Product#: 8545

Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: J222

OER Logo With Tag Decal

Product#: *R401

Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...

Product#: *R402

Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...

Product#: *R403

Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...

Product#: 5195

Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: CP10A

4" X 1-1/2" Classic Industries Decal

When it comes to quality products, Classic Industries® can't be beat! Our new full color decals can be applied to virtually any clean surface.

Product#: CP10B

8-1/2" x 4" Classic Industries Decal

When it comes to quality products, Classic Industries® can't be beat! Our new full color decals can be applied to virtually any clean surface.

Product#: NT400

Speed Nut; 4 mm

Speed nut designed for use with various original and reproduction emblem mounting studs that have a 4mm stud. This speed nut can be applied to virtually any emblem or product that has a 4mm stud and pressed into the hole for...

Product#: CP10D

3.5" x 9" Classic Industries Sticker Sheet

Proudly display your Classic Industries pride with this quality sticker set! Crafted from durable vinyl, these logo stickers are built to stand up to the elements while keeping a crisp, professional look wherever you place...

Product#: TR16721B

1955 Ford Pickup Truck; Hood Side Emblems

Background around F-100 was originally painted red. Comes pre-painted red, although customers can paint any color they wish. Fits R.H. and L.H. Sold as Pair.

Product#: TR8259F

1955 Ford F-Series Truck; Grill Emblem; "V8"

Reproduction "V8" grille emblem for 1955 Ford F100, F250, and F350 Pickup Truck Models. This high quality reproduction features OE-style die-cast construction with a triple chrome-plated finish. Replaces Ford part # B5C-8259.

Product#: ME00327

Polished Stainless Steel "327" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00376

Polished Stainless Steel "376" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00502

Polished Stainless Steel "502" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00540

Polished Stainless Steel "540" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00302

Polished Stainless Steel "302" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00346

Polished Stainless Steel "346" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00572

Polished Stainless Steel "572" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00383

Polished Stainless Steel "383" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00396

Polished Stainless Steel "397" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00406

Polished Stainless Steel "406" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00454

Polished Stainless Steel "454" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00427

Polished Stainless Steel "427" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00434

Polished Stainless Steel "454" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: TR8259G

1955 Ford F-Series Truck; Grill Emblem; 4-Point Star L6

Reproduction 4-pointed star grille emblem for 1955 Ford F100, F250, and F350 Pickup Truck Models with straight-6 engines. This high quality reproduction features OE-style die-cast construction with a triple chrome-plated...

Product#: TR25622K

1955-56 Ford Pickup Truck; Door Name Plate, Custom Cab; Black; Pair

Simply because black is always the new black, we refashioned Ford's original ivory white colored name plate into a darker piece. Black background delivers a unique look against any colored pickup and raises the chrome pop...

Product#: TR16637A

1953-56 Ford F-Series Pickup Truck; Front Hood Emblem

Zinc die cast with a beautiful luster chrome plated finish. Pre-painted black and red background. Pad sold separately. Sold as each.

Product#: TR25622E

1955-56 Ford F-Series Truck; Door Emblems With Clips; Custom Cab; Ivory; Pair

Reproduction "Custom Cab" door emblems for 1955-56 Ford F100, F250, and F350 Custom Cab Pickup Truck models. This high quality reproduction features OE-style die-cast construction, a triple chrome-plated finish, and baked on...

Product#: 42528G

1953-55 Ford Car/1953-56 Ford Truck; Hood/Tailgate Chrome Emblem; "Overdrive" In Script

Reproduction "Overdrive" trunk or tail gate emblem for 1953-56 Ford sedan, coupe, wagon, or truck. This die-cast chrome script is a direct fit replacement and includes mounting hardware. Replaces Ford part# BF-7042528-BZ8.

Product#: MM3

Magnetic Sign; Look And Enjoy...But Please Don"t Touch!

Make sure people know to "Look And Enjoy...But Please Don't Touch!" with this small but effective magnet.

