Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...


Product#: 6428049

1947-59 Chevy, GMC Pickup Truck; Fuel Tank Sending Unit

Reproduction of the original fuel sending unit installed on all 1947-59 Chevrolet and GMC pickup truck models. Each sending unit is manufactured to factory specifications and includes a brass float, steel screen filter, and...


Product#: 479312

1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float

Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...


Product#: CX5041

1931-64 GM; Fuel Tank Sending Unit; 0-30 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1931-53 Chevrolet and GMC trucks with custom tank under the bed and other GM models up to 1964 that require a 30 ohm sender. Designed for use with OE or aftermarket 0-30 ohm...


Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
NEW

Product#: TK0120

Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...


Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
NEW

Product#: TK0121

Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...


Product#: CX4935

1947-53 Chevy, GMC Truck; Fuel Tank Sending Unit; without Fuel Pickup Line

Fuel gauge not working? Replace your faulty fuel sending unit with a reproduction fuel sending unit for 1947-53 Chevrolet and GMC truck models. Each sending unit is designed to replace the damaged or broken original unit....


Product#: H19250

Holley Easy Level Feul Level Sending Unit w/ LiDAR Technology

The Holley Easy Level sender uses LiDAR technology to precisely measure the depth of fuel remaining in your tank and works with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range...


Product#: AM9109

Autometer; Universal; Fuel Signal Adaptor for Autometer Gauges;

The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy...


Product#: 19161

Holley Sniper EFI; Fuel Tank Sending Unit; 0-90 Ohms

Sniper EFI fuel gauge senders are a big help during your installation. They can be used as a replacement for your existing unit. Or if you decide to upgrade your dash to aftermarket gauges, we have a sending unit with the...


Product#: J1123

36-59 Pickup Fuel Sending Unit Grommet

1936-59 Fuel Sending Unit Wire Floor Grommet: Protect your wiring as it passes through the floor with new grommets.


Product#: B1433

1947-66 Chevrolet/GMC Truck; 1955-57 Bel Air, 150, 210; Fuel Tank Sending Unit Screw Set

Reproduction of the original fuel tank sending unit screws and washers designed for use with 1947-66 Chevrolet, GMC trucks, and 1955-57 Bel Air, 150, 210, and Nomad models as listed. Each set features 5 phillips head screws...


Product#: K405

1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube

Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....


Product#: K404

Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube

Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...


Product#: CX1424

1955-60 Chevy Bel Air. Biscayne, Impala,1931-62 Chevy, GMC Truck; Fuel Tank Sending Unit Mounting Gasket

Reproduction of the original fuel tank sending unit designed for use with 1955-57 Chevy Bel Air, 150, 210, Nomad, and 1931-62 Chevy and GMC pickup truck models. Correct replacement of the original fuel tank sending unit...


Product#: AM3262

Auto Meter Universal Fuel Tank Sending Unit; 240 Ohms Empty, 33 Ohms Full

This is a universal 5-bolt fuel sending unit for use with Auto Meter universal fuel gauges. This unit is not included with the gauges packages and must be purchased separately. It is used with gauges that require 240 ohms...


Product#: FT5034

1949-66 Chevrolet, GMC Truck, 1958-60 Impala, Biscayne, El Camino, Full Size; Fuel Tank Sending Unit Installation Set

Reproduction of the original style components necessary to Install the fuel tank sending unit for 1949-1966 Chevrolet, GMC pickup truck, Suburbans, and 1958-1960 Impala, Bel Air, Biscayne, and full size models as losted. This...