Product#: T4786

1955-87 GM Cars / Trucks Chrome 10-Bolt Rear End Differential Cover

This replacement rear end cover is manufactured with bright, triple chrome plating and is designed to resemble the configuration of the original cover. This high-quality rear end cover will add a unique, custom appearance to...

Product#: SU9930Z

1968-79 Various GM applications Including Chevelle, Camaro, Cutlass; Rear End/Differential; Yoke Kit

This is the bolt and strap style yoke and includes bolts and straps. This yoke replaces GM # 3879208 and uses the 1330 U joint. Fits various 68-79 GM application including Chevelle, Cutlass and Camaro models with 12 bol...

Product#: SU3806T

1965-72 Various GM Vehicles Including Chevelle, Skylark, GTO; Rear End/Differential Cover; Aluminum W27; 12 Bolt; C Clip Style

New reproduction aluminum W27 12 bolt differential cover. These covers are made in the USA. It fits various 1965-72 GM vehicles including GTO, Chevelle, Skylark, rear ends with 12 bolt pattern. Fits all hardtop and...

Product#: CE932A

Currie Complete Ford 9-Inch 3rd Member; 31-Spline; with Currie TwinTrac Helical-Gear Style Limited-Slip Differential; (3.00 Ratio)

Currie complete Ford 9-inch third members, make it easy to update your muscle car, sport truck, street rod, or race vehicle with a new gear ratio or carrier. Every Currie Ford 9-inch third member includes: a new nodular iron...

Product#: UR822838

Yukon Dura Grip Positraction 8.2" 28 Spline 3.08 And Up Ratios

Yukon Dura Grip® Positraction unit is based on the race-proven four-spring clutch-style design that has been used by GM for years. Assembled with heavy-duty 4320 Chrome-Moly spider gears and composite clutches for reduced...

Product#: UR8753090

Yukon Dura Grip Positraction 8.5" 30 Spline 3.08-3.90 Ratios

Yukon Dura Grip® Positraction unit is based on the race-proven four-spring clutch-style design that has been used by GM for years. Assembled with heavy-duty 4320 Chrome-Moly spider gears and composite clutches for reduced...

Product#: 545008

1964-72 GM Car 8-7/8" 12-Bolt, 10-Bolt; Auburn Gear Select-A-Loc Electric Differential; LSD to Lock; 30 Spline; "C" axle, 3 Series Case

The Select-A-Loc LSD to Lock model locks the axle shafts to the diff housing to transfer torque directly from the case, not through the gears. This electronically-actuated differential operates as a limited slip differential...

Product#: 545010

1964-72 GM Car 8-7/8" 12-Bolt, 10-Bolt; Auburn Gear Select-A-Loc Electric Differential; LSD to Lock; 30 Spline; "C" axle, 4 Series Case

The Select-A-Loc LSD to Lock model locks the axle shafts to the diff housing to transfer torque directly from the case, not through the gears. This electronically-actuated differential operates as a limited slip differential...

Product#: 5460117

1965-72 Chevrolet 8-7/8" 12-Bolt; Auburn Gear Grip-N-Loc Differential; 33 Spline; 4.10:1 & Up, 30 Spline; "C" axle, 4 Series Case

Grip-N-Loc, Auburn Gear's most advanced limited slip differential. The Grip-N-Loc builds upon exclusive technologies previously found in Auburn's limited slip line, but is even more robust to satisfy the extreme demands of...

Product#: LS231230

Powertrax; GRIP LS; GM 12 Bolt Limited Slip Differential; 8.875" Ring Gear; 30 Spline Axle; For Carriers With 3.90 Gear & Down

The Powertrax Grip LS, is a clutch type differential in a forged steel case. This differential uses a set of carbon clutch discs to provide traction as needed, is rebuild-able and serviceable, and aimed squarely at the street...

