Product#: 14022

1961-64 Impala, Bel Air, Biscayne; Front Floor Pan Support Brace; EDP Coated

Reproduction of the original front floor pan support brace designed for use with 1961-64 Chevrolet Impala and Full Size models. Each brace is manufactured in quality stamped steel to OE specifications. Features correct...

Product#: TF400527

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Front Floor Brace; Long; except Convertible & 4 Door Hardtop Models

Reproduction long front floor brace for all 1955-57 Chevrolet models except convertible and 4-door hardtop. This brace welds across the underside of the center floor pan. Features and Benefits: Stamped steel construction...

Product#: B6841

1961-64 Impala, Bel Air, Biscayne; Under Rear Seat Brace; RH or LH; Each

Reproduction of the original under rear seat brace designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each brace is manufactured in quality stamped steel to the OE configuration replicating the...

Product#: B11015A

1965-70 Impala, Bel Air, Biscayne, Caprice; Center Floor Pan Support Brace; EDP Coated

Reproduction of the original center floor pan support brace for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each brace is manufactured in stamped steel to original factory specifications...

Product#: TF400526

1955-57 Chevrolet Bel Air, 150, 210; Short Floor Pan Center Brace; RH or LH; Each

Reproduction of the original short floor center brace designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. This support welds to the underside of the front floor, forward of the under seat braces. Each...

Product#: TF400519

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Front Floor Brace at Cowl; LH Drivers Side

Reproduction of the original front floor brace at the cowl. Fits all 1955-57 Chevrolet models. Each front floor brace is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: TF400899

1955-57 Chevy Bel Air, 150, 210; Floor Wiring Covers; 4 Door Hardtop; Front and Rear

Reproduction of the original style floor wiring covers for use with various 1955-57 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series 4 door hardtop models. Each cover is manufactured to original factory specifications...

Product#: TF400535

1955-57 Chevrolet Bel Air, 150, 210; Rear Seat Floor Brace; Reinforcement Plate; LH Driver Side

Reproduction rear seat floor brace for all 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: TF400532

1955-57 Chevrolet RH Under Seat Brace

Reproduction of the original under seat brace for all 1955-57 Bel Air, 150, 210, and Nomad models. This brace welds to the underside of the floor on the driver side between the short floor brace and the long front floor...

Product#: TF400900

1955-57 Chevy Bel Air, 150, 210; Rear Floor Wiring Covers; 2 Door Sedan; Pair

Reproduction of the original rear floor wiring covers for use with 1955-57 Bel Air, One-Fifty Series, and Two-Ten Series 2 door sedan models. Fits on top of the floor under the rear quarter window area to cover the wiring...

Product#: TF400861

1955-57 Chevrolet Bel Air Convertible; Seat Riser to B-Pillar Support Bracket; RH Passenger Side

This reproduction support brace reinforces the connection between the B-pillar support brace and the rear seat riser on the right side (passenger side). Used on 1955-1957 Chevrolet Bel Air convertibles only. Features and...

Product#: GN110281

1974-92 Buick, Chevrolet, Pontiac, Oldsmobile; Front Floor Pan Plug; 3-3/4" x 3-1/2"; Various Models

Reproduction original style floor pan plug designed for use on various 1974-92 GM models. Each floor pan plug is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: *84L020

Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....

Product#: TF400528

1955-57 Chevrolet Bel Air; Long Front Floor Brace; Convertible

Reproduction of the original style long center floor brace unit designed for use with all 1955-57 Chevrolet Bel Air convertible models. This support welds across the underside of the floor between the trunk floor and the...

Product#: TF401569

1955-57 Chevrolet Bel Air, 210; Rear Floor to B-Pillar Brace; 4 Door, Hardtop; LH Driver Side

Reproduction B-pillar brace reinforces the connection between the B-pillar and floor on the left side (driver side). Used on 1955-1957 Chevrolet Bel Air and 210 4-door hardtop models. Features and Benefits: Authentic...

Product#: TF401570

1955-57 Chevrolet Bel Air, 210; Rear Floor to B-Pillar Brace; 4 Door, Hardtop; RH Passenger Side

Reproduction B-pillar brace reinforces the connection between the B-pillar and floor on the left side (driver side). Used on 1955-1957 Chevrolet Bel Air and 210 4-door hardtop models. Features and Benefits: Authentic...

Product#: TF400523

1955-57 Chevrolet Bel Air, 150, 210; Center Floor Brace; Long

Reproduction of the original style long center floor brace unit designed for use with all 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. This support welds across the underside of the floor between the trunk floor and...

