Product#: *R5008

1969-74 GM Pedal Pad Kit Manual Transmission; Without Disc Brakes Emblem - 8 Piece

Reproduction of the original pedal pads designed for 1969-74 Nova, 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes...

Product#: *38353

1969-74 GM Pedal Pad Kit Manual Transmission; Without Disc Brakes Emblem - 4 Piece

Reproduction of the original pedal pads designed for 1969-74 Nova, 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes...

Product#: *38333

1968-81 GM Pedal Pad Kit; Auto Trans; 3 Piece Kit; Various Models

Reproduction of the original pedal pads to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission. Replacing the pedal pads...

Product#: K920

1967-81 Buick, Chevrolet, Pontiac, Oldsmobile; Brake Pad Trim Plate; with Auto Trans

Correct reproduction of the original chrome brake pad trim bezel designed for use with various GM 1967-81 F, Y, and X body models with automatic transmission brake pads. Manufactured in stampled aluminum featuring a bright...

Product#: K982

1964-82 Buick, Chevy, Pontiac, Oldsmobile; Brake Pedal Pad; with Auto Trans; Drum Brakes

Reproduction of the original brake pedal pad for use on various 1964-82 GM models with automatic transmissions. Manufactured in quality EPDM flexible rubber that makes installation easy when appplying to the brake pedal....

Product#: 3930091

1967-81 Camaro, Firebird, 1968-74 Nova; Brake Pedal Pad; with Auto Trans & Disc Brakes

This correct OER® reproduction of the original brake pedal pad is designed for use on various GM models including 1968-70 Camaros equipped with both an automatic trans and disc brakes. The reproduction features the...

Product#: 3935721

1968-79 Camaro, Nova, 1970-75 Firebird; Brake Pedal Pad; with Manual Trans; OER

This correct OER® reproduction of the original brake pedal pad is designed for use on various GM models including 1968-79 Camaros equipped with both a manual trans and disc brakes. The reproduction features the correct...

Product#: 154822

Universal Frame Mount Manual Brake Pedal Assembly

Frame mount brake pedal assembly for power brake applications. Powder coated in black, each kit comes with pedal pad to complete the assembly. Includes black powder coated brake pedal rod, brake pedal pad and hardware. For...

Product#: 153660Z

3/8"-24 Brake Pedal Clevis; Zinc Plated

Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is zinc...

Product#: *38345

1969-71 Camaro / Firebird Pedal Pad Kit - Disc Brakes - Manual Trans - 4 piece

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 4 piece set includes the 3" brake...

Product#: 153651

Brake Pedal Rod Extension; 4-3/4"; Zinc Plated; Universal Fit

Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod can be cut to your desired length if necessary. Rod measures 4-3/4"...

Product#: *38334

1968-81 GM Pedal Pad Kit; Disc Brake; Auto Trans; 3 Piece Kit; Various Models

Reproduction of the original pedal pads to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission. Replacing the pedal pads...

Product#: 153661

Brake Pedal Rod Extension; 1-1/2" with 3/8" hole; Zinc Plated

Brake pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 1-1/2" overall, hole size is 3/8" on the end, 3/8'-24 threads. Comes...

Product#: 154230

Universal Pedal Rod Extension; 3/8"-24; Extends 6-1/2 to 7-1/2"

Universal fit Pedal Rod Extension with a 3/8-24" thread size commonly used on various classic truck applications to extend the pedal to 6-1/2 to 7-1/2 inches in length. Features grease fitting to keep coupler properly...

Product#: 153660C

Brake Pedal Clevis; Chrome Plated; 3/8"-24

Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is chrome...

Product#: 154233

3/8"-24 Push Rod Extension; 4-3/4" Long; Female / Male Thread

Universal fit Pedal Rod Extension with a 3/8-24" thread size rod that is commonly used on various classic car applications to extend the pedal to 4-3/4 inches in length. Features male / female ends.

Product#: IN3493Z

1964-75 Various GM Vehicles Including Chevelle, GTO, 442; Rubber Pedal Pad/Cover; Clutch or Brake Pedal

Replacement brake and clutch pedal pad/cover for 1964-72 Chevelle, Skylark and Cutlass as well as other General Motors models. Sold individually. See fitment for all applications. For applications without disc brakes and with...

Product#: BG6005

Lokar Black Anodized Billet Aluminum Standard Size 2" x 3" Brake Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: BAG6005

Lokar Billet Aluminum Standard 3" x 2" Brake Pedal Pad with Rubber Inserts

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: XSG6008

Lokar Brake Pedal Pad Standard Size (3" X 2") Black Steel With Rubber Inserts

Black steel brake pedal pad mounts with a 1/2"-20 stud built into the back of it. Made in USA This is the standard-size gloss black brake pedal pad with rubber inserts and measures 3" x 2".

Product#: BG6016

Lokar Black Steel Throttle Assembly W/Rubber Inserts & X-Large 2" X 5" Pedal Pad

Gleaming polish not your style? Then take a look at this stealthy black steel spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left side of the...

