Product#: 10268

1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 154076

1970-81 Camaro, Firebird; Tubular Lower Control Arm Set; Pair

Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...

Product#: *K45330A

1970 Camaro; Front End Rebuild Kit; With Outer Tie Rod Ends Only

Nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Be sure you install what the...

Product#: 9421430

1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each

OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...

Product#: 154632

Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...

Product#: A8500200

1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set

This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...

Product#: *K45330B

1970 Camaro; Front End Rebuild Kit; With Inner and Outer Tie Rod Ends

Nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Be sure you install what the...

Product#: 154075

1970-81 Camaro, Firebird; Tubular Upper Control Arm Set; Pair

Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...

Product#: 10277

1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...

Product#: 10068783

1970-96 GM Lower Control Arm Bumper, Each, Various Models

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...

Product#: 154633

1964-70 Mustang, 1967-70 Cougar; Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...

Product#: 104113

1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: AM708110

1970-81 Camaro Big Block with TH350, TH400, Powerglide or Richmond 4 Speed Art Morrison Subframe

Art Morrison's GT-Sport chassis is a bolt in subframe that include specifically tuned suspension using C6 spindles with lowered steering arm mounts. The 20:1 power rack & pinion steering unit is mounted 2" lower in the frame,...

Product#: AM708112

1970-81 Camaro Big Block with Tremec T56 Transmission Art Morrison Subframe

Art Morrison's GT-Sport chassis is a bolt in subframe that include specifically tuned suspension using C6 spindles with lowered steering arm mounts. The 20:1 power rack & pinion steering unit is mounted 2" lower in the frame,...

Product#: AM708104

1970-81 Camaro Small Block with TH350, TH400, Powerglide or Richmond 4 Speed Art Morrison Subframe

Art Morrison's GT-Sport chassis is a bolt in subframe that include specifically tuned suspension using C6 spindles with lowered steering arm mounts. The 20:1 power rack & pinion steering unit is mounted 2" lower in the frame,...

Product#: AM708105

1970-81 Camaro C6 Subframe - 20:1 Rack - 550Lb Coilovers - 700R4

Art Morrison Enterprises C6 subframe - for use in small block or LS engine applications. Destined to become one of the most popular bolt-in chassis modifications of all time, Morrison's new GT-Sport Front Clip is a ?must...

Product#: AM708106

1970-81 Camaro C6 Subframe - 20:1 Rack - 550Lb Coilovers - T56

Art Morrison Enterprises C6 subframe - for use in small block or LS engine applications. Destined to become one of the most popular bolt-in chassis modifications of all time, Morrison's new GT-Sport Front Clip is a ?must...

Product#: D303141

1970-81 F-Body; Detroit Speed; Front Coilover Conversion Kit; Single Adjustable Shocks; BBC

The Detroit Speed coilover kit is designed to convert your stock front subframe to a coilover shock and spring suspension system. This kit allows the latest in coilover spring/shock technology to be bolted into any F-Body...

Product#: SP97130

1970-81 Camaro/Firebird, 1973-77 Regal Front Adjustable Control Arms add Camber/Caster

SPC Front Upper Adjustable Control Arms design will give you the most adjustability and best clearance of any arm on the market. These adjustable arms come with ball joints that are 1/2? taller than stock to improve camber...

Product#: 154630

1970-81 Camaro; Firebird; Tubular Control Arm Set; Upper and Lower; Black Powder Coated

Enhance the handling and performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arms, they also feature improved suspension...

Product#: DB7078

1970-78 Camaro Drop Spindle Disc Brake Kit 2" Drop

Lower your classic 2" and upgrade to disc brakes with our drop spindle wheel kit. The drop spindles will lower your car 2" and have no effect on the suspension geometry or travel. Kit includes: 2" drop spindles Rotors Loaded...

Product#: TCA7081L

1970-81 Camaro/Firebird, 1973-77 GM A-Body, 1975-79 GM X-Body, 1977-96 GM B-Body; Lower Tubular Control Arm Set; Black Powdercoat

Take your front suspension to the next level with these Totally Tubular™ control arms from Classic Performance Products! The lower arms feature helical stamped mounts welded around the entire perimeter to 1-1/2" 120 DOM...

Product#: RK60002

1970-1981 Camaro / Firebird; 1" Spindle Drop and 1" Taller for Improved Camber Curve

Rekudo spindles are one part of a fully engineered suspension and brake system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern suspension system that retains the...

Product#: SP94340

1970-81 GM F-Body; 75-79 Nova, 73-96 Full Size - Adjustable Upper Control Arm

Adjustable upper control arm for 1970-96 Chevrolet and 1970-81 Pontiac models. This rugged control arm offers a wide range of adjustments to meet your exact needs. These arms provide quick and easy compensation for standard...