Product#: TF400538

1955 Chevrolet All Models - 1956-57 Convertible Models RH Cowl To Floor Pan Brace

This reproduction right hand cowl to floor brace connects the inner dash kick panel area down to the front corner of the driver side floor pan. Made in the USA. Applications: 1955: All Models 1956-57: Convertible Only

Product#: TF400537

1955 Chevrolet 150, 210, Bel Air All; 1956-57 Bel Air Convertible; Kick Panel Brace; Cowl To Floor Pan; LH

This reproduction left hand cowl to floor brace connects the inner dash kick panel area down to the front corner of the driver side floor pan. Produced in stamped steel. Also known as a kick panel brace. Applications: 1955...

Product#: B11014A

1965-70 Impala, Bel Air, Biscayne, Caprice; Front Floor Pan Support Brace; EDP Coated

Reproduction of the original front floor pan support brace used on 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each brace is manufactured in stamped steel to original factory specifications featuring...

Product#: B11016A

1965-70 Impala, Bel Air, Biscayne, Caprice; Rear Floor Pan Support Brace; EDP Coated

Reproduction of the original center floor pan support brace for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each brace is manufactured in stamped steel to original factory specifications,...

Product#: TF400520

1955-57 Chevrolet Bel Air, 150, 210, Nomad; Front Floor at Cowl Brace; RH Passenger Side

Reproduction of the original front floor brace at the cowl. Fits all 1955-57 Chevrolet models. Each front floor brace is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: TF400898

1955-57 Chevy Bel Air, 150, 210; Floor Wiring Covers; 4 Door Sedan / Station Wagon

Reproduction of the original style floor wiring covers for use with various 1955-57 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models. Each cover is manufactured to original factory specifications offering a...

Product#: M1783A

1965-70 Impala, Bel Air, Biscayne, Caprice; Under Floor Pan Side Support; LH Drivers Side

Reproduction of the original under floor pan side support designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each support is manufactured in stamped steel to original factory specifications...

Product#: M1782A

1965-70 Impala, Bel Air, Biscayne, Caprice; Under Floor Pan Side Support; RH Passenger Side

Reproduction of the original under floor pan side support designed for use with 1965-70 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Each support is manufactured in stamped steel to original factory specifications...

Product#: TF400536

1955-57 Chevrolet Bel Air, 150, 210; Rear Seat Floor Brace; Reinforcement Plate; RH Passenger Side

Reproduction rear seat floor brace for all 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: TF400521

1955-57 Chevrolet Bel Air, 150, 210; Rear Short Floor Brace; Hardtop, Convertible; LH Drivers Side

Reproduction of the original rear short floor brace designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. This support welds to the underside of the floor on the driver side...

Product#: TF400531

1955-57 Chevrolet Bel Air, 150, 210; Under Seat Brace; LH

Reproduction of the original under seat brace for all 1955-57 Bel Air, 150, 210, and Nomad models. This brace welds to the underside of the floor on the driver side between the short floor brace and the long front floor...

Product#: TF400522

1955-57 Chevrolet Bel Air, 150, 210; Rear Short Floor Brace; Hardtop, Convertible; RH Passenger Side

Reproduction of the original rear short floor brace designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad hardtop and convertible models. This support welds to the underside of the floor on the passenger side...

Product#: TF500295

1955-57 Chevrolet Full Size; Rear End Snubber Bracket; With Rubber Bumper

1955-57 Chevrolet full size models rear end snubber bracket. This bracket welds to the underside of the floor right above the differential to act as a "bump stop" to keep the differential from hitting the underside of the...

Product#: TF401571

1955-57 Chevrolet Full Size; Rear Seat Floor Pockets; pr

Reproduction rear seat pickets for 1956-57 4-Door Hardtop & 1955-57 Sedans. These install into the rear floor underseat pan to retain the seat bottom. {fitment}

Product#: TF400860

1955-57 Chevrolet Bel Air Convertible; Seat Riser to B-Pillar Support Bracket; LH Driver Side

This reproduction support brace reinforces the connection between the B-pillar support brace and the rear seat riser on the left side (driver side). Used on 1955-1957 Chevrolet Bel Air convertibles only. Features and...

Product#: TF401061

1955-57 Chevy Bel Air, 150, 210, Nomad; Long Front Floor Brace; 4 Door; Hardtop

Reproduction long front floor brace for all 1955-57 four door hardtop models. This brace welds across the underside of the center floor pan.

Product#: TF400525

1955-57 Chevrolet Bel Air, 150, 210; Long Center Brace Repair End; RH, Passenger Side

This brace segment replaces the damaged or rusted end of the long center floor brace. Measures approximately 16" in length and installs on the RH, passenger side. Made in USA. {fitment}

Product#: TF400530

1955-57 Chevrolet RH Long Front Floor Brace Repair End

This brace segment replaces the damaged or rusted end of the long front floor brace on the passenger side.Will not fit 4dr hardtop. Made in USA.

