Product#: 9793565

1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter

Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...

Product#: 3922525

1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;

Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...

Product#: FMB70

Lokar Floor Shifter Boot with Stainless Steel Ring

This floor mount shifter boot and retaining ring are the perfect match for Lokar's floor mount shifter. Made in USA Inner ring dimension s measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Product#: TCET18086

Tremec TKX 5-Speed Transmission; Ford Applications; Quick Launch Close Ratio; 10-Spline; 0.72 O.D.

These American Powertrain Tremec TKX 5-speed series with overdrive are a high performance transmission rated for 600 ft/lbs of torque capacity, and capable of engine speeds of 8,000 RPM's with shifts at 7,500 RPM's. Each unit...

Product#: 5381000

Hurst; Nitro Stick Shift Handle; With Built-In 12V Switch; Anodized Aluminum Finish

The Hurst Nitro Stick shift handle is designed to bring the classic 'pistol grip' well into the 21st Century. Machined from billet 7075 aluminum, brushed then given a clear anodized finish, the Nitro stick provides a positive...

Product#: 3660001

Hurst; Mastershift Shifter Assembly; 3-Speed Manual

This is our Hurst Mastershift 3-speed shifter assembly without a shift stick or shift ball. It is intended for Universal applications and will require some fabrication to adapt to your build. Same great Mastershift shifter,...

Product#: M37010

MOMO Trofeo Shift Knob - Mohogany / Beech Wood

The MOMO Trofeo shift knob is born through extensive prototyping to find the perfect ergonomics for the driving enthusiast in a manual vehicle. It can be grasped in the palm of the hand but is equally adept for three-finger...

Product#: 5388620

Hurst; Competition Plus Shifter Stick; 15.45" Tall; Chrome; For Use With Bench Seat

The Hurst Competition/Plus bolt-on shift sticks are ideal for use where a particular height or offset is required. This stick is specifically designed for bench seat applications. The shift sticks are constructed from high...

Product#: 53800HST

Hurst; Tube Style Shifter Stick; Chrome; 16"; M/T

Hurst shifter sticks are a great way to bring a more modern look to your interior. They also provide comfort by offering the correct height and pullback required for individual needs. With common attachments on both ends,...

Product#: 5388022

Hurst; Competition Plus Shifter Stick; Chrome; 12" Tall; Set Back 7.5"; M/T

Hurst Competition/Plus bolt-on shift sticks are ideal for use where a particular height or offset is required. These shift sticks are constructed from high strength steel, are stamped with the Hurst name and triple chrome...

Product#: MS11069BK

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Gloss black

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11069CA

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Clear anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11069CL

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Clear coat

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: LK611

Lokar Brushed Billet Aluminum Tremec TKO 500-600 Single Bend 10" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK613B

Lokar Black Billet Aluminum Tremec TKO 500-600 Straight 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK614B

Lokar Black Billet Aluminum Tremec TKO 500-600 Single Bend 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK620B

Lokar Black Billet Aluminum Tremec / Borg Warner T5 T56 Straight 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK612

Lokar Brushed Billet Aluminum Tremec TKO 500-600 Single Bend 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK615

Lokar Brushed Billet Aluminum Tremec TKO 500-600 Straight 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK617

Lokar Brushed Billet Aluminum Tremec / Borg Warner T5 T56 Single Bend 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK616B

Lokar Black Billet Aluminum Tremec / Borg Warner T5 T56 Single Bend 10" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK616

Lokar Brushed Billet Aluminum Tremec / Borg Warner T5 / T56 Single Bend 10" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK618B

Lokar Black Billet Aluminum Tremec / Borg Warner T5 T56 Straight 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: 5389024

Hurst; Billet Plus Shifter Stick; Black Machined Finish; 8" Tall; Set Back 2.88"; M/T

This replacement Hurst Billet/Plus shift stick is a great way to bring a more modern look to your vehicle's interior. The 8-inch tall stick is CNC machined from billet 7075 aluminum, given a MIL-Spec black anodized finish and...

