Product#: UR822838

Yukon Dura Grip Positraction 8.2" 28 Spline 3.08 And Up Ratios

Yukon Dura Grip® Positraction unit is based on the race-proven four-spring clutch-style design that has been used by GM for years. Assembled with heavy-duty 4320 Chrome-Moly spider gears and composite clutches for reduced...

Product#: UR8753090

Yukon Dura Grip Positraction 8.5" 30 Spline 3.08-3.90 Ratios

Yukon Dura Grip® Positraction unit is based on the race-proven four-spring clutch-style design that has been used by GM for years. Assembled with heavy-duty 4320 Chrome-Moly spider gears and composite clutches for reduced...

Product#: 545011

1964-72 GM Truck 8-7/8" 12-Bolt, 10-Bolt; Auburn Gear Select-A-Loc Electric Differential; LSD to Lock; 30 Spline; "C" axle, 4 Series Case

The Select-A-Loc LSD to Lock model locks the axle shafts to the diff housing to transfer torque directly from the case, not through the gears. This electronically-actuated differential operates as a limited slip differential...

Product#: 546044

1976-88 GM 7-1/2"& 7-5/8" 10-Bolt; Auburn Gear Grip-N-Loc Differential; 26 Spline; 3.23/Up

Grip-N-Loc, Auburn Gear's most advanced limited slip differential. The Grip-N-Loc builds upon exclusive technologies previously found in Auburn's limited slip line, but is even more robust to satisfy the extreme demands of...

Product#: *GM10273MKT

GM 10 Bolt 8.5" 2.73 Ring & Pinion Master Set W/Timken Bearings (1.626" Pinion Diameter, 30 Spline)

Replace your worn out or broken ring and pinion gears with new components from Motive Gear. Includes matched ring and pinion gears, pinion bearings, seal, crush sleeve and nut, carrier bearings, shim kit, ring gear bolts,gear...

Product#: LR1930

Powertrax; Lock-Right Locker; 10 Bolt Positive-Locking Differential; 7.5" Ring Gear; 26 Spline Axle; Open Case

If you're looking for extreme traction, Classic Industries® has got it all locked up! This new positive-locking differential is a breakthrough in differential technology, delivering the most traction possible while still...

Product#: LR1931

Powertrax; Lock-Right Locker; 10 Bolt Positive-Locking Differential; 7.6" Ring Gear; 28 Spline Axle; Open Case

If you're looking for extreme traction, Classic Industries® has got it all locked up! This new positive-locking differential is a breakthrough in differential technology, delivering the most traction possible while still...

Product#: LR1921

Powertrax; Lock-Right Locker; 10 Bolt Positive-Locking Differential; 8.5" Ring Gear; 30 Spline Axle; Open Case

If you're looking for extreme traction, Classic Industries® has got it all locked up! This new positive-locking differential is a breakthrough in differential technology, delivering the most traction possible while still...

Product#: G885373

GM 10 Bolt 8.5" 3.73 Ring & Pinion Set

Rear End Type: 10-Bolt Ring Gear Diameter: 8.5" & 8.625" Ratio: 3.73:1 Material: 8620 Mfg #: G885373 Pinion: 30 Spline Pro/Street Motive Gear Line

Product#: M12144

Moser Performance; Ring Gear Performance Differential Cover; 10 Bolt Chevrolet with 8.2" or 8.5"

Strengthen your rear end with a Moser Performance Cover. This cover is made of 356-T6 aluminum and designed to improve ring and pinion gear life, as well as improve the appearance of your vehicle. It will greatly reduce the...

Product#: 141696-BCHW

GM 8.2, 8.5 10 Bolt; Rear End Cover, Chevy Bowtie Emblem

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...

Product#: 141697-BCHW

Chevy Bowtie Emblem Rear End Cover, Gm, 12 Bolt, Passenger Car

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...

Product#: UR10853

1970-96 10 Bolt 8.5" Differential Super Master Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1970-81 Camaro models. Super master bearing set includes differential bearings and races, gasket (or RTV silicone), washers, nuts, ring gear bolts, rear axle...

Product#: 66667-BCHW

1973-96 GM; Rear End Cover; 7.5" 10-Bolt, Aluminum, Black, "Perfect Launch" Logo

Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two...

Product#: LW18000

Lakewood; Universal; Zinc Plated Drive Shaft Safety Loop

Required and approved by all major racing sanctioning bodies this universal driveshaft safety loop is fully adjustable to fit most vehicles. The four piece design is manufactured from 1/4" thick, 2" wide mild steel, bright...

Product#: M7126B

GM 12 Bolt Rear End Cover; Chevy 12-Bolt; Semi Gloss Black

Dress up your 12 Bolt or Dana rear end with our Semi-Gloss Black Powder Coated cover. Available for Chevy 12 Bolt car and Dana 60 rear ends.

Product#: G6045

1965-81 Axle Shaft Lock/C-Clip (.150)

Original replacement locks for applications below. Fits 1967-81 with.150 horseshoe.

Product#: KW577

1967-81 Camaro, Firebird, Impala, Nova; 12 Bolt Rear Differential Cover; OE Style Raw Steel

Reproduction of the original style 12 bolt differential cover designed for use with various 1967-81 GM models including Camaro, Firebird, Impala, Nova, Ventira, Omega, Skylark, and Apollo models as listed. Each cover is...

Product#: 56476CG

12 Bolt Differential Cover Chrome Hex Head Bolt Set with 350 Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a 350 logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: W1563

1965-02 Rear Axle Repair Bearing

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...