Product#: AFR1399

AFR Renegade SBF 20° Cylinder Head 165cc, No EGR or Air Pump, Strip Head, 58cc chambers, Stud Mount, Assembled

AFR's 165cc "Street" cylinder heads are the preferred choice over re-worked factory heads. They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout, in addition...

Product#: AFR1402

AFR Renegade SBF 20° Cylinder Head 165cc ,Street Heads, 58cc chambers, Stud Mount, Assembled

AFR's 165cc "Street" cylinder heads are the preferred choice over re-worked factory heads. They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout, in addition...

Product#: AFR1420

AFR Renegade SBF 20° Cylinder Head 185cc, Street Heads, 72cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1387

AFR Renegade SBF 20° Cylinder Head 185cc, No EGR or Air Pump, Strip Head, 72cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1388

AFR Renegade SBF 20° Cylinder Head 185cc, No EGR or Air Pump, Strip Head, 58cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1422

AFR Renegade SBF 20° Cylinder Head 185cc, Street Heads, 58cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1351

AFR Enforcer SBF Cylinder Head 185cc Street Heads, stud mount; Assembled

AFR's 185cc SBF Enforcer Cylinder heads feature our Permanent Mold ?As-Cast? Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port...

Product#: E77790

Big Block Edelbrock Red Roller Rocker Arms- 7/16", 1.7 Ratio

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...

Product#: 66409C

proform Big Block Push Rod Set 3/8" +.405 Tall Deck

Big Block Push Rod Sets: Heat treated one-piece pushrod sets for ôTall Deckö applications. Includes 16 pushrods in a clamshell package.

Product#: 66935

Proform 3/8"-24 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.

Product#: 60116

1955-95 GM Small Block; Comp Cams Valve Lock Set

This hardened steel, single groove Steel Street Lock with 7° lock angle and 11/32" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street applications with lighter valve...

Product#: 12557390

3/8"-24 Rocker Arm Nut

Don't cheap out with inferior rocker arm nuts--use Melling! These rocker arm nuts from Melling are made from quality-grade steel for strength and durability. They're designed to keep your rocker arms positively locked for...

Product#: E77770

Small Block Edelbrock Red Roller Rocker Arms- 1.5 Ratio For 3/8" Stud

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...

Product#: E9648

Edelbrock Hardened Steel Pushrod Set for Chevy 348/409 W-Series - Set of 16

Edelbrock pushrods are designed for Chevrolet 348/409 ?W? series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum...

Product#: 66950

1955-95 Chevrolet Small Block; 262-400 cid; Proform 3/8" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks through 1986...

Product#: 66951

1955-95 Chevrolet Small Block; 262-400 cid; Proform 7/16" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks with 7/16"...

Product#: 74016

1967-87 Pontiac 326-455CI V8 Valve Spring Retainer Set

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with FEA...

Product#: AR134711

Chevrolet Small Block ARP 3/8"-24 Rocker Arm Studs

ARP high performance rocker arm studs for Chevrolet Small Block engines are made of 8740 chrome moly forgings and heat-treated to 180,000 psi. Excellent for E.T Bracket Racing, limited rule oval track competition and street...

Product#: 61116

Comp Cams Valve Lock Set; Super Locks; 10 Degree Angle; 11/32" Stem Size; 16 Qty

These Comp Cams 611-16 Steel Super Locks™ featuring a lash cap recess, 10° lock angle and 11/32" valve stem size are recommended for all race applications. Super Locks™ have a wider angle (10°) that better...

Product#: 50316

Comp Cams Valve Stem Seal Set; For 11/32" Valves &.530" Guides

Comp Cams valve stem oil seals positive stop teflon. Guide.530 in. Valve size 11/32 in. - 16. Made in USA Sold as a set of 16.