Product#: 3762180

1947-91 GM; License, Headlight, Fan Guard, Door Stop, Door Glass; Rubber Bumper; Each; Various Models

OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...

Product#: K128

1963-64 Impala, Bel Air, Biscayne; Rubber Stopper Kit; 16 piece set

Reproduction of the original style rubber stoppers designed for use on 1963-64 Chevrolet Impala, Bel Air, and Biscayne models. Achieve a clean tailored appearance of your Chevrolet's body panels by replacing the old or worn...

Product#: K1114

1937-80 GM, 1961-64 Impala, 1964-72 El Camino; Gas Door Bumpers; 1937-58 1-prong Door Bumpers; Pair

Correct reproduction rubber bumper for various GM applications. Fits: 1937-1958 GM full size vehicle door bumper, single prong style, front or rear. 1961-64 full size and 1964-72 El Camino gas filler door. Keeps the door from...

Product#: 4410574

Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each

Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.

Product#: A4447

1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models

Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...

Product#: 9841451

1961-83 GM; Seat Back Rubber Bumper Stopper; Various Uses & Models; Each

Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. 1-3/16" long, diameter of...

Product#: FB1057C

1955-76 GM; Hood Adjusting Screw and Bumper; Stainless Steel ; 7/16" x 14

Custom replacement stainless steel hood adjuster designed for use on various GM models as listed below. Each screw comes with a rubber bumpe that matches the original 7/16" x 14 screw. Sold individually. {fitment}

Product#: RD2002

1958-68 GM Full Size Vehicle; Tailgate Bumper; Upper and Lower; 4-Door Station Wagon

Reproduction of the original style rear tailgate bumper designed for use with various 1958-68 GM Full Size 4 door station wagon models. Each bumper is manufactured to correct factory specifications and is fully molded...

Product#: *R1362

1958-64 Fullsize 4 Door Sedan Door Jamb Stoppers

Product#: FB1057B

1955-76 GM; Hood Adjusting Screw and Bumper; Stainless Steel ; 5/16" x 18

Custom replacement stainless steel hood adjuster designed for use on various GM models as listed below. Each screw comes with a rubber bumpe that matches the original 5/16" x 18 screw. Sold individually. {fitment}

Product#: FB1057A

Hood Adjusting Screw and Bumper; Stainless Steel ; 1/4" x 20

Custom replacement stainless steel hood adjuster designed for use on various GM models as listed below. Each screw comes with a rubber bumpe that matches the original 1/4" x 20 screw. Sold individually. {fitment}

Product#: E0361

1949-64 Bel Air, 150, 210, Impala, Biscayne; Upper Rubber Door Bumper; Sedan; Screw-In Style

Quality reproduction screw-in style door jamb stopper for 1949-64 Chevrolet Bel Air, 150, 210, Nomad, Impala, Biscayne, and full size Chevrolet models. Each stopper is manufactured in quality EPDM rubber replicating the...

Product#: EZ3070

1963-64 Impala; Bel Air; Biscayne; Rubber Stopper and Hood Adjuster Bolt Kit; 2-Door Models

Reproduction original style rubber stoppers designed for 1963-64 Impala, Bel Air and Biscayne 2-door models. Achieve a clean tailored appearance of your body panels by replacing the old or worn down rubber stoppers. The...

Product#: RD2003

1959-68 GM Full Size; Tailgate and Trunk Striker Bumper; 2 & 4 Door Station Wagon; Each

Reproduction of the original tailgate and truck latch striker for use with various 1959-68 GM Full Size 2 and 4 door station wagon vehicles. This Hood to Fender Bumper is a quality reproduction of the original GM factory...

Product#: *R1361

1958-64 Fullsize 2 Door Sedan Door Jamb Stoppers

Product#: 3792828

1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models

Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...

Product#: K551

1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models

Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...

Product#: 3868790

1955-1981 GM; Firewall Pad Fastener; Each

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Product#: 4840894

1962-66 Chevrolet; Door Rubber Bumper Set; 4 Piece Set; Various Models

Replacing the rubber door stoppers will help keep your doors aligned correctly while adding a factory fresh appearance to the vehicle. Each rubber bumper is designed and manufactured to exact OE specs. Manufactured in quality...

Product#: 3820023

1962-81 GM; Glove Box Door Arm Rubber Bumper

OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...