Product#: F15935

Flowmaster; Universal; 2-1/4" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: F15937

Flowmaster; Universal; 3" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: P1094

Pypes Performance X-Change 3" Crossover X-Pipe; Polished 304 Stainless Steel

X-Change X-Pipes allow you to open and close your exhaust with the bolting or unbolting of dump plates. By exiting before the mufflers, you will make even more power! Because V8's fire unevenly, exhaust exits in pulses rather...

Product#: 10782

Magnaflow Tru-X Pipe 2.5" I.D. x 13.2" Length

MagnaFlow's stamped X- Pipe incorporates a gentler inner radius that allows for better exhaust scavenging, noise cancellation and better balance between clylinder banks. With this design, power is increased while decibel...

Product#: F15920

Flowmaster; Universal; 2-1/2" Balance Pipe Set

Flowmaster offers a pre-fabricated universal balance pipe set to ease the installation of a crossover pipe in a dual-exhaust system. Made in USA Set includes T-pipe connectors, balance pipe and clamps. Emission Note: 50-...

Product#: 10791

Magnaflow Tru-X Crossover 2-1/2" I.D. x 12" Length

MagnaFlow's stainless steel Tru-X crossover pipe represents a significant leap forward in technology over traditional H-Pipes. The gentler radius allows for better exhaust gas scavenging and noise cancellation. Dimensions:...

Product#: P1046

Pypes Polished Stainless Steel 3.5" Header Flange to 3" Pipe Reducer

This welded, 12" extended length reducer connects your headers directly to your Pypes X-pipe to eliminate unnecessary seams, clamps and extra work. Constructed of polished 304 stainless steel and feature a Limited Lifetime...

Product#: P1047

Pypes Polished Stainless Steel 3.5" Header Flange to 2.5" Pipe Reducer

This welded, 12" extended length reducer connects your headers directly to your Pypes X-pipe to eliminate unnecessary seams, clamps and extra work. Constructed of polished 304 stainless steel and feature a Limited Lifetime...

Product#: BWP053

Black Widow Performance; X-Pipe; 3"

Black Widow Exhaust X-Pipes are mandrel bent out of stainless steel and quality-welded for maximum strength. Designed for maximum performance and sound, Black Widow's X-Pipes balance exhaust flow and sound and promote...

Product#: BWP054

Black Widow Performance; Y-Pipe; 2.5"single/2.5" dual

Black Widow Exhaust Y-Pipes are mandrel bent and made out of stainless steel and created for systems with dual downpipes and a single inlet/outlet muffler and for those who want to turn their single muffler system into dual...

Product#: BWP055

Black Widow Performance; Y-Pipe; 3"single/2.5" dual

Black Widow Exhaust Y-Pipes are mandrel bent and made out of stainless steel and created for systems with dual downpipes and a single inlet/outlet muffler and for those who want to turn their single muffler system into dual...

Product#: F15936

Flowmaster; Universal; 2-1/2" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: 10781

Magnaflow Tru-X Pipe 2.5" I.D. x 9.5" Length

MagnaFlow's stamped X- Pipe incorporates a gentler inner radius that allows for better exhaust scavenging, noise cancellation and better balance between clylinder banks. With this design, power is increased while decibel...

Product#: 10792

Magnaflow Tru-X Crossover 3" I.D. x 14" Length

MagnaFlow's stainless steel Tru-X crossover pipe represents a significant leap forward in technology over traditional H-Pipes. The gentler radius allows for better exhaust gas scavenging and noise cancellation. Dimensions:...

Product#: 10790

Magnaflow Tru-X Crossover 2-1/4" I.D. x 12" Length

MagnaFlow's stainless steel Tru-X crossover pipe represents a significant leap forward in technology over traditional H-Pipes. The gentler radius allows for better exhaust gas scavenging and noise cancellation. Dimensions:...

Product#: P1044

Pypes Polished Stainless Steel 3" Header Flange to 2.5" Pipe Reducer

This welded, 12" extended length reducer connects your headers directly to your Pypes X-pipe to eliminate unnecessary seams, clamps and extra work. Constructed of polished 304 stainless steel and feature a Limited Lifetime...

Product#: P1045

Pypes Polished Stainless Steel 3" Header Flange to 3" Pipe Reducer

This welded, 12" extended length reducer connects your headers directly to your Pypes X-pipe to eliminate unnecessary seams, clamps and extra work. Constructed of polished 304 stainless steel and feature a Limited Lifetime...

Product#: BWP052

Black Widow Performance; X-Pipe; 2.5"

Black Widow Exhaust X-Pipes are mandrel bent out of stainless steel and quality-welded for maximum strength. Designed for maximum performance and sound, Black Widow's X-Pipes balance exhaust flow and sound and promote...

Product#: BWP056

Black Widow Performance; Y-Pipe; 3"single/3" dual

Black Widow Exhaust Y-Pipes are mandrel bent and made out of stainless steel and created for systems with dual downpipes and a single inlet/outlet muffler and for those who want to turn their single muffler system into dual...

Product#: H1286

Lake Pipes Cap Kit

This Lake Pipes cap kit is for capping closed your Lake Pipes side exhaust pipes. The kit weighs one pound and ships via UPS.