Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: 153158

1970-73 Camaro, Firebird; Fuel Tank Sending Unit; 3/8" Line with 1/4" Return Line

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how much fuel...

Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...

Product#: 14987

1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve

Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...

Product#: K915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...

Product#: K561

1967-72 Camaro, Firbeird, Nova; Fuel Tank Strap Mounting Bolt Kit ; 10 Piece Set ; Various Models

Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...

Product#: 6428800

1970-73 Camaro, Firebird; Fuel Tank Sending Unit; Single Line; 3/8"; 6 cyl, 307ci, 350ci

Reproduction of the original fuel tank sending unit designed for use with 1970-73 Camaro and Firebird models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can...

Product#: T76063

Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap

Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...

Product#: FT1101A

1970-73 Camaro, Firebird; Fuel Tank Mounting Straps; Pair EDP

Reproduction fuel tank mounting straps that fit all 1970-73 Camaro and Firebird models. These OE-style straps are manufactured from heavy-duty, pre-formed zinc-plated steel to match the original in quality, design, and...

Product#: FT1101B

1970-73 Camaro, Firebird; Fuel Tank Mounting Straps; Stainless Steel; Pair

Reproduction of the original style fuel tank mounting straps designed for use with 1970-73 Camaro and Firebird models. Each strap is manufactured in quality stainless steel to original factory dimensions replicating the...

Product#: TK0120

Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: TK0121

Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: 153350

Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each

Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...

Product#: 265385

EFI Fuel Return Adapter Set

When converting a carbureted vehicle to an EFI system that requires a fuel return system, there's no longer any need to buy an expensive fuel tank. This adapter creates a return system simply by cutting a 2-3/4" section out...

Product#: TK0122

Fuel Tank Sending Unit; 5 Hole; "Universal" 10-180 Ohm; For VDO Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: FTA45111

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit; -6AN to 1/4 in. NPT

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...

Product#: AM9109

Autometer; Universal; Fuel Signal Adaptor for Autometer Gauges;

The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy...

Product#: 19161

Holley Sniper EFI; Fuel Tank Sending Unit; 0-90 Ohms

Sniper EFI fuel gauge senders are a big help during your installation. They can be used as a replacement for your existing unit. Or if you decide to upgrade your dash to aftermarket gauges, we have a sending unit with the...

Product#: FTA45113

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...

Product#: M265

Aluminum Flip Top Fuel Cap Gasket; Universal

Rubber gasket for use with our custom aluminum flip top gas cap. Measures 5-1/8" OD, 3-1/4" ID. Six bolt pattern, 4-1/2" center to center. {fitment}

Product#: 161853B

1949-88 GM Vehicles; Camaro; Nova; Impala; Regal; GTO; Firebird; Gas Tank Strap Liners; Original Material Design; Pair

Reproduction gas tank mounting strap liners for various 1949-88 GM models requiring liners. Designed to factory specifications and manufactured using an original style die-cut medium weight asphalt saturated paper liner...

Product#: 567PL

1/4"-18 Hex Head Drain Plug;

Replacement hex head drain plug is 1/4"-18 thread.

Product#: 566PL

1/8"-27 Hex Head Plug

Replacement drain plug is 1/8" PT - 27 thread.

Product#: C2480

1970-73 Camaro, Firebird; Fuel Tank Brace Set; 4 Piece Set; EDP Coated

Reproduction of the original fuel tank brace set designed for use with 1970-73 Camaro and Firebird models. Each fuel tank brace is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: E388

Fuel Tank Sending Unit Gasket

Correct replacement gasket which is used between the sending unit and the locking ring. We recommend replacing the gasket any time the sending unit has been removed. Fits: 1967-90 models except wagon

Product#: A2369

#10 x 1/2" Lg Tapping Screw with 5/16" Hex Washer Head; Zinc

Product#: K405

1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube

Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....

Product#: K404

Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube

Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...

Product#: 153349

Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each

Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...

Product#: AM3262

Auto Meter Universal Fuel Tank Sending Unit; 240 Ohms Empty, 33 Ohms Full

This is a universal 5-bolt fuel sending unit for use with Auto Meter universal fuel gauges. This unit is not included with the gauges packages and must be purchased separately. It is used with gauges that require 240 ohms...

Product#: CS81

1969-81 GM; Fuel Door Rubber Bumper; Various Models; Each

Correct reproduction of the original fuel door rubber bumper designed for use on various 1965-81 GM models. Each bumper is designed to replicate the original. Manufactured in hard rubber material for long lasting use. 7/8"...

Product#: E387

Fuel Tank Sending Unit Lock Ring

Correct replacement of the original locking ring which secures the fuel tank sending unit to the gas tank. This locking ring replaces the original which are commonly destroyed when they are being removed. This ring helps to...

Product#: G7001

1982-2004 Sending Unit Lock Ring

Correct original GM locking ring which connects the fuel tank sending unit to the gas tank. This locking ring replaces the original which are commonly destroyed when they are being removed. This ring helps to seal the sending...

Product#: FT5030

1967-2000 GM; Fuel Sender Unit Lock Ring and Rubber Gasket; 2 Piece Set; Except Station Wagon Models

Reproduction of the original style fuel sending unit lock ring and gasket for use with various 1967-2000 Buick, Chevrolet, Pontiac, and Oldsmobile models. Install the sending unit on your vehicle with a new sending unit lock...

Product#: CX2140

Universal Flush Mount Fuel Filler Kit

This universal flush mount fuel filler kit can be used on any applications. The polished stainless steel filler is ideal for fuel tank conversion. Features a tethered cap, cap key, and 3 mounting holes for an easy...