Product#: BG6004

Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: BAG6074

1955-57 Chevy Lokar Billet Accelerator Pedal Assemby - Small Block - Brushed w/Rubber Inserts

Lokar 1955-57 Chevy fullsize passenger car models billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing yout o change from the factory rod linkage to a modern throttle...

Product#: BAG6073

1955-57 Chevy Lokar Billet Accelerator Pedal Assemby - Small Block - Ball Milled Finish

Lokar 1955-57 Chevy fullsize passenger car models billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing you to change from the factory rod linkage to a modern throttle...

Product#: B199245

1958-67 Chevrolet; Billet Aluminum Floor Mount Gas Pedals; Black - Billet Specialties

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install. {fitment}

Product#: B199250

1955-57 Chevrolet Passenger Car; Billet Aluminum Floor Mount Gas Pedals; Polished - Billet Specialties

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install. {fitment}

Product#: B199240

1958-67 Chevrolet; Billet Aluminum Floor Mount Gas Pedals; Polished - Billet Specialties

These CNC machined pedal pads are specifically designed to compliment your Billet Specialties gas pedal. Each pad includes all the stainless steel hardware needed for a quick and clean install. {fitment}

Product#: BAG6113

1955-57 Chevy - Lokar Billet Accelerator Pedal Assemby - Brushed Finish

Direct replacement billet aluminum pedal assemblies for 1955-57 Chevy full-size passenger models. Each throttle assembly has been designed to eliminate the factory rod linkage, utilize a modern Lokar throttle cable system and...

Product#: BAG6113B

1955-57 Chevy - Lokar Billet Accelerator Pedal Assemby - Black Finish

Direct replacement billet aluminum pedal assemblies for 1955-57 Chevy full-size passenger models. Each throttle assembly has been designed to eliminat e the factory rod linkage, utilize a modern Lokar throttle cable system...

Product#: BAG6112

1955-57 Chevy - Lokar Billet Accelerator Pedal Assemby - Ball Milled Finish

Direct replacement billet aluminum pedal assemblies for 1955-57 Chevy full-size passenger models. Each throttle assembly has been designed to eliminate the factory rod linkage, utilize a modern Lokar throttle cable system and...

Product#: B199155

Billet Specialties Billet Aluminum Cable Style Gas Pedal Assembly - Black

Add a touch of class to the interior of your Tri-Five Chevy with one of these CNC machined cable style gas pedal assemblies from Billet Specialties. These pedals convert your old linkage to a more modern cable style linkage...

Product#: B199150

Billet Specialties Billet Aluminum Cable Style Gas Pedal Assembly - Polished

Three piece universal billet aluminum pedal kits from Billet Specialties. These kits come with easy to use drill templates and all the necessary stainless steel hardware for installation.

Product#: BAG6074B

1955-57 Chevy Lokar Billet Accelerator Pedal Assemby - Small Block - Black w/Rubber Inserts

Lokar 1955-57 Chevy fullsize passenger car models billet aluminum throttle pedal assembly is designed to bolt into the stock location on the firewall, allowing yout o change from the factory rod linkage to a modern throttle...

Product#: BAG6004

Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: BAG6001

Lokar Billet Aluminum Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and a Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: SG6016

Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: SG6007

Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: B199255

1955-58 Chevrolet Passenger Car; Billet Aluminum Floor Mount Gas Pedals; Black - Billet Specialties

Add a touch of class to the interior of your Chevy with one of these CNC machined floor mount gas pedals from Billet Specialties. They are a simple bolt-in replacement for the stock pedal and can install in minutes. {fitment}

Product#: FM6099

Lokar Eliminator Black Anodized Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: BG6012

Lokar Black Anodized Aluminum Throttle Assembly X-Large 2" x 5" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: DBW6200A

Lokar CTS-V Drive-By-Wire Pedal Pad - Brushed w/Rubber Inserts

Billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved pedal pad...

Product#: DBW6200B

Lokar CTS-V Black Anodized Billet Accelerator Pedal

Direct-fit billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved...

Product#: 10379038

1967-76 Chevrolet; Drive By Wire Pedal; for LS Engines

GM replacement pedal for drive by wire applications. OE# 10379038. Factory original design for 2004-14 Cadillac CTS. Use with the following drive by wire brackets: DBW6300 1967-68 Camaro DBW6301 1969 Camaro DBW6302 1970-81...

Product#: TF700447

1955-57 Chevrolet Throttle Linkage And Pedal To Firewall Mounting Hardware

Reproduction throttle linkage bolts and washers for 1955-57 Chevy models. Designed to mount throttle linkage to the firewall. Worn hardware should replaced to prevent sticky accelerator linkage. Also mounts the accelerator...

Product#: G13229

1967-76 Chevrolet; Drive By Wire Pedal for LS Engines; 10379038 - Genuine GM

Genuine GM pedal for drive by wire applications. Original equipment for 2004-14 Cadillac CTS. Replaces OE# 10379038. Use with the following drive by wire brackets: DBW6300 1967-68 Camaro DBW6301 1969 Camaro DBW6302 1970-81...

Product#: BFG6012

Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: BFG6010

Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: DBW6304

1955-57 Chevy Bel Air LS Engine Drive By Wire Pedal Bracket Set (Pedal Sold Separately)

Designed to be a bolt-on installation, this bracket set adapts the popular GM 10379038 or equivalent pedal to your 1955-57 Bel Air, Nomad, 210, & 150 models. Simply remove the factory throttle linkage and bolt this bracket in...

Product#: SG6017

Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: GPS6016B

Lokar Black Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA