper Filler Panel; EDP Coated

Reproduction of the original front bumper filler panel for use with 1963 Chevrolet Impala, Biscayne, and Bel Air models. Each bumper filler is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 3962342

1970 Chevrolet Impala, Caprice, Bel Air; Bumper Guard Rubber Cushion Set; Front; Pair

Reproduction front bumper bumper guard rubber cushion set for 1970 Chevrolet Impala, Caprice, Bel Air models. Replaces GM part# 3962342. Sold by the pair. {specs} {fitment}

Product#: *C15323

Plastic Retainer Set; Push-In Type; 1" Head Diameter; For 1/2" Hole; GM # 473798, 5930892, 5973400; Clear; 25 Pieces

Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...

Product#: TF400259

1957 Chevy Bel Air, 150, 210, Nomad; Front Bumper Bullets; Rubber OE Style; Pair

Correct reproduction rubber front bumper bullets for 1957 Chevrolet Bel Air, 150, 210, and Nomad models. Each front bumper rubber bullet is manufactured to correct factory specifications replicating the design, appearance,...

Product#: K49007

License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear

Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...

Product#: B1786

1964 Impala, Bel Air, Biscayne; Rear Bumper Bracket Set; 2 Piece Set; LH Drivers Side

Restore factory-style strength and appearance with this **correct reproduction rear bumper bracket, designed for use on the driver side (LH) of 1964 Chevrolet Impala, Bel Air, and Biscayne models. Manufactured from...

Product#: 14735

1965 Impala, Bel Air, Biscayne; Rear License Plate Lamp Bracket Panel; EDP Coated

Reproduction of the original rear license plate mounting bracket designed for use on 1965 Chevrolet Impala, Bel Air and Biscayne models. Each panel is manufactured in stamped steel to original factory specifications featuring...

Product#: TF400302

1956 Chevrolet Bel Air, 150, 210; Outer Rear Bumper Bracket; LH Driver Side

Reproduction of the original outer rear bumper bracket designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is manufactured from stamped steel to factory specifications and features the...

Product#: TF400303

1956 Chevrolet Bel Air, 150, 210; Outer Rear Bumper Bracket; RH Passenger Side

Reproduction of the original outer rear bumper bracket designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is manufactured in stamped steel to factory specifications and features the correct...

Product#: TF400779

1956 Chevrolet 150, 210, Bel Air, Nomad; Inner Rear Bumper Bracket; LH Drivers Side

Reproduction of the original rear bumper to frame bracket designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each bumper bracket is manufactured in stamped steel and features pre-drilled holes in all...

Product#: TF400248

1956 Chevrolet Bel Air, 150, 210, Nomad; Center Front Bumper Bracket; RH Passenger Side

Reproduction of the original center front bumper to frame bracket designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is precision-stamped from steel to original factory specifications,...

Product#: TF400266

1955 Chevy 150, 210, Bel Air, Nomad; Front Bumper Bracket; Inner LH Front; Inner RH Rear

Reproduction bumper to frame bracket for 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Each bracket is manufactured in stamped steel to the factory configuration and replaces the old or bent original bracket exactly....

Product#: TF400249

1956 Chevrolet Bel Air, 150, 210: Inner Front Bumper Bracket; LH Drivers Side

Reproduction of the original inner front bumper to frame bracket for use with 1956 Chevrolet Bel Air, One-Fifty Series, Two-Ten Series, and Nomad models. Each bracket is manufactured in stamped steel to original factory...

Product#: 153999B

1981-87 Buick Regal; Rear License Plate Bracket; also Universal Fit for Trucks and Street Rods with Custom Roll Pans

License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...