Product#: 8545

Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: J222

OER Logo With Tag Decal

Product#: *R401

Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...

Product#: *R402

Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...

Product#: *R403

Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...

Product#: 5195

Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...

Product#: GF18000

"Objects In Mirror Are Losing " Exterior Side Mirror Decal; 4" x 5/8"

This is a crack up and a must have. Decal reads "OBJECTS IN MIRROR ARE LOSING".

Product#: CP10A

4" X 1-1/2" Classic Industries Decal

When it comes to quality products, Classic Industries® can't be beat! Our new full color decals can be applied to virtually any clean surface.

Product#: CP10B

8-1/2" x 4" Classic Industries Decal

When it comes to quality products, Classic Industries® can't be beat! Our new full color decals can be applied to virtually any clean surface.

Product#: NT400

Speed Nut; 4 mm

Speed nut designed for use with various original and reproduction emblem mounting studs that have a 4mm stud. This speed nut can be applied to virtually any emblem or product that has a 4mm stud and pressed into the hole for...

Product#: CP10D

3.5" x 9" Classic Industries Sticker Sheet

When it comes to quality products, Classic Industries® can't be beat! Our new full color decals can be applied to virtually any clean surface.

Product#: DC36

327 275-HP Black and Gold Turbo-Fire Valve Cover Decal (OE#3889321)

Restore your vehicle's engine bay to showroom new condition with this high quality reproduction. Each decal is produced to the exact dimensions of the originals. This black-and-gold valve cover decal displays your engine's...

Product#: CX1872

Fender Skirt Star Emblem

This star is a custom exterior trim accessory to dress up your fender skirts. This quality reproduction is cast metal and chrome plated with two studs to mount to your fender skirts or anywhere you like. Sold individually....

Product#: ME00376

Polished Stainless Steel "376" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00327

Polished Stainless Steel "327" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00346

Polished Stainless Steel "346" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00502

Polished Stainless Steel "502" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00540

Polished Stainless Steel "540" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00302

Polished Stainless Steel "302" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00572

Polished Stainless Steel "572" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00383

Polished Stainless Steel "383" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00396

Polished Stainless Steel "397" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00427

Polished Stainless Steel "427" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00434

Polished Stainless Steel "454" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00406

Polished Stainless Steel "406" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00454

Polished Stainless Steel "454" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: DC369

7" Blue On White Chevrolet Bow Tie Decal

Show off your Chevy pride with this vintage Chevrolet Bow Tie decal that features the correct font and is blue on a white background. Ideal for application on your Chevy's windows, your toolbox or anywhere else with a smooth...

Product#: DC368

13" Blue On White Chevrolet Bow Tie Decal

Show off your Chevy pride with this vintage Chevrolet Bow Tie decal that features the correct font and is blue on a white background. Ideal for application on your Chevy's windows, your toolbox or anywhere else with a smooth...

Product#: BS73

Chevrolet Power Sticker White

Custom sticker which reads "Chevrolet Power" with the word Chevrolet inset within a Bow Tie logo, all die-cut in white. Made in USA Officially Licensed by General Motors

Product#: RB6

6" X 12" Die Cut Kickin" Asphalt Decal

Display it proudly! High quality pressure sensitive decal with the Bow Tie and Kickn' Asphalt logos. Simply peel and apply to any clean surface. Officially Licensed by General Motors

Product#: DC645

1950-60 Washer Bottle Bracket Decal

Correct replacement decal installs on all 1950-60 Chevrolet washer bottle brackets. This decal was used for a variety of models covering the 1950-60 era. Indicates where the solvent level should be and what to do during...

Product#: DC603

5" Chevrolet Special Equipment Decal

Show off some vintage style with this "Chevrolet Special Equipment" decal. Chevrolet Special Equipment (precursor to today's GM Performance Parts) offered high performance parts for Chevy vehicles over-the-counter at...

Product#: DC862

1949-60 Methanol Anti-Freeze Tag

This correct factory tag identifies the cooling system as one that uses a methanol based anti-freeze versus ethylene glycol. Officially Licensed GM Restoration Part® Made in USA

Product#: MM3

Magnetic Sign; Look And Enjoy...But Please Don"t Touch!

Make sure people know to "Look And Enjoy...But Please Don't Touch!" with this small but effective magnet.

Product#: DC1316

7" Blue On Clear Chevrolet Bow Tie Decal

Show off your Chevy pride with this vintage Chevrolet Bow Tie decal that features the correct font and is blue on a clear background. Ideal for application on your Chevy's windows, your toolbox or anywhere else with a smooth...

Product#: DC604

8" Chevrolet Special Equipment Decal

Show off some vintage style with this "Chevrolet Special Equipment" decal. Chevrolet Special Equipment (precursor to today's GM Performance Parts) offered high performance parts for Chevy vehicles over-the-counter at...

