1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket for various 1968-79 GM models including 1969-77 Camaro, 1968-71 Impala, 1968-72 Chevelle, 1968-79 Nova, Omega, Apollo, Ventura, and more. Manufactured in stamped steel to factory...
1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Classic $23.99 ea
1970-73 Camaro RS Front License Plate Bracket
Reproduction of the original front license plate bracket designed for use on 1970-73 Camaro Rally Sport (RS) models (with split front bumper). This bracket is manufactured in stamped steel and features an EDP coating for rust...
Reproduction license plate rubber bumpers for various GM models including 1967-68 Camaro front or rear. Each bumper replicates the original in fit and appearance. Will replace the original worn out or missing original rubber...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Classic $7.99 set
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Classic $2.99 set
Nylon Nut; For 1/2" Hole; For 1/4" #14 Screw
Correct nuts needed to mount the valance panel to the lower grill on 1969 Camaro models and needed to attach the license plate to the bracket on 1970-81 models. Fits a wide variety of additional GM models as well. Replaces OE...
4 Piece License Plate Bolt Set with 350 Logo
Dress up your classic with this logo license plate bolt set, with 350 stamped directly into the head of each bolt.
4 Piece License Plate Bolt Set with RS Logo
Dress up your classic with this logo license plate bolt set, with a RS logo stamped directly into the head of each bolt.
4 Piece License Plate Bolt Set with 454 Logo
Dress up your classic with this logo license plate bolt set, with 454 stamped directly into the head of each bolt.
4 Piece License Plate Bolt Set with Bow Tie Logo
Dress up your classic with this logo license plate bolt set, with a Bow Tie logo stamped directly into the head of each bolt.
1970-73 Camaro; Front License Plate Bracket; Standard
Reproduction of the original license plate bracket designed for use with 1970-73 Camaro standard models without the RS option. This bracket mounts to the front valance and the license plate is mounted to it. Manufactured in...
1970-73 Camaro; Front License Plate Bracket Mounting Hardware Set; 4 Pieces
Reproduction front license plate mounting hardware set for 1970-73 Camaro models. This high quality hardware set features the correct size original style stainless steel fasteners with the correct hex washer head. Rest...
1970-73 Camaro; Front License Plate Bracket Mounting Hardware Set; 4 Pieces
Classic $4.99 set
Reproduction rear license plate mounting hardware for various 1969-79 GM models. This high quality hardware set features the correct size original style bolts with the correct black phosphate and oil finish and "RBW"...
1969 Camaro; 1968-71 Impala; 1968-79 Nova; Rear License Plate Bracket Mounting Hardware Set; 2 Pieces
Classic $2.99 set
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
Classic $5.99 set
Chrome Thin Border License Plate Frame with 2 Hole Top Mount
This license frame is heavy cast solid brass and triple chrome plated. It will never rust and will look great for as long as you own your vehicle. Sold individually. Each license frame comes with matching chrome screw caps to...
Slotted Round License Plate Screws 1/4 x 5/8
1/4" x 5/8" license plate mounting screw with 9/16" washer head. Zinc plated for corrosion resistance.
1969-77 Camaro, 1973-74 X Body; Rear License Bracket Rubber Bumpers; 13/16" Tall; Pair
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1969-77 Camaro, 1973-74 X Body; Rear License Bracket Rubber Bumpers; 13/16" Tall; Pair
Classic $4.99 pr
Show and Go License Plate Transport
This Show & Go license plate transport installs below the bumper or valance panel to display the license plate on the front of your vehicle or hide it for shows. This retractable license plate holder is perfect for any show...
These super bright LED stainless steel fasteners allow you to create a custom look like no other hardware. Features: Super Bright LED Fastener Stainless Steel Housing Perfect For License Plate 8-1/2" Wire Leads 2 Wires (Hard...