Product#: E75011

Performer RPM Air Gap Manifold; For Small Block Chevy; Non-EGR; Polished Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E5409

1958-65 Chevrolet 348/409 Large port Performer RPM Dual Quad Intake Manifold With Satin Finish

Performer RPM Dual-Quad intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" Series factory large port or with Edelbrock Performer RPM W-series heads Part # E60819 (so ld separately). This manifold delivers...

Product#: E26011

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Polished Aluminum

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: OF5610

1958-65 Chevrolet BBC W-Engine; 348 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Spread Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: E7159

Chevrolet 348/409 Large ported Edelbrock Performer RPM W-Series Intake Manifold With As Cast Finish

This new Performer RPM intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W-Series" big-block engines with factory large port or with Edelbrock Performer RPM "W-Series" heads Part # E60819 (sold separately) and...

Product#: OF5694

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: OF5603

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Spread Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: E7158

Chevrolet 348/409 Small ported Edelbrock Performer RPM W-Series Intake Manifold With As Cast Finish

This new Performer RPM intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W-Series" big-block engines and will deliver improved performance in the mid to high rpm range when combined with Edelbrock carburetor's....

Product#: OF5492

1958-65 Chevrolet BBC W Engine; 348 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: OF5253

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: E26013

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Black

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: E5419

1955-86 Chevrolet Small Block Edelbrock Three Deuce Intake Manifold For Use with 4 Bolt Carburetors

This triple deuce idle to 5500 RPM non EGR manifold is designed for 1955-86 262-400 c.i.d. small block Chevrolet engines. The manifold has a balanced 180° firing order port runner arrangement and contains an exhaust gas...

Product#: OF6007DP

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser Dual Port 360 Degree Intake Manifold; Single Quad; Square Bore

Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller...

Product#: E27163

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Black Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: OF5617

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Spread Bore; Low Profile

Offenhauser 360 Degree Equa-Flow Single-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E71013

1955-86 Chevrolet Small Block without EGR Performer RPM; Square Bore Intake Manifold; Black Finish

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. Has provisions to machine for an oil...

Product#: OF5693

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E71187

1997-02 Chevrolet LS1 Edelbrock Performer RPM Intake Manifold (Non EGR)

Looking to install a carburetor on an 1997-02 LS1? Edelbrock has you covered. This is a performer RPM 4 barrel non-EGR manifold. Note: 600-800 cfm carburetor recommended. Not legal for pollution controlled vehicle s.

Product#: AFR4812

AFR Eliminator SBC Dual Plane Aluminum Intake Manifold

Fitment Note: Square bore carburetors only and will not fit under stock Corvette hood. Will not fit TBI/TPI 72° Intake Bolt. Cast and machined in the USA {fitment}

Product#: E7501

Performer RPM Air Gap Intake Manifold; Chevy Small Block w/o EGR; Square Bore; Natural Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...