Product#: 3919070

1967-72 Camaro, Firebird; Console Lid/Console Ashtray Lid Rubber Stopper; Each

Reproduction console lid and ash tray lid rubber stoppers for 1967-72 Camaro and Firebird models. Each stopper is manufactured to correct factory dimensions replicating the original for an authentic appearance and fit. These...

Product#: K922

1970-81 Camaro, Firebird, GM X-Body; Side Hood Rubber Stopper; Each

Correct reproduction of the original hood rubber stopper for use with 1970-81 Camaro & Firebird models. Each stopper is manufactured in quality EPDM rubber and features the correct configuration and design. Sold individually....

Product#: 4410574

Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each

Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.

Product#: A4447

1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models

Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...

Product#: 3973952

1958-84 GM; Outer Rear Hood Rubber Stoppers; Pair; Various Models

Reproduction outer rear hood bumpers for various GM models. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment. Sold in pairs. Use as required Buick...

Product#: 7712535

1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models

Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...

Product#: 152731

1968-81 Camaro, Impala, Firebird; Door Glass Guide Stop Bumpers; Pair; Various GM

Reproduction of the original door glass guide stop bumpers designed for use with various 1968-81 General Motors vehicles. These glass guide stops are required for proper door glass alignment. Commonly damaged during removal...

Product#: *K88066

1970-81 Chevrolet Camaro; Rubber Stopper Kit; 20 Piece Set

OER® reproduction of the original rubber stoppers and bumpers originally installed on all 1970-81 Camaro models. The rubber stopper set includes all the correct stoppers and rubber bumpers required for the driver's and...

Product#: FB1057C

1955-76 GM; Hood Adjusting Screw and Bumper; Stainless Steel ; 7/16" x 14

Custom replacement stainless steel hood adjuster designed for use on various GM models as listed below. Each screw comes with a rubber bumpe that matches the original 7/16" x 14 screw. Sold individually. {fitment}

Product#: FB1057B

1955-76 GM; Hood Adjusting Screw and Bumper; Stainless Steel ; 5/16" x 18

Custom replacement stainless steel hood adjuster designed for use on various GM models as listed below. Each screw comes with a rubber bumpe that matches the original 5/16" x 18 screw. Sold individually. {fitment}

Product#: FB1057A

Hood Adjusting Screw and Bumper; Stainless Steel ; 1/4" x 20

Custom replacement stainless steel hood adjuster designed for use on various GM models as listed below. Each screw comes with a rubber bumpe that matches the original 1/4" x 20 screw. Sold individually. {fitment}

Product#: 4767559

Trunk Compartment Rubber Bumper - 3/8" thick

Replacement bumper to eliminate the lid from touching the body and causing unnecessary damage. Dimensions: Body Diameter: 15/16" Body Height: 3/8" Mounting hole diameter: 3/16" Overall Height: 5/8" Sold individually; order...

Product#: K980

1961-79 GM; Bucket Seat Back Rubber Stopper Set; Round; w/Mounting Screws; Pair

Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...

Product#: K497

1970-81 Camaro / Firebird Locking Rod To Inner Panel Silencer, 2 Piece Set

Reproduction of the of the original door lock rod rubber silencer designed for use on all 1970-81 Camaro and Firebird models. This rubber piece attaches to the inner door and the lock rod unit passes thru this molded rubber...

Product#: 3868790

1955-1981 GM; Firewall Pad Fastener; Each

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Product#: 3820023

1962-81 GM; Glove Box Door Arm Rubber Bumper

OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...

Product#: 3698109

1951-75 Convertible Power Top Motor Mounting Grommet - Each

Reproduction of the original rubber mounting / insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a...

Product#: CS81

1969-81 GM; Fuel Door Rubber Bumper; Various Models; Each

Correct reproduction of the original fuel door rubber bumper designed for use on various 1965-81 GM models. Each bumper is designed to replicate the original. Manufactured in hard rubber material for long lasting use. 7/8"...

Product#: A4250

1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair

Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...

Product#: 3937590

1969-77 Camaro, 1973-74 X Body; Rear License Bracket Rubber Bumpers; 13/16" Tall; Pair

Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...