Product#: MN2103

Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set

Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...

Product#: A5196

Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...

Product#: 378362S

1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack

Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...

Product#: 355785S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 353577S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 24171

# 8-18 X 3/8 Phillips Head Sealing Screw; # 9 Head; For Wheel Opening Moldings and Window Reveal Molding Clip; With Bi-Wax Tip

Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...

Product#: A8448

1962-71 GM; Front & Rear Door Molding Fastener, Clip; 1" Long, White Nylon; Requires #8 Tapping Screw; Each

These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...

Product#: A9477

Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw

Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}

Product#: 375480S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 1/8 inch Stud; Fits 1/4 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: A9407

Stainless Steel Trim Screw, #8 x 1-1/2"; #8 Phillips Oval Head

Product#: A1011

Vinyl Top Molding Clip, White Nylon

Correct style plastic stud mounted clips used on various GM vehicles. Replacement vinyl top molding clips for various GM vehicles from 1967-1974. Correct hardware can make any installation job easier. Replace your missing or...

Product#: 23975B

Blind Rivet with Stud; Window Reveal Molding Clip Stud Replacement; 3/32" Diameter;.098 Max Grip; Aluminum

Blind rivet with stud to replace the often rusted out stud that retains window trim moldings.

Product#: 11501047

1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated

OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...

Product#: 4492963

Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated

Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....

Product#: A9863

Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated

Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...

Product#: *A2754K

1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set

Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Product#: *B13145K

Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A2789K

Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A19807K

Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *3917954K

1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models

Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A19378K

Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set

Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...

Product#: *A19626K

Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A8386K

Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A2557K

Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: *A8843K

Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A2560K

Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: *A2562K

Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: 4492963K

Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10

Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...

Product#: A12215

Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each

Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...

Product#: *A9965K

Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set

Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A8581K

Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon, 10 Piece Set

Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...

Product#: *A2744K

Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A2619K

Wire Tail Molding Clip, #10-24, 1-11/32" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A2752K

Wire Tail Molding Clip, #10-24, 1-3/4" Long, Green Dip Coated, 10 piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A8400K

Nylon Tail Push In Molding Clip, 1-3/4" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A2561K

Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 5/8" Diameter Washer Head, 10 Piece Set

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: *A8398K

Nylon Tail Push In Molding Clip, 1" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A2558K

Molding Clip Retaining Pal Nut, #10-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: *A2555K

Molding Clip Retaining Pal Nut, #8-32 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: *881401

Speed Nut 1/4" X 7/8" Dia. X 11/16" O.D.; Pair

Replacement molding clip retaining speed / pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing...

Product#: A2744

Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: A1023

Nylon Retainer 3/4" Diameter Head x 5/16" Diameter Stem x 1" Stem Length; Various GM Models

Correct nylon trim panel retainer (commonly referred to as "Christmas Tree" retainer) for use on a wide variety of GM models throughout the 1970's-90's. Some popular uses include using the pin for retaining the lower portion...

Product#: A2619

Wire Tail Molding Clip, #10-24, 1-11/32" Long, Green Dip Coated

Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...

Product#: A2752

Wire Tail Molding Clip, #10-24, 1-3/4" Long, Green Dip Coated

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: A19807

Wire Tail Molding Clip, #10-24, 2-1/2" Long

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: B13145

Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: A8581

Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon

Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...

Product#: A8386

Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon

Replacement nylon tail style molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: G5231

GM Instant Gel Adhesive

Quick drying instant gel adhesive is great for all minor automotive adhesions. This strong bonding gel is great for loose interior trim, emblems, chrome trim and other items requiring fast and safe bonding. 2 grams.

Product#: B13435

# 8-18 X 3/8 Phillips Head Screw; Washer Head; Round AB #6 HD; Stainless Steel; With Bi-Wax Tip

Replacement molding and trim screws for multiple makes and models. These screws are used to attach rear window molding clips and wheel opening moldings on select 1967-73 Ford and Mercury vehicles and will also attach hood...

Product#: *A10220K

Plastic Body Side Molding Clip, Stud Mount, Green, 10 Piece Set

Correct style plastic stud mounted clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: A2582

#10 X 1 Phillips Oval Head Tap Screw

#10 X 1 Phillips Oval Head Tap Screw. Sold individually. Specifications: Screw Size : #10 Length : 1" Head Style : Phillips Oval Point Type : A/AB Head Size : Std

Product#: A2557

Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: A10220

Plastic Body Side Molding Clip, Stud Mount, Green

Correct style plastic stud mounted clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: A2716

Chrome Trim Screw, #8 x 1-1/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: A19626

Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent)

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: A2558

Molding Clip Retaining Pal Nut, #10-24 Thread Size, 3/4" Diameter Washer Head

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: A2555

Molding Clip Retaining Pal Nut, #8-32 Thread Size, 1/2" Diameter Washer Head

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

Product#: A1933

Chrome Trim Screw, #8 x 1-3/4", With Undersized #6 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: A8843

Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon

Replacement nylon tail style push in molding clips used on various vehicles. Clip head measures 3/4" long, intended for moldings 1/2" to 5/8". Push in stud length 9/16". Correct hardware can make any installation job easier....