Product#: K143

1962-64 Impala, SS, Bel Air; Back Glass Molding Clip Set

OER® reproduction of the original back window reveal molding clips set designed to fit 1962-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: K142

1963-64 Impala, Bel Air; Windshield Molding Clip Set; 2 Door Hardtop

OER® reproduction of the original windshield reveal molding clips set designed to fit 1963-64 Impala and Super Sport models 2 door hardtop models. This set of clips will replace the old, damaged or worn out originals and...

Product#: MN2103

Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set

Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...

Product#: B1422

1964 Impala; Bel Air; Trunk Split Molding Clip Set

The correct hardware can make a great difference in the finished look or your restoration. When mounting or replacing the trunk center split molding on your 1964 Impala or Bel Air model, use the correct clips for a proper...

Product#: 748841

1960-67 Chevrolet; 1963-66 Buick; 1961-66 Oldsmobile; Quarter Panel, Trunk Molding Capped Retaining Nut

Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...

Product#: B1421

1964 Impala; Quarter Panel Molding Clip Set; LH and RH Sides; 56-Pieces

The correct hardware can make a great difference in the finished look or your restoration. When mounting the quarter panel moldings on your 1964 Impala 2 door (all except 2 door SS), use the correct clips for a proper fit....

Product#: B1411

1964 Impala; Fender Molding Clips Set; 18 Clips, 18 Nuts; except SS Models

The correct hardware can make a great difference in the finished look or your restoration. When mounting the front fender moldings on your 1964 Impala (except SS models), use the correct clips for a proper fit. This set...

Product#: A5196

Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...

Product#: 378362S

1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack

Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...

Product#: 355785S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 353577S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 24171

# 8-18 X 3/8 Phillips Head Sealing Screw; # 9 Head; For Wheel Opening Moldings and Window Reveal Molding Clip; With Bi-Wax Tip

Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...

Product#: B1420

1964 Impala; Door Molding Clip Kit; LH and RH Sides; 30-Pieces

The correct hardware can make a great difference in the finished look or your restoration. When mounting the door moldings on your 1964 Impala 2 door, use the correct clips for a proper fit. This set features the correct...

Product#: B1419

1964 Impala SS; Fender Molding Clips Set; 14 Clips; 14 Nuts

The correct hardware can make a great difference in the finished look or your restoration. When mounting the front fender moldings on your 1964 Impala SS, use the correct clips for a proper fit. This set features the correct...

Product#: A8448

1962-71 GM; Front & Rear Door Molding Fastener, Clip; 1" Long, White Nylon; Requires #8 Tapping Screw; Each

These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...

Product#: *R494

Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...

Product#: A9477

Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw

Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}

Product#: 375480S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 1/8 inch Stud; Fits 1/4 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: B9078

1964 Chevrolet Impala; Exterior Body Side Molding Hardware Set; 2 Door Models

Reproduction and replacement style clips and hardware designed to install the exterior side moldings on 1964 Impala 2 door models. This hardware set includes all the necessary hardware to install a complete set of exterior...

Product#: B14215

1964 Chevrolet; Impala SS; Body Side Molding Clip Set; 2-Door; LH and RH; Original Style

Reproduction body side molding clips and hardware used to mount an Impala SS body side molding kit. Includes correct quarter molding clips and screw-in style door molding end clips. {specs} {fitment}