Product#: AK50105

Upholstery Installation and Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4

Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad the seat frame before installing new upholstery. NOTE: Hog rings are required when installing new upholstery. Available separately. Refer...

Product#: SF119

Seat Foam Sheet; Non-Molded; Universal Fit; 36" x 68" X 1-1/2"

This universal fit seat foam is a high density sheet suitable for all non-molded bench seats including rear seats and wagon seats. When replacing the seat covers or upholstery in most trucks or vehicles, this non-molded seat...

Product#: AK50104

1960-78 Upholstery Installation and Padding Kit For Front Bench Seat

Reupholstery padding kit for front bench seat. Comes with material to insulate and pad seat frame prior to installing new upholstery. Includes: 1 30" x 70" x 1-1/2" thick foam 1 10 lb roll of cotton 4 yards of burlap 4 yards...

Product#: AK50101

Front Bucket Seats; Upholstery Installation and Padding Kit

Reupholstery padding kit for front bucket seats. Comes with material to insulate and pad seat frames prior to installing new upholstery. Include enough material to reupholster both front bucket seats on a wide variety of...

Product#: FP307215

Seat Foam Padding Sheet; 30" x 72" x 1.5"

When it comes to the interior, this seat foam padding is perfect when replacing the seat upholstery. Each sheet is 30" x 72" x 1.5" and can be used for virtually any front or rear interior seat to build up the foam and add...

Product#: TF125002

1955-56 Chevrolet 2 Door Front Bench Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory bench seats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: TF125004

1957 Chevrolet 2 Door Front Bench Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory bench seats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: TF125005

1957 Chevrolet 4 Door Front Bench Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory bench seats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: SF597

1959-67 Impala, Bel Air, Caprice; Rear Seat Foam; 2 Door; Hardtop & Convertible

Reproduction of the original rear seat foam for use with 1959-67 Impala hardtop and convertible. 1960-62 Bel Air 2 door hardtop, and 1966-67 Caprice 2 door hardtop models. When replacing the interior upholstery,...

Product#: TF125003

1955-56 Chevrolet 4 Door Front Bench Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory bench seats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: TF125006

1955-57 Chevrolet 2 Door Hardtop Rear Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory rear eats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: TF125007

1955-57 Chevrolet 2 Door Convertible Rear Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory rear eats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: TF125019

1955-57 Chevrolet 2 Door Sedan Rear Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory rear eats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: TF125009

1955-57 Chevrolet Nomad And Wagon Models Rear Seat Foam

This high grade reproduction seat foam is molded to the original contours of the factory rear eats. Designed to fit and install just like the originals. Includes seat back and seat bottom. Made in the USA Note: Shipped...

Product#: SS403

1962-65 Impala, Bel Air, Nova; Bucket Seat Bottom Support Spring; with Side Springs; RH or LH; Each

OER® manufactured reproduction of the original bottom bucket seat support spring assembly designed for use with 1962-1965 Impala, Bel Air, Biscayne, 1962-64 Chevy II and Nova models. Seat springs are often overlooked when...

Product#: SS402

1962-65 Impala, Bel Air, 1962-64 Nova; Bucket Seat Back Support Spring; RH or LH; Each

OER® manufactured reproduction of the original bucket seat back support spring assembly designed for use on 1962-65 Impala, Bel Air, Chevy II, Nova models with bucket seats. Seat springs are often overlooked when...

Product#: TF119106

1957 Chevrolet 2 Door Sedan Tapered Split Back Front And Rear Seat Frame Sets With Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this Front Bucket, Rear Seat Frame, Foam and Slider package from Classic Industries. These frames will bolt into the factory...

Product#: TF119105

1955-56 Chevrolet 2 Door Sedan Tapered Split Back Front And Rear Seat Frame Sets With Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this Front Bucket, Rear Seat Frame, Foam and Slider package from Classic Industries. These frames will bolt into the factory...