Product#: M2DS

CPP; Mustang II, 1975-80 Pinto / Bobcat; 2" Drop Spindles

CPP's Mustang II drop spindles are built from forged steel and heat treated for superior strength. Designed to drop the front end approximately 2" lower than stock while maintaining stock geometry. Will fit 1974-78 Ford...

Product#: 33102G

1970-72 Camaro / Firebird Black Polyurethane Front End Bushing Set

Each polyurethane bushing set includes the bushings with outer metal shells for strength and durability. Manufactured to factory specifications, each set will add an incredibly solid feel to your suspension. Polyurethane...

Product#: 33102R

1970-72 Camaro / Firebird Red Polyurethane Front End Bushing Set

Each polyurethane bushing set includes the bushings with outer metal shells for strength and durability. Manufactured to exact factory specifications, each set will add an incredibly solid feel to your suspension....

Product#: K6656

1967-69 F-Body, 1968-72 Nova Splash Flaps for Chassisworks Front Frame Clip

Control arm splash flap for use with Chassisworks front frame clips. Made in USA Note: No further discount s apply.

Product#: 13201A

1970-73 Upper Control Arm Shaft Set

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: GW705

70-81 F-Body, 1975-79 X-Body Billet Shaft, Offset with OE Arms

Offset shafts can take the place of stock shafts. They will allow caster to be added without losing proper camber settings. For performance alignments and/or the addition of tubular a-arms these are a must to achieve the...

Product#: SP94304

1970-81 GM F-body - Adjustable Control Arm Spacer Set

Adjustable control arm spacer sets for 1967-81 Camaro models. Ball Joint Spacers raise the arm to improve frame clearance. Three 1/4" spacers and hardware.

Product#: 1256640

1963-87 Various GM Models; Upper Ball Joint Rivet Set; 6 Piece Set

Reproductions of the original rivets used to hold the ball joints into the control arm. Unlike the bolts used to hold current replacement units in place, these will offer an original appearance. {specs} {fitment}

Product#: 913128R

1970-81 F-Body; 78-87 Regal - Ball Joint Boot Set - Red

Polyurethane ball joint boots from Energy Suspension. Designed to never wear out as conventional boots do. Replace your original ball joint boots with these new polyurethane style boots. Set includes 2 upper boots and 2 lower...

Product#: AM708111

1970-81 Camaro Big Block with 700-R4 Transmission Art Morrison Subframe

Art Morrison's GT-Sport chassis is a bolt in subframe that include specifically tuned suspension using C6 spindles with lowered steering arm mounts. The 20:1 power rack & pinion steering unit is mounted 2" lower in the frame,...

Product#: D303132

1970-81 F-Body; Detroit Speed; Front Coilover Conversion Kit; Double Adjustable Shocks; SBC/LS

The Detroit Speed coilover kit is designed to convert your stock front subframe to a coilover shock and spring suspension system. This kit allows the latest in coilover spring/shock technology to be bolted into any F-Body...

Product#: D303142

1970-81 F-Body; Detroit Speed; Front Coilover Conversion Kit; Double Adjustable Shocks; BBC

The Detroit Speed coilover kit is designed to convert your stock front subframe to a coilover shock and spring suspension system. This kit allows the latest in coilover spring/shock technology to be bolted into any F-Body...

Product#: D303140

1970-81 F-Body; Detroit Speed; Front Coilover Conversion Kit; Base Shocks; BBC

The Detroit Speed coilover kit is designed to convert your stock front subframe to a coilover shock and spring suspension system. This kit allows the latest in coilover spring/shock technology to be bolted into any F-Body...

Product#: SP94378

1970-96 GM; Adjustable Lower Control Arms; Pair

These tubular lower control arms are a perfect fit for the various General Motors models listed including your 2nd Generation Camaro or Firebird models. On 1970-81 Camaro models, they add 2.5° positive caster and may be...

Product#: TCA7081B

1970-81 Camaro/Firebird; Upper & Lower Tubular Control Arm Set; Black Powdercoat

Take your front suspension to the next level with these Totally Tubular™ control arms from Classic Performance Products! The lower arms feature helical stamped mounts welded around the entire perimeter to 1-1/2" 120 DOM...

Product#: D031204

1970-81 Camaro, Firebird; Detroit Speed; Tubular Lower Control Arms; With Stock Spring Pocket

Improve your suspension geometry with Detroit Speed's tubular control arms. These tubular lower control arms are shipped complete with lower ball joints, steering stops, and are ready to install on your car. Features include...

