Product#: 154076

1970-81 Camaro, Firebird; Tubular Lower Control Arm Set; Pair

Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...

Product#: 9421430

1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each

OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...

Product#: 154075

1970-81 Camaro, Firebird; Tubular Upper Control Arm Set; Pair

Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...

Product#: 10068783

1970-96 GM Lower Control Arm Bumper, Each, Various Models

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...

Product#: SP97130

1970-81 Camaro/Firebird, 1973-77 Regal Front Adjustable Control Arms add Camber/Caster

SPC Front Upper Adjustable Control Arms design will give you the most adjustability and best clearance of any arm on the market. These adjustable arms come with ball joints that are 1/2? taller than stock to improve camber...

Product#: SP94340

1970-81 GM F-Body; 75-79 Nova, 73-96 Full Size - Adjustable Upper Control Arm

Adjustable upper control arm for 1970-96 Chevrolet and 1970-81 Pontiac models. This rugged control arm offers a wide range of adjustments to meet your exact needs. These arms provide quick and easy compensation for standard...

Product#: 13201A

1970-73 Upper Control Arm Shaft Set

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: GW705

70-81 F-Body, 1975-79 X-Body Billet Shaft, Offset with OE Arms

Offset shafts can take the place of stock shafts. They will allow caster to be added without losing proper camber settings. For performance alignments and/or the addition of tubular a-arms these are a must to achieve the...

Product#: SP94304

1970-81 GM F-body - Adjustable Control Arm Spacer Set

Adjustable control arm spacer sets for 1967-81 Camaro models. Ball Joint Spacers raise the arm to improve frame clearance. Three 1/4" spacers and hardware.

Product#: SP94378

1970-96 GM; Adjustable Lower Control Arms; Pair

These tubular lower control arms are a perfect fit for the various General Motors models listed including your 2nd Generation Camaro or Firebird models. On 1970-81 Camaro models, they add 2.5° positive caster and may be...

Product#: 11172199

1970-81 Camaro Firebird ; Control Arms; Stock Style; Front Lower

Tubular control arms add strength, style and improved performanceSelf-lubricating Delrin bushings reduce deflection and suspension bind Increased caster dramatically improves handling and controlAdjustable ride height to...

Product#: RK10021U

1970-81 Camaro / Firebird; Rekudo; Control Arms; Front; Upper

The Rekudo Upper control arms are one part of a fully engineered suspension system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern suspension system that retains...

Product#: RK10021L

1970-81 Camaro / Firebird; Rekudo; Control Arms; Front; Lower

The 1970-81 Camaro and Firebird Rekudo lower control arms are one part of a fully engineered suspension system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern...

Product#: 9442939

Lower Control Arm Nut

When replacing control arm bushings we recommend replacing the hardware too. Somewhat cosmetically different from the original, these zinc plated nuts are silver as opposed to the black phosphate finish of the original...

Product#: E7720203

1970-81 F-BODY Bolt-In Stock Spring Adapter for P/N E52420 Lower Control Arms

Bolt-in Adapter for stock springs for part number E52420 Lower control arms for 1970-81 Camaro models using factory springs instead of coil-overs. Include 2 Bolt-In Spring Adapters and hardware.

Product#: GW715

1970-81 F-Body, 1975-79 X-Body Billet Shaft Standard with OE or Tubular Arms

Standard non-offset shafts are highly recommended if you are using performance Del-A-Lum or polyurethane bushings. The shafts are made to accomidate 5/8" fine threaded locking nuts rather than a factory shaft that uses a 3/8"...

Product#: *R328

Lower Control Arm Nut Set

Product#: 12237

1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each

Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...

Product#: 12258

1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each

Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...

Product#: E52720

1970-81 Camaro/Firebird; 1977-96 Impala/Caprice; QA1 Street Tubular Lower Control Arms; LH and RH

These QA1 performance control arms designed for the street feature powder-coated tubular construction for increased strength and durability. Street arms include a replacement ball joint, polyurethane pivot bushings. Great for...

