Product#: 153645

1955-64 Chevrolet Bel Air Impala; Disc Brake Caliper Brackets; OE Spindles; w/Small GM Calipers

These disc brake spindle brackets will work with the stock spindles on full size Chevrolet models from 1955-64. Use these to upgrade to front disc brakes using 11" GM rotors and small GM calipers from intermediate GM models....

Product#: A12703

Prevailing Torque Lock Nut; 5/8"-11; USS; Grade 8; Cadmium Plated

Prevailing Torque Lock Nut; 5/8"-11; USS; Grade 8; Cadmium Plated. Sold individually. Specifications: Style: Hex Size: 5/8 in.-11 Across Flats: 10 Grade: 8 Finish: Cadmium and Wax Country of Origin: United States

Product#: H2314

1959-70 Impala / Full Size Front Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for front only.

Product#: A9162

5/8-11 X 2-1/2" Grade 8; Hex Head Bolt; Yellow Zinc Chromate

5/8-11 X 2-1/2" Grade 8; Hex Head Bolt; Yellow Zinc Chromate. Sold individually. Specifications: Head Style: Hex Size: 5/8 in.-11 Across Flats: 10 Grade: 8 Strength: 150,000 PSI Minimum Material: Medium Carbon Alloy Steel...

Product#: F0150

1/2"-20 X 1-1/2" Grade 8 Zinc Yellow

Product#: F0275

1/2"-20 x 2-3/4" Hex Grade 8 Zinc Yellow

Product#: F315050

1/2"-20 Zinc lock nut

Product#: *K9142

Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head

3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}

Product#: BRK3179T

1958-64 Chevrolet; Impala; Rear Disc Brake Caliper Mounting Brackets; Fits Ford Large Axle 9" Rear Ends; (New Torino Style)

Rear disc brake conversion caliper mounting brackets for 1958-64 Chevrolet full size passenger car models using a Ford 9-inch rear end with the large bearing Torino Style axle flange, (bolt spacing 2" x 3.562"). {specs}...

Product#: 1253510

1964-72 GM; Disc Brake Conversion Spindle Nut Set; 18 Pieces

This 18-piece hardware set includes the front rotor and spindle nuts, washers, pins necessary to hold the rotor or drum to the spindle, spindle to the upper/lower control arms and the spindle to the end link. For use with...

Product#: B10415

5/16-18 X 9/16" Self-Tapping Bolt; Each

5/16-18 X 9/16" Self-Tapping Bolt. This is the self-tapping bolt for 1969-75 F-Body front disc brake hose frame bracket and various other vehicles and parts. Brake hose frame bracket requires two each. Use as needed....

Product#: BS7004

1958-70 Impala / Full Size 2" Drop Spindle Brackets - Large Calipers

These disc brake spindle brackets will work with the 2" Drop Disc Brake Spindles (BS7001) for the 1958-70 full size Chevrolet models with large calipers and 12"+ rotors. For smal l calipers and 11" rotors use BS7003)

Product#: 1253509

1964-72 GM; Brake Rotor/Drum Nut Set; 6 Pieces

This hardware set includes the front nuts, washers and pins needed to hold the rotor to the spindle for disc brakes and hub for drum brakes.