Product#: 546099

1964-71 Buick, Oldsmobile, Pontiac 8.2" 10-Bolt; Auburn Gear Grip-N-Loc Differential; 28 Spline; 2.93-3.23 Ratios

Grip-N-Loc, Auburn Gear's most advanced limited slip differential. The Grip-N-Loc builds upon exclusive technologies previously found in Auburn's limited slip line, but is even more robust to satisfy the extreme demands of...

Product#: 546031

1965-72 GM Car 8-7/8" 12-Bolt; Auburn Gear Grip-N-Loc Differential; 30 Spline; 4.10:1 & Up, 30 Spline; "C" axle, 4 Series Case

Grip-N-Loc, Auburn Gear's most advanced limited slip differential. The Grip-N-Loc builds upon exclusive technologies previously found in Auburn's limited slip line, but is even more robust to satisfy the extreme demands of...

Product#: *GM10273MKT

GM 10 Bolt 8.5" 2.73 Ring & Pinion Master Set W/Timken Bearings (1.626" Pinion Diameter, 30 Spline)

Replace your worn out or broken ring and pinion gears with new components from Motive Gear. Includes matched ring and pinion gears, pinion bearings, seal, crush sleeve and nut, carrier bearings, shim kit, ring gear bolts,gear...

Product#: 546060

1964-71 Buick, Oldsmobile, Pontiac 8.2" 10-Bolt; Auburn Gear Grip-N-Loc Differential; 28 Spline; 3.36:1 & Up

Grip-N-Loc, Auburn Gear's most advanced limited slip differential. The Grip-N-Loc builds upon exclusive technologies previously found in Auburn's limited slip line, but is even more robust to satisfy the extreme demands of...

Product#: *G888373MK

GM 12 Bolt 8.875" 3.73 Ring & Pinion Master Set (1.625" Pinion Diameter, 30 Spline)

Replace your worn out or broken ring and pinion gears with new components from Motive Gear®. Master sets includes: Ring and Pinion gears Pinion Bearings Seal, Crush Sleeve and Nut Carrier Bearings Shim Kit Ring Gear Bolts...

Product#: *G888342MK

GM 12 Bolt 8.875" 3.42 Ring&Pinion Master Set

Replace your worn out or broken ring and pinion gears with new components from Motive Gear®. Master sets includes: Ring and Pinion gears Pinion Bearings Seal, Crush Sleeve and Nut Carrier Bearings Shim Kit Ring Gar Bolts...

Product#: G882373

8.2 Ring And Pinion - 3.73 Gear Ratio

Product#: UR12884

1963-87 Truck 12 Bolt 8.875" Differential Master Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1963-87 1/2 ton Truck models. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and...

Product#: A9800121

B&M; Hi-Tek Aluminum Differential Cover; 1955-57, 1962-81 GM Cars With 8.2" Or 8.5" Ring Gear; 10-Bolt

B&M cast aluminum rear end cover was designed to strengthen the rear end by preventing case distortion. Constructed of A356.0-T6 aluminum, this rugged unit also dissipates heat much faster than the stock factory unit to...

Product#: UR12882

1964-72 12 Bolt 8.875" Differential Master Bearing Set With Timken Bearings

This set is designed to replace the differential bearings on 1967-72 Camaro models. Master bearing set includes bearings and races, gasket (or RTV silicone), washers, nuts and ring gear bolts for a complete replacement.

Product#: RP8888373

1965-72 GM 12 Bolt 8-7/8" 3.73 Ratio Ring and Pinion

Includes 12 bolt, 8 7/8" ring gear and pinion includes ring and pinion only (not a kit). For a complete assembly also purchase 12 bolt ring and pinion shim kit, 12 bolt bearing kit and 12 bolt installation kit. Important:...

Product#: G885373

GM 10 Bolt 8.5" 3.73 Ring & Pinion Set

Rear End Type: 10-Bolt Ring Gear Diameter: 8.5" & 8.625" Ratio: 3.73:1 Material: 8620 Mfg #: G885373 Pinion: 30 Spline Pro/Street Motive Gear Line

Product#: UR10821

1964-72 10 Bolt 8.2" Differential Basic Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1967-70 Camaro models. Basic bearing set includes bearings and races, gasket (or RTV silicone), washers, and nuts for a complete replacement.

