Product#: RE1023A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1023B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1023C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: F15925

Flowmaster; 3" Collector To 2.5" System; Header Collector Ball Flange Set

This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. Made in USA Emission Note: 50- State Legal This part is legal for...

Product#: RE1029A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: 66753

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 1" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 66755

PROFORM Wedge-Locking Header Bolts M8 Thread Diameter - 1.181" Long (Set of 12)

These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers bite into and grab the bottom of the bolt head and the top surface of the header. After...

Product#: 66754

PROFORM Wedge-Locking Header Bolts M8 Thread Diameter -.984" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: DE010126

DEI Titanium Exhaust Wrap - 1" x 50 Foot Roll

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

Product#: RE2030A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE2030C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: TT1009

Thermo-Tec® 1" x 15" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: RE1029C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1029B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: 66751

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 3/4" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 21103

Hedman Hedders; 3-Bolt Header Flange Reducers; 3" To 2-1/2"; Mild Steel

3-bolt flange header reducers from Hedman Hedders. These reducers have two flat mating surfaces with a gasket for a leak-free joint. Necessary gaskets and hardware included.

Product#: 66752

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 3/4" Long (Set of 16)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 66756

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 1" Long (Set of 16)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: RE2030B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray- 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: 66757

PROFORM Wedge-Locking Collector Bolts & Nuts 3/8"-16 Thread Diameter - 1" Long (Set of 6)

PROFORM Grade 8 (12.9 steel) exhaust collector bolts and nuts are designed to keep bolts from getting loose. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently...

Product#: DE010128

DEI Titanium Exhaust Wrap - 1" x 15 Foot Roll

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

Product#: 21114

Hedman Hedders; 3" Ball & Socket Header Reducers; 3" To 2-1/4"; Mild Steel

3" ball and socket style header reducers from Hedman Hedders. 2-1/4" Exhaust System, Mild Steel. Necessary hardware included. {specs}

Product#: TT1016

8 Cylinder Quick Wrap Exhaust Jackets

The new quick-wrap, high-velocity Exhaust Jackets™ are an innovative way to insulate and block radiant heat. The jackets cover the header tubes vertically allowing for a consistent fit. The fit allows the exhaust system...

Product#: TT1017

V6-V8 Header Manifold Blanket™

The Header Manifold Blanket™ provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material...

Product#: TT1015

4 / 6 Cylinder Quick Wrap Exhaust Jacket

This new quick-wrap, high-velocity Exhaust Jacket™ is an innovative way to insulate and block radiant heat. The jacket covers the header tubes vertically allowing for a consistent fit. The fit allows the exhaust system...

Product#: TT1014

Thermo-Tec® 2" x 50" x 1/16" Thick Graphite Black Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TT1012

Thermo-Tec® 2" x 50" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TT1013

Thermo-Tec® 1" x 50" x 1/16" Thick Graphite Black Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TT1010

Thermo-Tec® 1" x 50" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: 60406

Painless Oxygen Sensor Bung Fitting

Direct weld-in oxygen sensor fitting for all fuel injection systems. Fits TBI, TPI, CMFI, LT1, LSX, 5.0L and most other oxygen sensors. {specs}

Product#: DE010220

DEI Exhaust Wrap Locking Tie Tightening Tool

A tool developed specifically to tighten the stainless steel locking ties often used on exhaust applications. Fits on the end of any 1/4? drive extension and work on ties up to 1/2' wide.

Product#: TT1011

Thermo-Tec® 2" x 15" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TT1053

Thermo-Tec® 1" x 15" x 1/16" Thick Graphite Black Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: *K89557

OER® Silver Hi-Temp Exhaust Coating Case of 6- 12 Oz Aerosol Cans

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

Product#: *K89559

OER® Cast Iron Gray Hi-Temp Exhaust Coating Case of 6- 12 Oz Aerosol Can

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

Product#: K0090

OER Hi-Temp Exhaust Coating; Cast Iron Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

Product#: *K89558

OER® Black Hi-Temp Exhaust Coating Case of 6- 12 Oz Aerosol Cans

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

Product#: K89555

OER® Hi-Temp Exhaust Coating; Silver; 16 Oz Aerosol Can (Net Wt. 12 Oz.)

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

Product#: K89556

OER Hi-Temp Exhaust Coating; Black; 16 Oz Aerosol Can (Net Wt. 12 Oz.)

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

Product#: TT11031

1" x 50" Generation II Copper Header Wrap

Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology by utilizing a new proprietary coating developed by Thermo-Tec's improved Thermal Conduction Technology (TCT™). Features:...

Product#: TT12001

Black 11 Oz Hi Heat Coating

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders...

Product#: TT12002

Aluminum 11 Oz Hi Heat Coating

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders...

Product#: TT1054

Thermo-Tec® 2" x 15" x 1/16" Thick Graphite Black Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TT11032

2" x 50" Generation II Copper Header Wrap

Generation II Copper Header Wrap improves heat resistance up to 20% more than current technology by utilizing a new proprietary coating developed by Thermo-Tec's improved Thermal Conduction Technology (TCT™). Features:...

Product#: TT1051

2" x 50" Thermo Shield Tape

Thermo-Shield™ protects hoses and wires from radiant heat. Unprotected rubber hoses and plastic or rubber insulated wiring can dry out, melt or crack over time. Thermo-Shield™ is used in applications where it is...

Product#: TT12003

Copper 11 Oz Hi Heat Coating

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders...