Product#: 6593-BDVJ

Edelbrock Air-Fuel Ratio Monitor Narrow Band

The Edelbrock part #6593 Narrow Band LED Air-Fuel Ratio Monitor was designed for use with all aftermarket carburetor and EFI kits. The kit comes complete with an LED light display, oxygen sensor, sensor bung and wire harness....

Product#: K0062

1967-70 Camaro Z28; Carburetor Choke Set; with Holley Carb; Small Block / Big Block; 5 Piece Set

Reproduction of the original carburetor choke set designed for use with 1967-70 Camaro Z28 , Impala, Nova, small block, and big block (396) models with Holley carburetor. Includes all the necessary components to replace an...

Product#: K0108

1967-69 Camaro, Impala, Chevy Truck; Choke Kit; 396/325hp, 396/350hp; with 4 bbl. Carburetor

Reproduction of the original components required to replace the choke for various 1967-69 Chevrolet models with 396/325hp, 396/350hp big block engines and 4 bbl. carburetor. Replace your damaged or worn choke assembly with...

Product#: E390

1967-70 Camaro; Quadrajet Remote Choke Spring

Reproduction of the original style remote choke spring designed for use with 1967-70 Camaro, Impala, and Nova models with Quadrajet carburetors. Over many years of driving, the choke coil winding can suffer undue distortion...

Product#: 3578-BDVJ

Edelbrock ;Air Charge Temperature Sensor

The Edelbrock #3578 Air Temp Sensor is for push in connections. This Edelbrock #36018 Air Temp Sensor includes a rubber grommet and has a range from -40 to 284 Deg Fahrenheit. {fitment}

Product#: 1256603

Thermostat Choke Mounting Screw

This mounting screw is used to hold the thermostatic choke assembly to the intake manifold. {fitment}

Product#: TF700064

1957 Chevrolet 8 Cylinder With 2 Bbl Stainless Steel Thermal Choke Tube

Reproduction thermal choke tubes for 1957 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700060

1955-56 Chevrolet 235 6 Cylinder Stainless Steel Thermal Choke Tube

Reproduction thermal choke tubes for 1955-56 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700062

1955-56 Chevrolet 8 Cylinder With 4 Bbl Stainless Steel Thermal Choke Tube

Reproduction thermal choke tubes for 1955-56 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: K0041

1970-72 Chevy Camaro, Impala, Nova, Truck; Choke Coil Cover; Big Block 396, 402

Correct reproduction of the original remote choke thermostat coil cover designed for use with 1970-72 Chevy L78, 396 and 402 ci models with Quadrajet 4 bbl. carburetor with the choke thermostat mounted to the intake manifold....

Product#: TF700054

1955-56 Chevrolet 8 Cylinder With 2 Bbl Original Material Thermal Choke Tube

Reproduction thermal choke tubes for 1955-56 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700053

1955-56 Chevrolet 235 6 Cylinder Original Material Thermal Choke Tube

Reproduction thermal choke tubes for 1955-56 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700055

1955-56 Chevrolet 8 Cylinder With 4 Bbl Original Material Thermal Choke Tube

Reproduction thermal choke tubes for 1955-56 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: K0107

1967-70 Chevrolet; Quadrajet Choke Assembly; 327/350HP; Reproduction

Reproduction of the original style choke assembly designed for use on various 1967-70 Chevrolet 327/350hp with quadrajet models. Replace your damaged or worn choke assembly with this complete choke assembly set. Each choke...

Product#: E1932

1955-86 Chevrolet Small Block; Edelbrock Choke Set

Choke set for use when using hot air choke carburetors and Performer manifolds with 1955-86 Small Block Performer cylinder heads. {fitment}

Product#: H452231

Holley; Carburetor Electric Choke Conversion Kit; Shiny Finish

This kit can be used to convert Holley carburetors which originally came equipped with a manual choke. Note: Includes mounting hardware.

Product#: TF700491

1957-61 Chevrolet Carburetor Choke Assembly

To provide rich fuel mixture required to sustain operation at low engine temperatures, a choke is used to restrict flow of air at entrance of carburetor, before the venturi. With this restriction, extra vacuum is developed in...

Product#: K0110

1970-72 Camaro, Impala, Chevy Truck; Choke Kit; Big Block 402, 454 with 4 bbl Quadrajet

Reproduction of the original components required to replace the choke for various 1966-69 Chevrolet models with 402, 454 big block engines and 4 bbl. carburetor. Replace your damaged or worn choke assembly with this complete...

Product#: TF700189

1956-58 Chevrolet With 4bbl Carter Wcfb Carburetor Unthreaded Choke Housing

Replace your missing Carter carburetor single quad choke housing. Keep the original carburetor on your Chevrolet by replacing the missing parts. Why replace it and loose points at the next car show.

Product#: TF700490

1955-61 Chevrolet Dual Quad Carburetor Choke Cap Set

To provide rich fuel mixture needed in cold temperatures, a choke is used to restrict flow of air at entrance to carburetor, before venturi. Includes gasket, plate, clips and screws. Made from thermoplastic like original.

Product#: E389

1967-70 Camaro; Holley Remote Choke Spring; with 4 barrel

Reproduction of the original style Holley remote choke spring designed for use with 1967-70 Camaro, Impala, and Nova models with Holley 4 barrel carburetors. Over many years of driving, the choke coil winding can suffer undue...

Product#: TF700065

1957 Chevrolet 8 Cylinder With 4 Bbl Stainless Steel Thermal Choke Tube

Reproduction thermal choke tubes for 1957 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700061

1955-56 Chevrolet 8 Cylinder With 2 Bbl Stainless Steel Thermal Choke Tube

Reproduction thermal choke tubes for 1955-56 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700066

1957 Chevrolet 8 Cylinder With Dual 4 Bbl Carburetors Stainless Steel Thermal Choke Tube

Reproduction thermal choke tubes for 1957 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700058

1957 Chevrolet 8 Cylinder With 4 Bbl Original Material Thermal Choke Tube

Reproduction thermal choke tube for 1957 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700057

1957 Chevrolet 8 Cylinder With 2 Bbl Original Material Thermal Choke Tube

Reproduction thermal choke tube for 1957 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700059

1957 Chevrolet 8 Cylinder With Dual 4 Bbl Carbs Original Material Thermal Choke Tube -

Reproduction thermal choke tube for 1957 Chevy models. This choke tube features all the correct contours for an exact replacement.

Product#: TF700188

1956-61 Chevrolet With 4bbl Carter Wcfb Dual Quad Carburetor Threaded Choke Housing

Replace your missing carburetor choke housing. Keep the original carburetor on your Chevrolet by replacing the missing parts. Why replace it and loose points at the next car show.

Product#: 1256602

1965-72 Chevrolet, GMC; Choke Rod; Various Car and Truck Models: 4-1/8" Long

Reproduction of the original choke rod designed for use with a variety of 1965-72 Chevrolet and GMC car and truck models as listed below. During a multitude of years and mechanics modifications, the choke rod is suceptable to...

Product#: H45258

Holley; Choke Thermostat Assembly; for Carburetor Models 2300, 4150, 4160, 4010 and 4011

Holley replacement electric choke cap for carburetor models 2300 4150 4160 4010 4011. Includes new Choke cap gasket. {Fitment}