Product#: TF401063

1955-57 Chevy Wagon/Nomad Rear Seat To Floor Mount - LH

Reproduction rear seat to floor mount for 1955-57 Nomad and wagon models. This brace is the support for the seat bottom hinge and features heave gauge steel with correct mounting nut inserts.

Product#: TF401064

1955-57 Chevy Wagon/Nomad Rear Seat To Floor Mount - RH

Reproduction rear seat to floor mount for 1955-57 Nomad and wagon models. This brace is the support for the seat bottom hinge and features heave gauge steel with correct mounting nut inserts.

Product#: RD555702

1955-57 Chevrolet Convertible Rear Seat Floor Bracket

Reproduction of the original rear seat bracket used on 1955-57 Chevy convertible models. Welds to floor to secure rear seat back. Note: Sold as each, two required per vehicle.

Product#: TF400524

1955-57 Chevrolet Bel Air, 150, 210; Long Center Brace Repair End; LH, Driver Side

This brace segment replaces the damaged or rusted end of the long center floor brace. Measures approximately 16" in length and installs on the LH, driver side. Made in USA. {fitment}

Product#: TF400529

1955-57 Chevrolet LH Long Front Floor Brace Repair End

This brace segment replaces the damaged or rusted end of the long front floor brace on the driver side.Will not fit 4dr hardtop Made in USA.

Product#: B6843

1961-64 Impala, Bel Air, Biscayne; Under Front Seat Brace; Bench Seat; Passenger Side

Reproduction of the original under front seat brace designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each brace is manufactured in quality stamped steel to the OE configuration replicating the...

Product#: B6842

1961-64 Impala, Bel Air, Biscayne; Under Front Seat Brace; Bench Seat; LH Drivers Side

Reproduction of the original under front seat brace designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each brace is manufactured in quality stamped steel to the OE configuration replicating the...

Product#: TF400515

1955-57 Bel Air Convertible; Rear Seat Support; Left

Reproduction rear floor seat support for 1955-57 Chevy convertible models. This support welds to the driver side rear floor pan beneath the rear seat.

Product#: TF400516

1955-57 Bel Air Convertible; Rear Seat Support; Right

Reproduction rear floor seat support for 1955-57 Chevy convertible models. This support welds to the passenger side rear floor pan beneath the rear seat.

Product#: B14179

1961-64 Impala, Bel Air, Biscayne; Rear Seat Floor Brace; EDP Coated

Reproduction of the original rear seat floor brace designed for use with 1961-64 Chevrolet Impala, Bel Air, and Biscayne models. Each brace is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 84L017

Ford, Lincoln, Mercury; Floor Pan Metal Plug; Each; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Can be used as a...

Product#: TF400590

1955-57 Chevrolet Convertible; B-Pillar Kick Panel Brace; LH

This reproduction of the original driver side "B" pillar brace provides support to the door jamb area. Welds behind the driver side B-pillar area. {fitment}

Product#: TF400593

1955-57 Chevrolet Convertible RH B-Pillar Bracket

This reproduction of the original passenger side "B" pillar bracket provides support to the door jamb area. Welds behind the driver side B-pillar area. Made in the USA.

Product#: TF400592

1955-57 Chevrolet Convertible LH B-Pillar Bracket

This reproduction of the original driver side "B" pillar bracket provides support to the door jamb area. Welds behind the driver side B-pillar area. Made in the USA.

Product#: TF400591

1955-57 Chevrolet Convertible; B-Pillar Kick Panel Brace; RH

This reproduction of the original passenger side "B" pillar brace provides support to the door jamb area. Welds behind the driver side B-pillar area. {fitment}

Product#: 153050

1961-63 Impala and Full Size Shift Tunnel Cover ; Steel

Reproduction of the original type steel stamped shifter tunnel cover designed for use on 1961-63 Impala and full size Chevrolet models equipped with a manual floor shifted transmission. This is the steel piece that covers the...

Product#: TF400517

1955-57 2-Door Hardtop Rear Seat Support - Left

Reproduction rear floor seat support for 1955-57 Chevy 2-door hardtop models. This support welds to the driver side rear floor pan beneath the rear seat.

Product#: TF400518

1955-57 2-Door Hardtop Rear Seat Support - Right

Reproduction rear floor seat support for 1955-57 Chevy 2-door hardtop models. This support welds to the passenger side rear floor pan beneath the rear seat.