Product#: TR25622L

1955-56 Ford Pickup Truck; Door Name Plate, Custom Cab Emblem Pad Set; Pair

Reproduction rubber pad with beaded edge for the Custom Cab emblem set on 1955-56 Ford pickup. Mounts on outside of door just below window. Install behind the emblem to protect the paint and the chrome. Includes set of two.

Product#: K18249

1/8 Stud 5/32 Hole Barrel Clip

Product#: MM2268

1947-1992; Emblem Installation Barrel Nut; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; Each

This is the nut needed to allow you to install all emblems for the fenders, header panel and trunk lid, etc. The barrel nut is a push on style versus the original twist on, which will not require removal of body panels for...

Product#: A3401

Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex

Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Used to install 1972 "DODGE" Charger grill emblem. Correct hardware can make any installation job...

Product#: ME00350

Polished Stainless Steel "350" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00364

Polished Stainless Steel "364" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00400

Polished Stainless Steel "400" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00442

Polished Stainless Steel "442" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: K13063

Tubular Barrel Nut Retainer Clip; For Emblem Installation; For 3/32" Stud; Fits 1/8" Diameter Hole in Panel

Specialty barrel nut designed to install emblems on the body. Can be used for fender emblems, quarter panel emblems, and other body emblems. The barrel nut makes installation of emblems easy. Simply put the barrel nut onto...

Product#: 42528H

1953-55 Ford Car/1953-56 Ford Truck; Hood/Tailgate Chrome Emblem; "Fordomatic" In Script

Reproduction "Ford-O-Matic" trunk or tail gate emblem for 1953-56 Ford sedan, coupe, wagon, or truck. This die-cast chrome script is a direct fit replacement and includes mounting hardware. Replaces Ford part# BF-7042528-AZ8.

Product#: TR16638B

1953-56 Ford F-Series Pickup Truck; Hood Emblem Pad

Rubber pad with beaded edge, will prevent body paint from chipping.

Product#: A6021

1/8" Flanged Acorn Thread Cutting Capped Palnut w/ Mastic Sealer

Stamped steel 1/8" flanged pal nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc coating, cap/dome...

Product#: A6023

10-24 Stamped Acorn Palnut; Gold/Yellow Zinc

Stamped steel 10-24 thread palnut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct yellow zinc coating and...

Product#: FD5107

1964-70 Ford Motor Company Antifreeze Tag

Reproduction FoMoCo antifreeze tag. Features the correct font, color and text with specific information.

Product#: A2426

Push-on Flat Nut; Fits 3/16" Stud Size; Measures 3/8" x 5/8"

Universal flat push-on clip used for variuos applications with a 3/16" stud. Clip measures 3/8" x 5/8" and has a black phosphate finish.

Product#: A6022

8-32 Flanged Stamped Acorn Capped Machine Thread Nut w/o Mastic Sealer

Stamped steel 8-32 flanged machine thread nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc...

Product#: TR16637AB

1953-56 Ford F-Series Pickup Truck; Front Hood Emblem; Black

Bring a modern look to your vintage vehicle with this premium black emblem. Same as original emblems but in satin black finish with gloss black accents.

Product#: 15300

Custom LS3 Emblem; Polished Stainless Steel; Adhesive-Backed; Universal Fit

If you've upgraded your vehicles motor to an awesome LS3, then by all means brag! This custom, laser cut, polished stainless steel "LS3" emblem is just as trick as your engine swap! Emblem attaches with top quality 3M...

Product#: 11501047

1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated

OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...

Product#: A13964

Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....

Product#: *A2100K

Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set

Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A3138K

Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set

Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *5195K

Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: *R408

Speed Nut 1/4" Self Thread Cutting - 12 Piece Set

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...

Product#: *A3400K

Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set

Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Product#: *A3401K

Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set

Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...

Product#: A3404

Speed Nut 3/16" Self Thread Cutting - Small Washer - Each

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...

Product#: *MM2267K

Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: *11293K

Barrel Nut; Fits 1/8" Emblem Stud; Fits 3/16" Hole; Spring Steel; Black Phosphate Finish; 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...