Product#: TF119104

1957 Chevrolet 2 Door Sedan Front Split Back And Rear Frame Set With Bolstered Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom front split back frame, rear frame, foam and front slider package from Classic Industries. These frames will bolt...

Product#: TF119108

1957 Chevrolet 2 Door Sedan Front Buckets And Rear Seat Frame Set With Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this Front Bucket, Rear Seat Frame, Foam and Slider package from Classic Industries. These frames will bolt into factory...

Product#: TF119114

1955-57 Chevrolet Front Only Bucket Seats Frame Sets With Foams & Brackets

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this Bucket Seat Frame, Foam and Slider package from Classic Industries. These frames will bolt into factory outer holes...

Product#: TF119101

1955-56 Chevrolet 2 Door Sedan Front Split Back And Rear Frame Set With Standard Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom front split back frame, rear frame, foam and front slider package from Classic Industries. These frames will bolt...

Product#: TF119102

1955-56 Chevrolet 2 Door Sedan Front Split Back And Rear Frame Set With Bolstered Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom front split back frame, rear frame, foam and front slider package from Classic Industries. These frames will bolt...

Product#: TF119103

1957 Chevrolet 2 Door Sedan Front Split Back And Rear Frame Set With Standard Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom front split back frame, rear frame, foam and front slider package from Classic Industries. These frames will bolt...

Product#: TF119110

1955-56 Chevrolet Front Only Split Back Frame Set With Bolstered Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom split back seat frame, foam and slider package from Classic Industries. These frames will bolt into the factory...

Product#: TF119112

1957 Chevrolet Front Only Split Back Frame Set With Bolstered Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom split back seat frame, foam and slider package from Classic Industries. These frames will bolt into the factory...

Product#: SS407

1968-69 Impala, Bel Air, 1968-72 Nova, Chevelle; Bucket Seat Bottom Support Spring; RH or LH; Each

OER® manufactured reproduction of the original bottom bucket seat support spring assembly designed for use with 1968-69 Impala, Bel Air, Biscayne, Caprice, and 1968-71 Chevy II Nova, and Chevelle bucket seat models. Seat...

Product#: SS404

1966-67 Impala, Bel Air, Nova, Chevelle; Bucket Seat Back Support Spring; RH or LH; Each

OER® manufactured reproduction of the original bucket seat back support spring assembly designed for use on 1966-67 Impala, Bel Air Biscayne, Chevy II, Nova, Chevelle and El Camino models with bucket seats. Seat springs...

Product#: TF118621

1955-56 Stock Style Split Back Front Seat Foam

Stock style seat foam to work with Glide Split-back seat frames for 1955-56 Chevy models.

Product#: TF119107

1955-56 Chevrolet 2 Door Sedan Front Buckets And Rear Seat Frame Set With Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this Front Bucket, Rear Seat Frame, Foam and Slider package from Classic Industries. These frames will bolt into factory...

Product#: TF119113

1955-57 Front Only Tapered Back Frame With Armrest And Foam

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom split back seat frame, foam and slider package from Classic Industries. This frame will bolt into the factory...

Product#: SH01

1967-69 F-Body Seat Heater (1967-69 Standard; 1967 Deluxe)

Add comfort to your classic with this great seat heater. Safe and durable, heat up in seconds and quickly provide comforting warmth through the seat cushions long before the car's heater has had a chance to heat up the...

Product#: TF119109

1955-56 Chevrolet Front Only Split Back Frame Sets With Standard Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom split back seat frame, foam and slider package from Classic Industries. This frame will bolt into the factory...

Product#: TF119111

1957 Chevrolet Front Only Split Back Frame Sets With Standard Foams

Over the years seat frames break down, need re-welding or are completely missing. Replace them with this custom split back seat frame, foam and slider package from Classic Industries. This frame will bolt into the factory...

Product#: SH18

1968 F-Body with Deluxe interior Seat Heater

Add comfort to your classic with this great seat heater. Safe and durable, heat up in seconds and quickly provide comforting warmth through the seat cushions long before the car's heater has had a chance to heat up the...