Product#: DC1317

13" Blue On Clear Chevrolet Bow Tie Decal

Show off your Chevy pride with this vintage Chevrolet Bow Tie decal that features the correct font and is blue on a clear background. Ideal for application on your Chevy's windows, your toolbox or anywhere else with a smooth...

Product#: DH1016

Dick Harrell Chrome Automotive Decal

Show your support for one of the truly great pioneers of drag racing - "Mr Chevrolet". Decal is 6-3/4" x 3-1/2", chrome backed with red print showing the Dick Harrell Performance Center badge. Made in USA

Product#: DC894

1940-50 Trico Washer Bracket decal

Correct reproduction of the original washer bracket decal for use with Trico washer systems. Made in USA Note: Always be sure to clean the surface before applying the decal.

Product#: K18249

1/8 Stud 5/32 Hole Barrel Clip

Product#: MM2268

1947-1992; Emblem Installation Barrel Nut; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; Each

This is the nut needed to allow you to install all emblems for the fenders, header panel and trunk lid, etc. The barrel nut is a push on style versus the original twist on, which will not require removal of body panels for...

Product#: A3401

Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex

Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Used to install 1972 "DODGE" Charger grill emblem. Correct hardware can make any installation job...

Product#: ME00350

Polished Stainless Steel "350" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00364

Polished Stainless Steel "364" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00400

Polished Stainless Steel "400" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: ME00442

Polished Stainless Steel "442" Fender Engine cid Callout Emblems; Flat Panel

Morris Classic Concepts flat polished stainless steel engine cubic inch callout emblems will adhere to most any flat surface. Engine size emblems are laser cut in the factory font from 0.09" thick mirror-polished stainless...

Product#: K13063

Tubular Barrel Nut Retainer Clip; For Emblem Installation; For 3/32" Stud; Fits 1/8" Diameter Hole in Panel

Specialty barrel nut designed to install emblems on the body. Can be used for fender emblems, quarter panel emblems, and other body emblems. The barrel nut makes installation of emblems easy. Simply put the barrel nut onto...

Product#: DC602

3" Chevrolet Special Equipment Decal

Show off some vintage style with this "Chevrolet Special Equipment" decal. Chevrolet Special Equipment (precursor to today's GM Performance Parts) offered high performance parts for Chevy vehicles over-the-counter at...

Product#: DZ277

Delco Battery Decal

This sticker certifies all Chevrolet Trucks equipped with Delco batteries. Yellow print on black as original. Officially Licensed GM Restoration Part® Made in USA Note: Always be sure to clean the surface before applying...

Product#: DC394

8" GM Chevrolet Genuine Parts Decal

Once used by dealership parts departments and garages across the USA, this great vintage GM Chevrolet Genuine Parts decal will look great in your shop, garage or on your tool box! Each adhesive backed decal measures 8" x...

Product#: DC244

1941-49 Trico Washer Decal

This early edition of the washer lid decal is reproduced to exact specifications. For use with Trico washer systems. {fitment} Made in USA Note: Always be sure to clean the surface before applying the decal.

Product#: A6021

1/8" Flanged Acorn Thread Cutting Capped Palnut w/ Mastic Sealer

Stamped steel 1/8" flanged pal nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc coating, cap/dome...

Product#: A6023

10-24 Stamped Acorn Palnut; Gold/Yellow Zinc

Stamped steel 10-24 thread palnut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct yellow zinc coating and...

Product#: DC978

153 Super Thrift 90 HP Valve Cover Decal

Restore your vehicle's engine bay to showroom new condition with this high quality reproduction. Each decal is produced to the exact dimensions of the originals. This black-and-gold valve cover decal prominently displays your...

Product#: A2426

Push-on Flat Nut; Fits 3/16" Stud Size; Measures 3/8" x 5/8"

Universal flat push-on clip used for variuos applications with a 3/16" stud. Clip measures 3/8" x 5/8" and has a black phosphate finish.

Product#: A6022

8-32 Flanged Stamped Acorn Capped Machine Thread Nut w/o Mastic Sealer

Stamped steel 8-32 flanged machine thread nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc...

Product#: 15300

Custom LS3 Emblem; Polished Stainless Steel; Adhesive-Backed; Universal Fit

If you've upgraded your vehicles motor to an awesome LS3, then by all means brag! This custom, laser cut, polished stainless steel "LS3" emblem is just as trick as your engine swap! Emblem attaches with top quality 3M...

Product#: 11501047

1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated

OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...

Product#: A13964

Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....

Product#: *R408

Speed Nut 1/4" Self Thread Cutting - 12 Piece Set

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...