Product#: BG6013

Lokar Black Anodized Billet Aluminum Extra Large 2-3/4" X 3-3/4" Brake Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: 90197

Polished Aluminum Brake Pedal Pad

This brake pad features two 1/2" x 20 female holes on the back?one centered and one off-center?allowing for flexible placement to suit your specific installation needs. This design ensures easy alignment and adaptability,...

Product#: K981

1967-87 Buick, Chevrolet, Olds, Pontiac; Brake or Clutch Pedal Pad; Each

Reproduction brake or clutch pedal pad for a variety of GM models equipped with manual transmissions and drum brakes. Manufactured in quality EPDM rubber replicating the original horizontal ribbed design. This pedal pad can...

Product#: K1448

Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set

Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...

Product#: *R5002

1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...

Product#: K911

1967-81 Camaro, Firebird, Nova; Brake & Clutch Pad Trim Plate; Manual, Transmission; Various Models

Correct reproduction brake and clutch pedal pad trim plate for various 1967-81 GM models with manual transmission. Each steel pedal trim plate is designed to replicate the original in fit, appearance and design. {specs}...

Product#: *R5019

1970-71 Camaro Z28 Pedal Pad Kit ; Drum Brakes, Auto Trans; 6 Piece Set

Reproduction of the original pedal pads and trim plates for use on 1970-71 Camaro Z/28 models. This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z/28 models with drum brakes and automatic...

Product#: *R5016

1970-71 Camaro Z28 with Disc Brakes and Automatic Transmission; 5-Piece Pedal Pad Kit

This complete kit is designed to replace pedal pads and trim plates on 1970-71 Z28 models with disc brakes and an automatic transmission. Kit includes Accelerator pedal pad Disc Brake pedal pad with the "Disc Brakes" chrome...

Product#: *R5003

1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models

Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....

Product#: 154237

Universal Adjustable Master Cylinder Pushrod Kit; 3/8"-24 Thread; With Ford Style Eyelet; For Power or Manual Brakes

Adjustable master cylinder pushrod with 3/8-24" thread size rod that is commonly used on various classic Ford and Mercury applications. Features Ford style eyelet with bushing. Fits Mustang, Cougar among other applications....

Product#: BG6012

Lokar Black Anodized Aluminum Throttle Assembly X-Large 2" x 5" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: KW327

1970-71 Camaro, Firebird; Brake and Clutch Pedal Assembly; with Manual Trans; Pair

Reproduction of the original clutch pedal and brake pedal assembly designed for use with 1970-71 Camaro and Firebird models. Each pedal assembly is manufactured in stamped steel and heat treated for long lasting durability....

Product#: BAG6002

Lokar Billet Aluminum Standard 3" x 2" Brake Pedal Pad with Ball Milled Finish

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: G8545

1959-94 GM; Brake & Clutch Pedal Pivot Bushing; Each

Genuine GM brake and clutch pedal bushing for various models. This small bushing is essential to keep the clutch pedal in the proper location. A commonly worn out part which requires replacement periodically. Will fit most GM...

Product#: 154238

Universal Master Cylinder Pushrod Kit; ; Adjustable; 3/8"-24 Thread; Manual Brakes

Adjustable master cylinder manual brake pushrod with 3/8-24" thread size rod that is commonly used on various classic Ford and Mercury applications when converting to dual master cylinder with manual brakes. Kits includes:...

Product#: SG6008

Lokar Chrome Steel Standard 3" x 2" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: BFG6013

Lokar Billet Aluminum Xtra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: BFG6011

Lokar Brushed Billet Aluminum Xtra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Ball Milled Finish

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: PT10

1963-84 Buick, Chevrolet, Oldsmobile, and Pontiac; Brake & Clutch Pedal Shaft Retaining Clip

Reproduction clutch pedal pin clip for 1963-84 GM vehicles with manual transmissions and 5/8" pin on automatic trans models. This retainer clip holds the pin which holds the clutch and brake pedals to the housing under the...

Product#: *R5017

1970-71 Camaro Z28 with Drum Brakes and Manual Transmission Pedal Pad Kit - 7 Piece Set

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

Product#: *R5009

1969-71 GM Pedal Pad Kit Manual Transmission; With Disc Brakes Emblem - 8 Piece

Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...

Product#: *R5018

1970-71 Camaro Z28 with Disc Brakes and Manual Transmission Pedal Pad Kit - 7 Piece Set

This complete kit is designed to replace pedal pads and trim plates on 1970-71 models with floor mounted gas pedal , drum brakes and a manual transmission. For models with the 3" clutch pedal. To ensure proper fit, measure...

Product#: SG6017

Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: TF300227

1942-81 Chevrolet, Pontiac; Brake and Clutch Pedal Rubber Bumper Set; Pair

Reproduction brake and clutch pedal rubber bumpers for various GM models from 1947-1981. Each bumper is designed and manufactured to replicate the original for a perfect replacement. Includes 1 brake and 1 clutch pedal...