Product#: 11172199

1970-81 Camaro Firebird ; Control Arms; Stock Style; Front Lower

Tubular control arms add strength, style and improved performanceSelf-lubricating Delrin bushings reduce deflection and suspension bind Increased caster dramatically improves handling and controlAdjustable ride height to...

Product#: D030102

1970-81 Camaro, Firebird; Detroit Speed; Upper Tubular Control Arms

Improve your suspension geometry with Detroit Speed's robust tubular control arms, featuring Delrin bushings and a durable black powder coat finish. Designed to increase camber gain and improve roll camber. Features...

Product#: RK10021U

1970-81 Camaro / Firebird; Rekudo; Control Arms; Front; Upper

The Rekudo Upper control arms are one part of a fully engineered suspension system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern suspension system that retains...

Product#: RK10021L

1970-81 Camaro / Firebird; Rekudo; Control Arms; Front; Lower

The 1970-81 Camaro and Firebird Rekudo lower control arms are one part of a fully engineered suspension system for the 1970-1981 Chevrolet Camaro & Pontiac Firebird. This suspension system is an auto-cross inspired modern...

Product#: CP30014

1970-81 C5 Stock Height Spindles

These bolt on spindles use C5 bearing hubs with sealed bearing packs to eliminate spindle pin flex. The design maintains the drum brake offset while improving geometry to allow better camber change during suspension movement....

Product#: 7078DS

1970-78 2" Machined Drop Spindle

Lower your car 2" without affecting steering or suspension geometry. Spindles are cast from the highest quality Ductile Iron with CNC machined 4130 Chrome-moly pins. Attaches to stock ball joints and tie rod ends. Moves...

Product#: A9500403

1970-78 Camaro; Stock Height Spindles

Reproduction OE-style stock height disc brake spindles for 1970-78 Chevrolet Camaro models. They are manufactured with modern steel alloys for improved durability and strength over the original spindles. These high quality...

Product#: 8488

Cotter Pin 1/8 X 1-1/-2"

This cotter pin is used to keep the front spindle nut in place. Sold individually.

Product#: 9442939

Lower Control Arm Nut

When replacing control arm bushings we recommend replacing the hardware too. Somewhat cosmetically different from the original, these zinc plated nuts are silver as opposed to the black phosphate finish of the original...

Product#: 1365236

1946-96Spindle Nut 3/4-20 Hex

3/4"-20 with 1-1/16" hex head spindle nut for securing drum or rotor to spindle. Sold individually. 2 required per vehicle. Popular Applications: 1967-90 Camaro front spindle 1967-90 Firebird front spindle 1964-79 Chevy II /...

Product#: E7720203

1970-81 F-BODY Bolt-In Stock Spring Adapter for P/N E52420 Lower Control Arms

Bolt-in Adapter for stock springs for part number E52420 Lower control arms for 1970-81 Camaro models using factory springs instead of coil-overs. Include 2 Bolt-In Spring Adapters and hardware.

Product#: SP94017

1970-92 Chevrolet, Pontiac; Upper Ball Joint; Extended Length

Extended length OEM-style ball joint for 1970-92 GM models. These original-style greaseable ball joints feature extended length for improved camber gain and increased control arm to frame clearance. {fitment}

Product#: GW715

1970-81 F-Body, 1975-79 X-Body Billet Shaft Standard with OE or Tubular Arms

Standard non-offset shafts are highly recommended if you are using performance Del-A-Lum or polyurethane bushings. The shafts are made to accomidate 5/8" fine threaded locking nuts rather than a factory shaft that uses a 3/8"...

Product#: G5139K

1970-79 Camaro; Firebird; Front Suspension Castle Nut Set; 20 Pieces

Reproduction steering linkage and ball joint castle nut set for 1970-79 Camaro/Firebird models. This high quality castle nut includes (4) 1/2-20 nuts, (4) 7/16-20 nuts, (2) 9/16-18 nuts, (4) 3/32 x 1" cotter pins and (6) 1/8...

Product#: K6108

1964-73 Buick, Chevrolet, GMC, Oldsmobile, Pontiac; Upper Control Arm Bushings

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: 913128G

1970-81 GM F-Body; 78-87 Regal - Ball Joint Boot Set - Black

Polyurethane ball joint boots from Energy Suspension. Designed to never wear out as conventional boots do. Replace your original ball joint boots with these new polyurethane style boots. Set includes 2 upper boots and 2 lower...

Product#: *R328

Lower Control Arm Nut Set

Product#: 12237

1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each

Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...

Product#: 12258

1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each

Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...