Product#: 154898

1974-78 Ford Mustang II; Caliper Bracket Set; Cast Iron; for Stock Height or 2" Drop Spindles; Pair

Our Mustang II caliper brackets are built from cast iron for superior strength. Designed to install on Stock or 2" drop spindles from a 1974-1978 Mustang II coupled with 1978 and newer GM calipers, sold separately. Will fit...

Product#: 153645

1955-64 Chevrolet Bel Air Impala; Disc Brake Caliper Brackets; OE Spindles; w/Small GM Calipers

These disc brake spindle brackets will work with the stock spindles on full size Chevrolet models from 1955-64. Use these to upgrade to front disc brakes using 11" GM rotors and small GM calipers from intermediate GM models....

Product#: H2316

1955-70 Bel Air, 150, 210, Impala, Biscayne Caprice; Brake Drum Anti-Vibration Spring

Lose the anti-vibration spring on your classic full size Chevys? Replacement springs available for 1958-1970 full size cars. Spring fits in the groove around 11" drums. 4 required per vehicle. {fitment}

Product#: J1141

Brake Adjuster Hole Plug Set; 1-1/4" Tall x 9/16" Long x 7/16" Thick; 4-Pieces

Reproduction brake adjuster hole cover / plug for a wide range of GM models including all 1947-91 GM truck models with drum brakes. 1 required for each drum brake assembly. Sold as a set of 4. Measures approximately 1-1/4" X...

Product#: BH400116

1951-64 Chevrolet Drum Brake Shoe Guide Plate

Replacement brake shoe guide plate for all 1958-64 Chevy full size models not equipped with disc brakes.

Product#: A12703

Prevailing Torque Lock Nut; 5/8"-11; USS; Grade 8; Cadmium Plated

Prevailing Torque Lock Nut; 5/8"-11; USS; Grade 8; Cadmium Plated. Sold individually. Specifications: Style: Hex Size: 5/8 in.-11 Across Flats: 10 Grade: 8 Finish: Cadmium and Wax Country of Origin: United States

Product#: H2313

1959-70 Impala / Full Size Front And Rear Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for front and rear.

Product#: H2315

1959-70 Impala / Full Size Rear Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for rear only.

Product#: L06009P

1955-64 Bel Air; Impala; Biscayne; Front Brake Shoe Anchor Bolt Pin with Butterfly Guide Plate; LH or RH

Reproduction front brake shoe anchor bolt and butterfly guide plate for 1955-64 Chevrolet passenger car models. This high quality anchor bolt is manufactured to factory specifications. LH or RH. {specs} {fitment}

Product#: H2314

1959-70 Impala / Full Size Front Self Adjusting Brake Conversion Set

Tired of having to adjust your brakes when doing maintenance? Install this set to take your brakes from their original manual adjusted brakes to self-adjusting brakes. This set is for front only.

Product#: F73183S

1963-76 Impala / Full Size Rear Drum Hold Down Kit

Replacement rear drum brake shoe hold down set fo 1963-76 Chevrolet full size models except 1971-76 station wagons.

Product#: A9162

5/8-11 X 2-1/2" Grade 8; Hex Head Bolt; Yellow Zinc Chromate

5/8-11 X 2-1/2" Grade 8; Hex Head Bolt; Yellow Zinc Chromate. Sold individually. Specifications: Head Style: Hex Size: 5/8 in.-11 Across Flats: 10 Grade: 8 Strength: 150,000 PSI Minimum Material: Medium Carbon Alloy Steel...

Product#: F0150

1/2"-20 X 1-1/2" Grade 8 Zinc Yellow

Product#: F0275

1/2"-20 x 2-3/4" Hex Grade 8 Zinc Yellow

Product#: F315050

1/2"-20 Zinc lock nut

Product#: *K9142

Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head

3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}

Product#: BRK3179T

1958-64 Chevrolet; Impala; Rear Disc Brake Caliper Mounting Brackets; Fits Ford Large Axle 9" Rear Ends; (New Torino Style)

Rear disc brake conversion caliper mounting brackets for 1958-64 Chevrolet full size passenger car models using a Ford 9-inch rear end with the large bearing Torino Style axle flange, (bolt spacing 2" x 3.562"). {specs}...

Product#: B10415

5/16-18 X 9/16" Self-Tapping Bolt; Each

5/16-18 X 9/16" Self-Tapping Bolt. This is the self-tapping bolt for 1969-75 F-Body front disc brake hose frame bracket and various other vehicles and parts. Brake hose frame bracket requires two each. Use as needed....

Product#: BS7004

1958-70 Impala / Full Size 2" Drop Spindle Brackets - Large Calipers

These disc brake spindle brackets will work with the 2" Drop Disc Brake Spindles (BS7001) for the 1958-70 full size Chevrolet models with large calipers and 12"+ rotors. For smal l calipers and 11" rotors use BS7003)