Product#: CTA71H

1970-81 Camaro / Firebird, 75-79 X-Body Tubular Lower Control Arms For Coilover Shocks

Global West's coil-over tubular lower arms allow QA-1, Afco, and Air Ride technology components to bolt directly on. We took a good look at the stock lower arm and the installation of a coil-over kit in place of the standard...

Product#: HS3021

1970-81 F-Body/1975-79 X-Body Heidts Tubular Upper Control Arms

Beef up your suspension and tighten your handling with these Heidts bolt-on tubular control arms that are state-of-the-art in both design and fabrication. The upper arms are 1-1/4" in diameter and include offset cross shafts...

Product#: CTA71A

1970-81 Camaro/Firebird, 1975-79 X-Body Tubular Upper Control Arms

A great performance upgrade for your front suspension. Provides increased straight line stability, reduced wander, and quicker cornering response. They're ideal for drag racing, autocross/road racing and performance street....

Product#: BX20061A

1970-81 Camaro / Firebird BMR Suspension Lower Control Arms with Red Powdercoat Finish

Enhance your handling performance with BMR Suspension control arms. Fabricated from heavy-duty 1.50", 0.095" wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength and come pre-assembled with low...

Product#: BX313404

1970-81 F-Body Control Arm Hardware Kit, Front Upper And Lower Control Arms

Each kit contains all the correct bolts, washers and nylon lock nuts used to mount the upper and lower control arms. Replaces rusted, burred, stripped, or otherwise damaged originals. Excellent for use when replacing control...

Product#: HS3123

1970-81 F-Body/1975-79 X-Body Tubular Lower Control Arms (For Use With Coilover Shocks)

Beef up your suspension and tighten your handling with these Heidts bolt-on tubular control arms that are state-of-the-art in both design and fabrication. These stock width 1-1/2" diameter tube lower control arms come...

Product#: CTA71L

1970-81 Camaro / Firebird, 1975-79 X-Body Tubular Lower Control Arms with Coil Springs Pockets

Global West Suspension tubular lower arms are perfect for stock or performance suspension upgrades. These control arms provide additional header tube clearance, which requires no frame modifications and are assembled for your...

Product#: E52518

1970-81Camaro/Firebird; 1971-96 Impala/Caprice; 1975-79 Nova; QA1 Pro Touring Tubular Upper Control Arms; LH and RH

These QA1 Pro Touring upper control arms provide the added performance needed for drag racing, pro touring, and intense street applications. Pro Touring arms include a low friction ball joint, Delrin pivot bushings and...

Product#: E52718

1970-81 Camaro / Firebird; 1973-77 Buick Regal QA1 Street Tubular Upper Control Arms

These QA1 performance control arms designed for the street feature powder-coated tubular construction for increased strength and durability. Street arms include a replacement ball joint, polyurethane pivot bushings and...

Product#: BX20061B

1970-81 Camaro / Firebird BMR Suspension Lower Control Arms with Black Hammertone Finish

Enhance your handling performance with BMR Suspension control arms. Fabricated from heavy-duty 1.50", 0.095" wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength and come pre-assembled with low...

Product#: BX20060A

1970-81 Camaro / Firebird BMR Suspension Upper Control Arms with Red Powdercoat Finish

Enhance your handling performance with BMR Suspension control arms. Fabricated from heavy-duty 1.25", 0.095" wall DOM tubing with DOM cross braces for extra strength and are equipped with CNC machined, nickel-plated,...

Product#: BX20060B

1970-81 Camaro / Firebird BMR Suspension Upper Control Arms with Black Hammertone Finish

Enhance your handling performance with BMR Suspension control arms. Fabricated from heavy-duty 1.25", 0.095" wall DOM tubing with DOM cross braces for extra strength and are equipped with CNC machined, nickel-plated,...

Product#: 1362014

1970-87 Buick, Chevrolet, Olds, Pontiac; Upper Control Arm Bumper; Various Models; Each

Reproduction control arm bumper for Buick, Chevrolet, Oldsmobile, and Pontiac models. This upper control arm bumper is designed to replicate the factory original and is essential for proper suspension travel and ride control....