Product#: MS11068BA

Shifter bezel kit with boot; Billet Aluminum; Ball Milled style; 5.25"W X 6.75"L; Black anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Ball Mill design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11068MB

Shifter bezel kit with boot; Billet Aluminum; Ball Milled style; 5.25"W X 6.75"L; Matte black

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Ball Mill design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: LK6662

Lokar Chrome Tubular Tremec TKO 500-600 / Magnum Single Bend 16" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: LK6603

Lokar Chrome Tubular Tremec TKO 500-600 / Magnum Single Bend 10" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: LK6604

Lokar Chrome Tubular Tremec TKO 500-600 / Magnum Double Bend 16" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: 5386900

Hurst; Competition Plus Shifter Stick; Chrome; 13.5" Tall; Seat Back 3.5"; M/T

Hurst Competition/Plus bolt-on shift sticks are ideal for use where a particular height or offset is required. These shift sticks are constructed from high strength steel, are stamped with the Hurst name and triple chrome...

Product#: MS11067CA

Shifter bezel kit with boot; Billet Aluminum; Smooth style; 5.25"W X 6.75"L; Clear anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple smooth design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple installation....

Product#: MS11067BK

Shifter bezel kit with boot; Billet Aluminum; Smooth style; 5.25"W X 6.75"L; Gloss black

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple smooth design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple installation....

Product#: MS11067BA

Shifter bezel kit with boot; Billet Aluminum; Smooth style; 5.25"W X 6.75"L; Gloss black anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple smooth design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple installation....

Product#: 5389016

Hurst; Shifter Stick; Round Bar; Chrome; 11.12" Tall; Set Back 2.26"; M/T

Hurst Competition/Plus bolt-on shift sticks are ideal for use where a particular height or offset is required. These shift sticks are constructed from high strength steel, are stamped with the Hurst name and triple chrome...

Product#: LK6610B

Lokar Black Tubular Tremec / Borg Warner T5, T45 and T56 Single Bend 10" Shift Lever

Lokar tubular steel shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a...

Product#: LK6602B

Lokar Black Tubular Tremec TKO 500-600 / Magnum Single Bend 12" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: LK6601B

Lokar Black Tubular Tremec TKO 500-600 / Magnum Single Bend 16" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: LK6603B

Lokar Black Tubular Tremec TKO 500-600 / Magnum Single Bend 10" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: LK6616B

Lokar Black Tubular Tremec / Borg Warner T5, T45 and T56 Single Bend 16" Shift Lever

Lokar tubular steel shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a...

Product#: 53900HST

Hurst; Tube Style Shifter Stick; Chrome; 10" Tall 5.5" Set Back; M/T

Hurst shifter sticks are a great way to bring a more modern look to your interior. They also provide comfort by offering the correct height and pullback required for individual needs. With common attachments on both ends,...

Product#: 5387238

Hurst; Competition Plus Shifter Stick; Chrome; 7.5"; M/T

Hurst Competition/Plus bolt-on shift sticks are ideal for use where a particular height or offset is required. These shift sticks are constructed from high strength steel, are stamped with the Hurst name and triple chrome...

Product#: 53950HST

Hurst; Tube Style Shifter Stick; Chrome; 16.5" Tall 4.5" Set Back; M/T

Hurst shifter sticks are a great way to bring a more modern look to your interior. They also provide comfort by offering the correct height and pull back required for individual needs. With common attachments on both ends...

Product#: 53902HST

Hurst; Billet Aluminum Shifter Stick; Raw Aluminum; 10" Tall 5.5" Set Back; M/T

Hurst shifter sticks are a great way to bring a more modern look to your interior. They also provide comfort by offering the correct height and pull back required for individual needs. With common attachments on both ends...

Product#: MS11069M

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Raw machined

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11068P

Shifter bezel kit with boot; Billet Aluminum; Ball Milled style; 5.25"W X 6.75"L; Bright polished

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Ball Mill design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: 6014190-HVKP

Bowler Performance Billet Shift Lever; 14"; 19° Kickback; Industrial Through Pocket Design; 3/8-16 Thread Size; Manual Trans; Raw Aluminum

Bowler Performance 14 inch, 19° kickback Industrial Through Pocket Design billet aluminum shift lever for Tremec TKO/TKX 500/600 and T-56 transmissions. Now you have the option to upgrade your interior with this sleek...