Product#: UR12881

1964-72 12 Bolt 8.875" Differential Basic Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1967-72 Camaro models. Basic bearing set includes bearings and races, gasket (or RTV silicone), washers, and nuts for a complete replacement.

Product#: 141696-BCHW

GM 8.2, 8.5 10 Bolt; Rear End Cover, Chevy Bowtie Emblem

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...

Product#: 141697-BCHW

Chevy Bowtie Emblem Rear End Cover, Gm, 12 Bolt, Passenger Car

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...

Product#: UR10823

1965-72 10 Bolt 8.2" Differential Super Master Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1967-70 Camaro models. Super master bearing set includes differential bearings and races, gasket (or RTV silicone), washers, nuts, ring gear bolts, rear axle...

Product#: UR10853

1970-96 10 Bolt 8.5" Differential Super Master Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1970-81 Camaro models. Super master bearing set includes differential bearings and races, gasket (or RTV silicone), washers, nuts, ring gear bolts, rear axle...

Product#: LW18000

Lakewood; Universal; Zinc Plated Drive Shaft Safety Loop

Required and approved by all major racing sanctioning bodies this universal driveshaft safety loop is fully adjustable to fit most vehicles. The four piece design is manufactured from 1/4" thick, 2" wide mild steel, bright...

Product#: AK125B

GM 10 Bolt Rear End Cover Bolt Set; Polished Stainless Steel

Original style Hex head polished stainless steel bolts. These bolts are very high quality reproductions in dazzling bright finish. Made in USA {fitment}

Product#: T4787

1955-81 GM Car/Truck; Chrome Rear Differential Cover; 12-Bolt

This chrome rear end cover is produced in bright triple chrome plating and resemble the configuration of the original covers. Your classic will look great with this high quality cover. {specs} {fitment}

Product#: M7126B

GM 12 Bolt Rear End Cover; Chevy 12-Bolt; Semi Gloss Black

Dress up your 12 Bolt or Dana rear end with our Semi-Gloss Black Powder Coated cover. Available for Chevy 12 Bolt car and Dana 60 rear ends.

Product#: G6045

1965-81 Axle Shaft Lock/C-Clip (.150)

Original replacement locks for applications below. Fits 1967-81 with.150 horseshoe.

Product#: AK125A

GM 10 Bolt Rear End Cover Bolt Set; Chrome

Original style Hex head chrome bolts. These bolts are very high quality reproductions in dazzling chrome finish. Made in USA {fitment}

Product#: KW577

1967-81 Camaro, Firebird, Impala, Nova; 12 Bolt Rear Differential Cover; OE Style Raw Steel

Reproduction of the original style 12 bolt differential cover designed for use with various 1967-81 GM models including Camaro, Firebird, Impala, Nova, Ventira, Omega, Skylark, and Apollo models as listed. Each cover is...

Product#: W507

1965-89 GM Rear Axle Bearing

Prevent costly damage by replacing rear axle bearings before they seize with this premium replacement rear axle bearing. Always check the bearings and seals whenever removing the rear drums/axle for signs of wear. Sold...

Product#: W1563

1965-02 Rear Axle Repair Bearing

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...

Product#: M28259

Moser 7/16" - 20 X 1-3/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with disc brakes. These are a great addition when installing Moser axles on your vehicle or just replacing your old wheel studs. Sold as a set of 10. One...

