Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: A3178

1958-63 Chevy, GMC Truck, 1958-61 Impala, Full Size; Headlamp Adjuster Screw & Nut Set; 8 Piece Set

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 8 Pieces - (1) adjusting screw, (1) plastic adjusting nut, (2) mounting screws with (2) washers and (2) nuts. 4 sets are...

Product#: TF400533

1955-63 Chevrolet Full Size Passenger; Headlamp Retaining Ring Spring; 2nd Design

Reproduction of the original spring used on the headlamp retaining ring spring for various 1955-63 Chevrolet models including Tri-5, Impala and Corvette models. Replaces OEpart numbers # 5946543, 5948814 2nd design. {fitment}

Product#: 6027292

1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...

Product#: TF400534

1955-57 Chevrolet 150, 210, Bel Air; Headlamp Adjuster Set; Headlamp Bucket Rebuild Kit

Replacement headlamp adjuster set to repair the headlight buckets on 1955-57 Chevrolet passenger car models. Each set includes 39 total pieces - (2) headlight adjusting screws, (2) plastic replacement adjusting screw nuts,...

Product#: TF401006

1957 Chevy Bel Air, 150, 210, Nomad; Headlamp Bezel Screw Set

Reproduction headlamp bezel screws for all 1957 models. Manufactured in the correct size and finish. One set required per vehicle.

Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.

Product#: *B1436

1962-68 Impala and Fullsize; 1/4-28 x 1" GM Headlamp Adjuster Screw With Nylon Nut; 16 Piece Set

Correct reproduction of the headlamp beam adjusting hardware set for various 1962-up GM models. Includes (8) nylon nuts, (8) 1/4"-28 x 1" adjuster screws. Each 16-piece set includes enough adjusters for both the right and...

Product#: A1026

1/4"-28 GM Headlight Beam Nylon Adjuster Nut

This 1/4"-28 headlight beam adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly. Fits a wide variety of GM vehicles from 1962-on. Use as required. Sold individually....

Product#: B1434

1947-57 GM Headlamp Adjusting Screw and Nut Set

Headlamp Adjustment screw set for various 1947-57 GM models including Bel Air, Nomad, and Pickup. The correct hardware will make your installation easier, and give your classic a finished look. Sets includes adjuster screws...

Product#: *B1437

1965-75 Impala / Full Size Headlamp Adjuster Screw And Nut Set

Reproduction of the headlamp adjusting hardware required for 1965-75 Impala, Biscayne, Bel Air and Caprice, as well as a variety of additional GM applications. This adjustor set contains the hardware required for proper...

Product#: *596686

1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"

Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 9851

1/4"-28 GM Headlamp Adjuster Nylon Nut

This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...

Product#: A5788

1/4-28 GM Headlamp Adjuster Nylon Nut

Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68 Full...

Product#: TF401005

1956 Chevy Bel Air, 150, 210, Nomad; Headlamp Bezel Screw Set

Reproduction headlamp bezel screws for all 1956 models. Manufactured in the correct size and finish. One set required per vehicle.

Product#: A9400115

1940-81 GM; F-Body / Impala / Nova / Truck - Headlamp Retaining Ring Screw Set (6 Pieces)

Headlamp retaining ring screws are used to hold the headlamp bulb to the mounting bucket.

Product#: L19136

1961 Impala; Bel Air; Biscayne; Headlight Bucket to Bezel Mounting Bracket Set; LH or RH

Replacement headlight bezel to bucket mounting bracket set for 1961 Chevrolet full size models. This kit includes (4) headlight bezel brackets, (4) j-nuts and (8) rivets. Each kit includes the brackets for one inner and one...

Product#: TF400543

1955-57 Chevrolet Headlamp Bucket To Body Fasteners With Slotted Pan Head Screws

Headlamp bucket to body fasteners for all 1955-57 models. Set for both headlamps.

Product#: A2303

J Nut #10 Screw Size;.027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size,.027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.

Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.

