Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1960-81 GM; Body Shim Set; 1/16" Thick, 1-1/4" x 1-1/8"; with 3/8" Bolt Slot; Zinc Plated; 10 Piece Set
Classic $5.99 set
Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate
Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...
1/2"-13 Prevailing Torque Lock Nut; Cadmium Plated
1/2"-13 Prevailing Torque Lock Nut; Grade 8; Cadmuim Plated
Bolt; 1/2"-13 x 5" Lg Hex Head Cap Screw; Grade 8
1/2"-13 x 5" Hex Head Cap Screw; Grade 8
1960-81 GM; Body Mount Shims; 1/8" Thick, 1-1/4" x 1-1/8"; 3/8" Bolt Slot; Zinc Plated; 10 Piece Set
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1960-81 GM; Body Mount Shims; 1/8" Thick, 1-1/4" x 1-1/8"; 3/8" Bolt Slot; Zinc Plated; 10 Piece Set
Classic $5.99 set
1961-1981 GM; Body Shims; 15/64"; 10 Piece Set
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1/2" SAE Flat Washer; Grade 8 High Strength; bright zinc Specifications: Bolt Size : 1/2" Inner Diameter : 17/32" Outer Diameter : 1-1/16" Thickness : 0.097-0.121" Finish : Zinc & Gold Dichromate Grade : 8 Material : 1035...
A true performance application component for cars, trucks, hot rods and racing and competition vehicles ? yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged...
47-54 Pickup Trans Floor Cover Screws
Hardware for the transmission floor cover for 1947-54 models. Now you can replace all those strange screws with a fresh set of correct screws.
1947-54 Pickup Front Cab Mount Bolt Set
Hardware for mounting the front cab for 1947-55 models. Note: The 1955 application refers to 1st series (early) models.
1936-Early 55 Chevrolet/GMC Truck; Bolts; Running Board; 1 Ton
Secures running board to running board braces. Includes special flat top step carriage bolts. {fitment} Made in USA
1947-54 Chevrolet, GMC Pickup Truck; Cab To Frame Mount Pads; Pair
Reproduction of the original cab to frame mount pads for use with 1947-54 Chevrolet and GMC pickup truck models. The front cab mount pads are made from rubber and have a mounting hole in the center. The pads install between...
1947-1949 Chevy, GMC Pickup Truck; Radiator Mount Cushion; Each
Reproduction of the original radiator mount cushion for use with 1947-49 Chevrolet and GMC pickup truck models. Manufactured in EPDM rubber, this radiator mounting pad will give your radiator the proper padding and insulation...
#8 x 1/2"; Teks Self-Drilling; Phillips Pan Head; Zinc-Plated
This #8-18 x 1/2" Phillips pan head Teks self-tapping screw is Zinc plated steel and sold as each. Product Specifications: Teks tapping screw #2 Teks point Phillips pan head Size: 8 x 1/2"
Hex Bolt; 1/2"-13 x 7" Long; Grade 5; Zinc Chromate
Hex Bolt; 1/2"-13 x 7" Long; Grade 5; Zinc Chromate Applications 1973-1980 Chevrolet/GMC Rear Cab Mount Bolt; 4WD 1/2 Ton 1973-1980 Chevrolet/GMC Rear Cab Mount Bolt; 2WD & 4WD 3/4 Ton
1947-55 Chevy, GMC Pickup; Cab to Frame Mounting Hardware Set
Reproduction of the original piclup truck cab to frame mounting hardware for use with 1947-55 model trucks. Each cab mounting set includes bushings and hardware for a complete replacement. For use with 1st design (early...
1957-86 GM; 1/2" Bolt Size; Medium Split Lock Washer; 18-8 Stainless Steel; Various Models
1/2" split lock-washer used in a variety of applications including on bumper brackets among many other uses. 1/2" Medium Split Washer 18-8 Stainless Steel. 1/2" ID, 7/8" OD, 0.125 thick. Lock Washer Specifications Finish:...
1957-86 GM; 1/2" Bolt Size; Medium Split Lock Washer; 18-8 Stainless Steel; Various Models
Classic $0.69 ea