Product#: 56459CE

Chrome Hex Head 12 Bolt Differential Cover Bolt Set with SS Logo (5/16"-18 X 1/2")

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: 56459CC

Chrome Hex Head 12 Bolt Differential Cover Bolt Set with Flames Logo (5/16"-18 X 1/2")

This dress-up differential cover bolt set features a flame logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: 56476SD

Stainless Steel 12 Bolt Differential Cover Hex Head Bolt Set with Bow Tie Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a Bow Tie logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

Product#: 56458CD

Chrome Hex Head 10 Bolt Differential Cover Bolt Set with Bow Tie Logo (5/16"-18 X 1/2")

This dress-up differential cover bolt set features a Bow Tie logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

Product#: 56475CE

10 Bolt Differential Cover Chrome Hex Head Bolt Set with SS Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: 56476SE

Stainless Steel 12 Bolt Differential Cover Hex Head Bolt Set with SS Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: 56475CC

10 Bolt Differential Cover Chrome Hex Head Bolt Set with Flames Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a flame logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: 56458CG

Chrome Hex Head 10 Bolt Differential Cover Bolt Set with 350 Logo (5/16"-18 X 1/2")

This dress-up differential cover bolt set features a 350 logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: 56458CF

Chrome Hex Head 10 Bolt Differential Cover Bolt Set with RS Logo (5/16"-18 X 1/2" Bolts)

This dress-up differential cover bolt set features a RS logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: M28060

Moser 7/16" - 20 X 1-1/4" Thread 0.480" Knurl press-In Stud; RH

These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. Note:...

Product#: 56475SD

Stainless Steel 10 Bolt Defferential Cover Hex Head Bolt Set with Bow Tie Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a Bow Tie logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

Product#: 56476SF

Stainless Steel 12 Bolt Differential Cover Hex Head Bolt Set with RS Logo (5/16"-18 X 3/4 " Bolts)

This dress-up differential cover bolt set features a RS logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: G7171

Ring Gear Crush Sleeves 10 Bolt 8.5"

A crush sleeve is designed to prevent your pinion bearings from being preloaded too tightly and prevent the pinion nut from loosening up. Fits models with 10 bolt / 8.5" ring gear. Applications: Buick models: 1973-75 Apollo...

Product#: G7172

Ring Gear Crush Sleeves 12 Bolt 8-7/8"

A crush sleeve is designed to prevent your pinion bearings from being preloaded too tightly and prevent the pinion nut from loosening up. Fits models with 12 bolt / 8-7/8" ring gear. Applications: 1964-72 Chevrolet Chevelle...

Product#: 56475SG

Stainless Steel 10 Bolt Defferential Cover Hex Head Bolt Set with 350 Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a 350 logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: 56475SF

Stainless Steel 10 Bolt Defferential Cover Hex Head Bolt Set with RS Logo (5/16"-18 X 3/4 " Bolts)

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Product#: G5007K

1967-81 Camaro; Rear Axle Retainer Plate Hardware Set; Black Phosphate; 24 Pieces

Reproduction rear axle retainer plate mounting hardware set for 1967-81 Camaro models. This high quality hardware set features the correct size original style fasteners with the correct finish and headmarks. Rest assured you...

Product#: AM404020

Differential Housing Breather Vent

Eliminate those pesky leaks that 9" Ford housings are known for. This breather vent for hose is for use with the breather tank (sold separately). Made in USA Note: Special order, must be prepaid. Non-returnable....

Product#: R8460N

1963-81 Chevrolet, Pontiac, Buick; GM 12-Bolt Rear Axle; Differential Pinion Front Seal

Rear End Pinion Front Seal for 1963-81 GM car and truck models including Camaro, Firebird, Corvette and Truck. This seal features a precision sealing design to prevent lubricant escape and stop harmful contaminants from...

Product#: G9194

1964-2018 GM/GMC Side Pinion Thrust Washer

This is a differential side gear thrust washer. It's a genuine General Motors replacement part. The corresponding GM part number is 3984818. The steel component weighs one ounce and ships via UPS. Applications: 1973-1975...

Product#: M12164

1970-81 F-Body Moser 12 Bolt Housing and Axle Package with C-Clip 30 Spline Axles

If you're not looking for a complete 12 Bolt and feel like tackling your own differential setup, try this housing and axle package. Package includes: All new Moser cast nodular 12-bolt housing Heavy duty 1/2" bearing ca p...

Product#: A9592312

1970-81 Camaro & Firebird - Currie 9" Housing and Axle Kit

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...