Product#: GW842

1958-64 Impala / Full Size Rear Tubular Lower Control Arms

Tubular rear lower control arms are designed to be a direct replacement of the stock arms and reduce the twisting loads at the frame bracket location. One of the weak links in the rear suspension is the frame bracket to the...

Product#: B9296

1959-64 Impala, Bel Air, Biscayne; Boxed Lower Rear Control Arms; Pair

These are upgraded reproduction versions of the lower rear control arms used on 1959-64 Chevrolet Impala, Bel Air, and Biscayne models. The arms are reinforced (boxed) for strength so they are great for vehicles equipped with...

Product#: TBC97

1959-64 Impala Rear Upper Adjustable Control Arm ( 9 inch Ford Rear End)

Made in USA

Product#: GW95

1959-64 Impala / Full Size Heavy Duty Rear Adjustable Upper Control Arm

This heavy duty adjustable upper control arm has a spherical bearing on both ends of the control arm. This double bearing designed arm allows you to adjust pinion angle without using the old style shims. The bearings are...

Product#: GW94

1959-64 Impala / Full Size Rear Adjustable Upper Control Arm

This adjustable upper control arm has a rubber bushing on the rear end side and a spherical bearing on the frame side. The arm allows you to adjust pinion angle without using the old style shims. The spherical bearing swivels...

Product#: 33152G

1959-64 Impala / Full Size With 2 Upper Arms Black Polyurethane Rear Control Arm Bushing Set

Be in control when manuevering through turns, during standing start accelerations, braking or over bumps and berms. These bushings allow the rear end control arm system to function more effectively, adding a higher degree of...

Product#: 33152R

1959-64 Impala / Full Size With 2 Upper Arms Red Polyurethane Rear Control Arm Bushing Set

Be in control when manuevering through turns, during standing start accelerations, braking or over bumps and berms. These bushings allow the rear end control arm system to function more effectively, adding a higher degree of...

Product#: *ETA5864B

1958-64 Tubular Control Arm Set - Black

Tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on one...

Product#: B9297

1959-64 Impala, Bel Air, Biscayne; Rear Control Arm Bolt Set; With Integrated Shock Mounting Studs

Reproduction of the often damaged or rusted rear control arm bolt set. Each set includes two of the special bolts, nuts, and lock washers that are required for mounting the lower eyelet of the shock absorbers to the rear...

Product#: B9299

1958-64 Impala, Bel Air, Biscayne; Rear Control Arm Bolt Set; for Front of Arm

Reproduction of the original style hardware for the rear lower control arms for 1958-64 Impala and Full Size Chevrolet models. Each set includes two 5/8"-18 x 3-7/8" bolts with corresponding nuts. Sold per side. 2 sets...

Product#: A659010B

1959-64 Impala/Full Size Uppper Tubular Trailing Arm - Black Powdercoat

Replace your worn out trailing arms with new CPP Totally Tubular™ arms. Original replacements come with rubber bushings. Totally Tubular™ arms are a stronger alternative to the factory arms and come with our...