Product#: 6014193-HVKP

Bowler Performance Billet Shift Lever; 14"; 19° Kickback; Aviation Style; 3/8-16 Thread Size; Manual Trans; Raw Aluminum

Bowler Performance 14 inch, 19° kickback Aviation Design billet aluminum shift lever for Tremec TKO/TKX 500/600 and T-56 transmissions. Now you have the option to upgrade your interior with this sleek aluminum shifter...

Product#: CB54461

Ring Brothers Universal Billet 12"; Adjustable Shifter Air Frame Natural

Ringbrothers universal billet adjustable shifter arm. Machined from 6061 billet aluminum. Fits most factory and aftermarket manual transmission shifter bases. Includes hardware kit.

Product#: CB54431

Ring Brothers Universal Billet Throwback Shifter 10"; Natural

Ringbrothers universal billet Throwback shifter arm. Machined from 6061 billet aluminum. Fits most factory and aftermarket manual transmission shifter bases. Includes hardware kit.

Product#: CB54421

Ring Brothers Universal Billet Straight Shifter 8"; Natural

Ringbrothers universal billet straight shifter arm. Machined from 6061 billet aluminum. Fits most factory and aftermarket manual transmission shifter bases. Includes hardware kit.

Product#: CB54412

Ring Brothers Universal Billet Throwback Shifter 8"; Black

Ringbrothers universal billet Throwback shifter arm. Machined from 6061 billet aluminum. Fits most factory and aftermarket manual transmission shifter bases. Includes hardware kit.

Product#: 5389025

Hurst; Billet Plus Shifter Stick; Black Machined Finish; 10" Tall; Set Back 3.88"; M/T

This replacement Hurst Billet/Plus shift stick is a great way to bring a more modern look to your vehicle's interior. The 10-inch tall stick is CNC machined from billet 7075 aluminum, given a tough MIL-Spec black anodized...

Product#: 115000HST

Hurst; Billet Shifter Boot & Bezel; Rectangular; Polished

Hurst's new line of billet shifter bezels and boots sets a new standard of style and performance to make your chassis classy. Available in polished or matte black and in either rectangular or round options, there is something...

Product#: 115500HST

Hurst; Billet Shifter Boot & Bezel; Rectangular; Black

Hurst's new line of billet shifter bezels and boots sets a new standard of style and performance to make your chassis classy. Available in polished or matte black and in either rectangular or round options, there is something...

Product#: B266125

Billet Specialties Grid 10" Black Anodized Billet Aluminum Shift Lever

Billet Specialties Grid 10" black anodized billet aluminum shift lever for Tremec TKO500, TKO600 and Borg Warner T-56 transmissions. Each one is precision machined from 6061-T6 aluminum and includes a 3/8-16 stud for the...

Product#: B264810

Billet Specialties Outlaw 8" Polished Billet Aluminum Shift Lever

Billet Specialties Outlaw 8" polished billet aluminum shift lever for Tremec TKO500, TKO600 and Borg Warner T-56 transmissions. Each one is precision machined from 6061-T6 aluminum and includes a 3/8-16 stud for the shift...

Product#: B266120

Billet Specialties Grid 10" Polished Billet Aluminum Shift Lever

Billet Specialties Grid 10" polished billet aluminum shift lever for Tremec TKO500, TKO600 and Borg Warner T-56 transmissions. Each one is precision machined from 6061-T6 aluminum and includes a 3/8-16 stud for the shift...

Product#: B264820

Billet Specialties Grid 8" Polished Billet Aluminum Shift Lever

Billet Specialties Grid 8" polished billet aluminum shift lever for Tremec TKO500, TKO600 and Borg Warner T-56 transmissions. Each one is precision machined from 6061-T6 aluminum and includes a 3/8-16 stud for the shift knob.

Product#: B266115

Billet Specialties Outlaw 10" Black Anodized Billet Aluminum Shift Lever

Billet Specialties Outlaw 8" black anodized billet aluminum shift lever for Tremec TKO500, TKO600 and Borg Warner T-56 transmissions. Each one is precision machined from 6061-T6 aluminum and includes a 3/8-16 stud for the...

Product#: MS11082CL

ShifterBillet Aluminum; Contoured Finish; 10 1/2" Tall; 12X1.7MM Thread; Clear Fusioncoat finish

This shifter is for Tremec and T-5 transmissions and is CNC machined out of 6061-T6 aluminum. It is 10-1/2" tall with a 12 x 1.7mm thread. {FITMENT}