Product#: 9793565

1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter

Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Features the correct recessed bottom. Fits models with a 3...

Product#: 3921147W

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...

Product#: MT3194Z

1964-66 Pontiac GTO, LeMans, Tempest; Clutch Bell Crank; Cross Shaft

New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....

Product#: 3921147B

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...

Product#: 3922525

1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;

Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...

Product#: MT3207Z

1964-66 Pontiac GTO, Oldsmobile Cutlass, Buick Skylark; Upper Clutch Rod

Reproduction of the correct clutch rod for 1964-66 Pontiac GTO, Oldsmobile 442 and Buick Skylark models. Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from...

Product#: CP1608G

1964-66 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass; Manual Transmission; Hurst 4-Speed Shifter; Adapter Bracket

Cast aluminum Hurst 4 speed shifter mounting plate/bracket for 1964-66 Pontiac GTO, LeMans, Tempest and 1964-66 Oldsmobile Cutlass models. This reproduction shifter bracket allows the factory Hurst 4-speed to a Muncie...

Product#: CP2497Z

1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield

Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...

Product#: FMB70

Lokar Floor Shifter Boot with Stainless Steel Ring

This floor mount shifter boot and retaining ring are the perfect match for Lokar's floor mount shifter. Made in USA Inner ring dimension s measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Product#: 3917535

Hurst; Street Supershifter 4-Speed Shifter; 3 & 4 Speed Top-Loader Transmissions

Hurst Street Supershifter universal 4-speed shifter. They feature a 7 1/2" tall chrome-plates steel stick with 4 3/4" of knob throw and adjustable stops to prevent overshifts. Installation kit and console/floor pan...

Product#: 5381000

Hurst; Nitro Stick Shift Handle; With Built-In 12V Switch; Anodized Aluminum Finish

The Hurst Nitro Stick shift handle is designed to bring the classic 'pistol grip' well into the 21st Century. Machined from billet 7075 aluminum, brushed then given a clear anodized finish, the Nitro stick provides a positive...

Product#: 11557

1964-77 Pontiac With V8 Engines - 166 Tooth Ram Billet Steel Flywheel (10.5-11" Dia)

Ram True Balance billet steel flywheels are recommended as a replacement for factory cast flywheels in high performance and racing vehicles. Cast flywheels are not explosion proof and can be dangerous when used in high...

Product#: M37010

MOMO Trofeo Shift Knob - Mohogany / Beech Wood

The MOMO Trofeo shift knob is born through extensive prototyping to find the perfect ergonomics for the driving enthusiast in a manual vehicle. It can be grasped in the palm of the hand but is equally adept for three-finger...

Product#: MS11069BK

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Gloss black

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11069CA

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Clear anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11069CL

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Clear coat

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: LK611

Lokar Brushed Billet Aluminum Tremec TKO 500-600 Single Bend 10" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK613B

Lokar Black Billet Aluminum Tremec TKO 500-600 Straight 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK614B

Lokar Black Billet Aluminum Tremec TKO 500-600 Single Bend 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK620B

Lokar Black Billet Aluminum Tremec / Borg Warner T5 T56 Straight 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...