Product#: TF401074

1941-57 GM Passenger Car; 1947-57 GM Truck; Headlamp Adjuster Screw Retaining Nut

Reproduction headlamp adjuster screw retaining nut for various 1941-57 GM models. Manufactured to fit like the original, this piece is inserted into the headlamp bucket and acts as the mounting point for the adjuster screw....

Product#: TF401004

1955 Chevy Bel Air, 150, 210, Nomad; Headlamp Bezel Screw Set

Reproduction headlamp bezel screws for all 1955 models. Manufactured in the correct size and finish. One set required per vehicle.

Product#: LGH469

1947-59 Chevrolet/GMC Truck; Spring; Headlamp Adjustment; First Design

Reproduction headlaight tension spring for 1941-53 Chevrolet Passenger Cars, and 1941-55 (1st Series) Chevrolet and GMC trucks. Gives tension on sealed beam adjusters to keep lights in proper adjustment. Applicatioon Summary:...

Product#: B10963

Headlamp Adjusting Spring - Pair

Product#: A3209

1/4"-28 x 1" Phillips Headlight Adjusting Screw

Product#: 40708

#8-32 x 1/2" Slotted Round Machine Screw; Zinc

#8-32 x 1/2" Slotted Round Machine Screw with Zinc finish used for a variety of purposes including for mounting headlight adjuster brackets. This screw is found in the set headlamp adjuster screw and nut set, part # A3178....

Product#: 7H7LA

1947-57 GM Truck, 1949-57 Chevrolet Car Frenched Headlamp Conversion Harware only

This is hardware for Hagan Street Rods frenched headlamp conversion. Hardware only.

Product#: K6500

1965 Impala, Bel Air, Biscayne; Headlamp Bezel Lower Clip; Each

This is a reproduction headlamp bezel lower clip for 1965 GM Impala and full size vehicles. These lower clips are manufactured from injection molded tooling replicating the original in quality, design and fitment. This clip...

Product#: 4919653

1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid

Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...

Product#: B1435

1958-63 Buick, Chevy, GMC Truck, Corvette, Impala; Headlamp Adjuster Hardware Set ; 64 Piece Kit; Various Models

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 64 Pieces - (8) adjusting screw, (8) plastic adjusting nut, (16) mounting screws with (16) washers and (16) nuts. 1 set is...

Product#: A8942

Grill to Headlamp Nylon Nut

Reproduction of this special nylon nut used to mount the headlamp bezels on 1965 Chevrolet Full Size models, 1966-70 Pontaic GTO, Lemans, and Tempest models, as well as 1970-73 Pontiac Firebird models. Firebird models...

Product#: CX1229

1955-56 Chevy Bel Air, 150, 210; 1947-57 Chevy, GMC Truck; Headlight Bezel Seals; Pair

Reproduction of the original headlamp bezel seals designed for use on 1947-57 Chevrolet and GMC truck models, and 1955-56 Chevy Bel Air, Nomad, One Fifty and Two Ten models. Each gasket will replace the worn or missing...

Product#: 14014

1958-1966 Bel Air, Impala; 1958-72 Chevy, GMC Truck ; Headlamp Mounting Bucket & Trim Ring Set; 2 Tab; 8 Piece Set

OER®reproduction of the original 2-tab headlamp mounting buckets and headlamp mounting rings designed for use on various GM vehicles including 1958-61 Chevrolet trucks and 1958-72 GMC pickup truck models. Each headlamp...

Product#: *R493

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...

Product#: *R492

Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;

Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...

Product#: A10165

# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head

Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...

Product#: 3982098

U-Type Extruded Clip Nut, Fits 1/4-20 Bolts, Black Phosphate Coated

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. This is the correct nut used to install the rear tail lamp to the body. Can be used to install the rear...

Product#: K89528

Fantastic Plastic Polish; Headlight and Plastic Restorer; Lens Polish; 16 Oz. Pint Bottle

Restores, revitalizes & protects while removing yellow film, cloudy streaks, hairline scratches, haze & halos from clear, smooth plastics. Excellent on headlight covers, taillight lenses, bug deflectors, instrument covers,...