Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: K94764

1988-97 Chevrolet, GMC Pickup; Fuel Tank Neck and Evaperator Hose Set; with Clamps

Reproduction of the original fuel tank filler neck, hoses, and hardware kit designed for use with 1988-97 gas Chevrolet and GMC C/K series pickup truck models. Filler necks are manufactured using heavy duty steel replicating...

Product#: A5700262

1988-98 Chevrolet, GMC C/K GMT400 Pickup Truck; Rear Fuel Tank Support Hanger; Bracket with Strap; Each

Reproduction fuel tank support hanger, bracket and strap for 1988-98 Chevrolet and GMC C/K-Series GMT400 truck models. Each support hanger is manufactured in quality stamped steel to original factory specifications for an...

Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...

Product#: FT5109A

1988-2000 Chevy, GMC Truck; Fuel Tank Mount Straps; 6" Bed, 25 Gal Tank; Coated Steel; Pair

Reproduction of the original style fuel tank mounting straps designed for use with 1988-2000 Chevrolet and GMC pickup truck models. Each strap is manufactured in quality to original factory dimensions replicating the original...

Product#: FT5107A

1988-2000 Chevrolet, GMC Pickup Truck; Fuel Tank Mounting Straps; with 8" Foot Bed; 34 Gallon Tank; EDP Coated Steel; Pair

Reproduction of the original fuel tank mounting straps designed for use with 1988-2000 Chevrolet, GMC pickup truck models with 8 foot bed, 34 gallon tank. Each strap is manufactured in quality stamped steel, galvanized and...

Product#: K915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...

Product#: T76063

Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap

Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...

Product#: TK0120

Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: TK0121

Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: 265385

EFI Fuel Return Adapter Set

When converting a carbureted vehicle to an EFI system that requires a fuel return system, there's no longer any need to buy an expensive fuel tank. This adapter creates a return system simply by cutting a 2-3/4" section out...

Product#: TK0122

Fuel Tank Sending Unit; 5 Hole; "Universal" 10-180 Ohm; For VDO Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: FTA45111

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit; -6AN to 1/4 in. NPT

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...

Product#: AM9109

Autometer; Universal; Fuel Signal Adaptor for Autometer Gauges;

The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy...

Product#: 19161

Holley Sniper EFI; Fuel Tank Sending Unit; 0-90 Ohms

Sniper EFI fuel gauge senders are a big help during your installation. They can be used as a replacement for your existing unit. Or if you decide to upgrade your dash to aftermarket gauges, we have a sending unit with the...

Product#: FTA45113

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...

Product#: M265

Aluminum Flip Top Fuel Cap Gasket; Universal

Rubber gasket for use with our custom aluminum flip top gas cap. Measures 5-1/8" OD, 3-1/4" ID. Six bolt pattern, 4-1/2" center to center. {fitment}

Product#: 567PL

1/4"-18 Hex Head Drain Plug;

Replacement hex head drain plug is 1/4"-18 thread.

Product#: 566PL

1/8"-27 Hex Head Plug

Replacement drain plug is 1/8" PT - 27 thread.

Product#: A2369

#10 x 1/2" Lg Tapping Screw with 5/16" Hex Washer Head; Zinc

Product#: AM3262

Auto Meter Universal Fuel Tank Sending Unit; 240 Ohms Empty, 33 Ohms Full

This is a universal 5-bolt fuel sending unit for use with Auto Meter universal fuel gauges. This unit is not included with the gauges packages and must be purchased separately. It is used with gauges that require 240 ohms...

Product#: CX2140

Universal Flush Mount Fuel Filler Kit

This universal flush mount fuel filler kit can be used on any applications. The polished stainless steel filler is ideal for fuel tank conversion. Features a tethered cap, cap key, and 3 mounting holes for an easy...